Find a professional gate installation in Chatswood

We’re looking for an experienced person to sand back and repaint our metal front security gate (see photos). Scope of work: - Sand back flaking paint (full prep, not just touch-ups) - Prime with metal primer - Apply 2 x top coats of exterior metal paint - Protect surrounding brickwork/tiles during work - Clean up after completion Gate details: - Single hinged metal security gate with arched top - Approx standard door size (around 2m high) - Some visible paint wear - Currently painted black – we’d like to keep it black (open to satin or semi-gloss recommendation) Requirements: - Experience with exterior metal painting - Please specify what primer and paint you intend to use - Must supply own tools and materials - Looking for a durable, neat finish

To install a double gate (2 panels, poles and hardwares provided) on a driveway. Total Width= 2.5m, Height=1.8m: -core-drill one pole into ground - attach one pole to existing side fence of property -install swivel brake caster wheel (provided) to support the 1.5m side of the gate -install hinges to panels (2) of the gate (bi-folding opening) -install both latch lock and digital lock -install drop pin (into ground) to position gate while shut.

I need a fence gate rehung as it has become disconnected from the wall. I also need 3 retractable garden hoses mounted.

Looking for a handy person or gate specialist to adjust two aluminium pedestrian gates that are no longer latching properly. ​ ​The Issue: The gates have likely sagged or shifted slightly, meaning the latch is misaligned with the striker plate by a few millimeters. ​The Gates: Standard lightweight aluminium slats. ​The Goal: Adjust the hinges or the latch housing so both gates swing and click shut securely. ​Access: Very easy access in Chatswood. You can park right outside. ​Requirements: ​Please bring your own tools (drill, drivers, possibly a level). ​Experience with standard gravity latches is a plus. ​Available to complete before 24th Dec ​Location: Chatswood, 2067.

Hi there We need a gate installed across the driveway to secure the dogs in the yard. We have no idea which gate. Don’t mind if it is electric or manual double door, most cost affective would be best. We don’t have the measurements, however I can meet you there to measure if needed to quote. I have attached pics with a red line across where we are hoping to install. Please let me know if you need anything else to quote.

I’m looking for a quote for a swinging driveway gate, 2.8 m wide and 1.1 m high, that opens inwards. The gate will have timber slats installed on the frame. Please provide a price based on these specifications. The amount I’ve allocated is indicative and not exact just looking for a ballpark figure.

Front gate that catches when closing. ? 1 side has dropped Current screws appear rusty? Risk of snapping when loosened or tightened

The gate details. Height: 180 cms Width: 120 cms Wall to wall width: 128.5cms The gate is not supplied. Please quote for the gate plus installation. The third photo shows the type of slat gate I require

Pool gate X 2 needs to be fixed

We have 2 bookshelves and 1 cupboard that need to be anchored to walls as well as 2x baby gates that need to be installed at either end of our stair case

The top of the gate has broken off. Need it to be glued back on. I have tried superglue but need something stronger like silicone. Should take less than 5 mins if you have the right adhesive on hand! Ideally would like you to use grey or clear silicone to match. See pics Location: Chatswood

Replace the car place and replace posts

Metal gate, railing on verandah of fancy wrought iron and outdoor furniture need to be wire brushed, sanded, rust treat railing and gate, then all painted black.

We have a small cafe in an office building. There is a small swing door which separated the public area from the staff only section. The doors lock is failing and not lockable. We hope to have an installer recommend and install a cost effective lockable lock in replacement of the current mini bolt lock.

The bolt attaching the front gate post to the brick wall breaks off into 2 pieces due to heavy rusting. The post need to be refited to the brick wall with new bolt (preferably one that is more rust proof and last longer).

Front picket fence gate won’t close as the bottom of the gate is dragging/caught on the walkway tiles. - Due date: Flexible

My automatic gate is making a lot of noise and vibrating as it struggles to open and close properly Please let me know any other details needed - Due date: Flexible

Re hang a gate that has fallen off. - Due date: Before Friday, 8 December 2023

We want to create a new fence for our front yard, using the existing brick wall as the base and add a 900 mm high picket style fence on top if possible. The brick wall acts as a retaining wall and needs to be repaired in some parts as it is leaning and some bits have come off. Also need to add a paedestrian gate approximately 1 meter wide and two gates for the driveway approximately 3 meters wide. Gates would need to be at least 1.2 meters high. - Due date: Flexible

I need a handyman to replace my bathroom fan and install garden gate latch. Parts provided. - Due date: Before Friday, 30 December 2022