Find professional garden shed repair in Sydney Northern Beaches

Need garden shed assembled Approx 1.5 x 1.5

I have a absco garden shed to erect. 3m long x 1.52 wide x 2.08m high. https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-monument-space-saver-double-door-garden-shed_p0079540

We have a new garden shed (Easy Shed), still in its box. 2.08 long and 0.97 wide. so not too big. Also have 18 40cmx40cm pavers to move into place and lay as straight as possible for the base for the shed to sit on.

Erection of a garden shed 2.25m by 2.25m. no concrete slab required

This task is to build a assemble a Stratco Handi-Pod (HP1) shed to the manufacturer's installation instructions, on an existing concrete slab. The shed will need to be anchored into the slab, so will require the use of your own masonry drill. The shed should also be sealed with silicone (or similar)around the base to prevent water ingress. The shed is new and onsite ready to assemble. Tools noted in installation guide as required: • Rivet Gun • Caulking Gun & Silicone • Cordless Drill • Hammer Drill (if Cordless Drill has no Hammer function) • 5/16 Hex-head & PH2 Phillips-head Bit (Supplied in Kit) • 10mm Masonry Drill Bit • 3.5mm Drill Bit (Supplied in Kit) • Ladder, Tape Measure Shed link: https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-pod-sheds/handi-pod-hinged-door-garden-shed-hp-1-slate-grey-hpgs21701410sg/ Shed install instructions link: https://www.stratco.com.au/siteassets/pdfs/handi-pod-garden-shed---hp1---install-guide.pdf

2.3 x 2.3 x 2.3 colorbond steel garden shed to be assembled

assembly of flat pack outdoor shed 1.41 x 0.72m

Install 2 Greenspan sheds.

We need a slab laid for a garden shed. Shed is 2170mm x 1410mm and slab needs to be 100-200mm larger in each direction. Slab must be rebated to suit the shed dimensions. The site is sloped but I will level it for you. See area marked in red in first photo for shed location. I have plenty of 20-30mm aggregate if you wish to use that for the base. We have other concreting works which we need done we can be discussed.

I need a base | slab for a garden shed. The shed is 3M x 3M, so a bit bigger all round. I don't think any excavation is required, but if so I'll do it.

Assemble a garden shed 1500 x 800 x 1900H. I have already built all the panels, but being a full time parent am short on time to complete the assembly onto a concrete slab (slab also done)

Putting together a flat pack small garden shed.

Looking for an experienced shed builder to put together an Easy Shed garden shed, asap.

Build Absco garden shed and affix to the base as shown. 2.26 x x1.4 x 2 Monument Regent single door garden shed - Bunnings

Need someone to assemble 3m x 1.9m x 2.1m Skillion Roof Garden from Easyshed

Dismantle and remove a 3.1m x 2.7m garden shed and two shelves. Bring own equipment.

New garden Shed to assemble. 1.9x1.09x2.85

Flat pack assembly and install of garden shed size - Garden Shed 1.94x1.21M Sheds Outdoor Storage Workshop House Tool Shelter Sliding Door

I’ve put together all panels of an aluminum garden shed but cannot put it together. Need help for the final assembly, won’t be anchoring to a slab. Needs to be done on a weekend.

Want a slab for a garden shed laid. Slab will be 2.5M x 3m. The ground is level