Find a professional gate installation in Wollert

current lock at side gate is faulty, looking to change lock method that can be access from outside and inside

Looking for supply and install of a single gate in the side passage of our property in Wollert. The passage runs between the house brick wall and the timber boundary fence on the south side. Gate specifications: ∙ Width: approx 900mm (passage width — please confirm on site) ∙ Height: 1.8m to match existing timber boundary fence ∙ Material: Aluminium or Colorbond steel preferred. No timber — needs to handle heavy wind without warping, rotting or rattling. Open to suggestions on best material for this location. ∙ Style: Flat panel or slat style, no gaps preferred for privacy and wind resistance. Solid panel will cop less wind stress than an open slat design. ∙ Colour: Something that works alongside red brick house and timber fence — charcoal, monument or woodland grey would suit. ∙ Hardware: Heavy-duty self-closing hinges rated for wind, D-handle with key lock both sides. Gate must open inward (towards rear yard) so it doesn’t block the passage. ∙ Frame: Gate posts to be fixed into brick wall on one side and timber fence post on the other. If existing fence post isn’t strong enough, include a new steel post in the quote. The passage has an A/C condenser and heat pump nearby so access is a bit tight. Site photos available showing the passage width and mounting points. Property is a new build in Wollert which gets very windy — durability and low maintenance are the priority over aesthetics. Please include quote validity and estimated timeline. Happy to bundle with other works on the property if pricing works out.​​​​​​​​​​​​​​​​

Hi, my back fence has been damaged due to recent weather and needs to be repaired. There is also minor damage to the wall where the fence connects to the house. I’m looking to have this fixed as soon as possible in the most budget-friendly way. I’m happy to supply any materials needed from Bunnings if that helps. Please let me know your availability and an estimated cost. Thank you.

Install a fence gate along with a fixed panel on the side of my property. The door to be 1500mm wide and fixed panel to be 500mm wide. I want both panels and door to be 1800mm high. I want colour bond to be used. I want supply and install.

Need gate latch installed. I have the latch and screws, just dont have the right drill / bit

I have a PVC side gate (1800mm) that I want installed. - I have the side post (50mm x 50mm) steel, 2.4m long (to be concreted in) - And return post (50mm x 50mm), 1.8m long (to be attached to brick wall) - I also have TEK screws for metal I need the gate installed, including supply of latch + hinge

Just need to install a side fence gate 1.1 m wide approx

1. 1.8m height colorbond fence* (2.4m posts concreted in 600mm deep footings 1.8m height colorbond sheets)- 19m 2. 1.8m high colorbond locked panel on the RHS- 1 3. Single colorbond gate 900mm wide x 1.8m high and locked panel on the LHS- 1 Colour- Woodland Grey®

Attached are pictures of what is there now, however it's broken and the company that installed it is not active anymore. It's pressure mounted and custom fit. Happy to buy whatever products you may need.

I require installation of a PVC/Aluminum Hampton style gate approx 1800 high x 1100 wide purchased via special orders from Bunnings. There are two matching posts. I have all hardware i.e screws, bolts, hinges and latches required so everything supplied. I require proper and professional installation!

Install a side gate to the backyard. Colour matching to the existing fence. Tasker to provide all materials required.

Front sliding gate installation. Front 32 m

There are water patches on the garage ceiling plasterboard that develop under heavy rain. They are approximately in line with the flashing on the roof over the garage where the roof meets the second storey brickwork. There is possibly a second leak towards the gutter on the boundary side. The roof is lined with flat concrete roof tiles. Refer to the photos attached. Please quote for the following: 1. Investigate the leaks and identify areas that require repairing. 2. Assess any damage to the ceiling plasterboard and frame caused by the leak. 3. Apply a permanent repair that is compliant with the Building Code of Australia.

New stronger latch needed for fence gate. Gap is about 1 inch so longer latch needed.

I need one metal side door in wollert east Sample in photo Looking for quote

Fix a colourbond fence gate between my wall and my neighbour's? Width is 1.8m.

Can I get a quote for a colourbond fence gate between my wall and my neighbour's? Width is 1.8m. Thanks

I need to done fence here with gate in wollert

Need a gate put up on the side of my house thinking maybe colorbond , side is about a meter wide