Find experienced local fencing contractors in Seaforth NSW

A 1m panel of our pool fence has fallen (during recent high winds), and needs repairing

I require a glass gate to be relocated from one place to another. Gate is the right size for its new location. Gate hinges can just be screwed to existing metal glass fence post, However, the gate may need a small wooden batten for the bolt to go into. The gate may also potentially need a new bolt/lock mechanism.

Fencing is loose, which needs to be reconnected. Because the fencing is on a cliff, immediate repair is needed.

I need a few of bamboo fences to be replaced

Repair 1 section of detail rail fence, remove old concrete, bend rail back into shape, set new concrete. (I accidentally reversed into the fence)

We have an old fence down the side of our property that has collapsed under the weight of the neighbours vines. I'm keen for you to cement in two support metal poles to prop the fence back up. The metal poles work well on supporting other parts of the fence.

Need 2 middle posts installed and horizontal screens cut to size and reinstalled

Build 12 m 1.6m high picket fence. Will require an onsite measure and quote.

Gate & fence post snapped in high winds. Requires replacement fence post to be installed, with gate rehung (gate should be largely reusable)

Job has been allocated to a tradie and is now closed. Thanks for your interest

13m of cyclone fencing, including two gates, installed over uneven ground. 2 metres high with top rail, similar to existing fence. Preferably with matching green plastic coated chain wire, but this is not essential. Fence extends circa 13 metres from existing fence (as shown in the photos) to the rock face parallel with the top of the timber stairs (also shown in photos). One large pedestrian gate (900mm) allowing access from the main concrete landing where the steel handrail thickness thins. One additional pedestrian gate (600mm) approx 1 metre from the top of the fence. The bottom of the chain wire will need to be close to the ground so as to prevent chickens escaping. Need to inspect prior to quoting.

Timber fence is not high enough and doesn't meet pool fence requirements. Existing timber top rail to be replaced with new toprail + 100m stud + additional toprail. Refer specification. Easily accessible from rear lane. Quotation to include for supply and fix of new timber section, all fixings and cart away of existing top rail. Total run = 16 liner metre approx.

Boundary fence remove and replace new ensuring pool compliance at rear of property. Length is about 46 m. I will need 2.1 high for pool area which is about 10m then the rest can be say 1.8. I'm on the higher side of boundary so I could go to 2.1 if neighbour and dividing fence act allows that. Pool equipment will be removed and vegetation trimmed so access will be improved. - Due date: Flexible

Our glass pool fence is fixed into a timber deck. The gates automatic closing mechanism ( bottom of gate and appears hydraulic) is not shutting the gate; and the gate seems slightly misaligned to the rest of the fence so it is not locking. - Due date: Flexible

I have an aged timber fence with fallen palings and rotten post, have section leaning to one side. Would like quote to repair - Due date: Flexible

back fence is collapsing need it rebuilt only a section of back fence - Due date: Before Thursday, 25 May 2023

Need a boundary fence built between my neighbour and myself. Approx 10-12 metres long. Would prefer material to be wood or similar, please include material cost and labour in quote. In the photo the fence would be built separating the brickwork and dirt/grass area - Due date: Flexible

See pics The front post has rotted at the bottom causing the fence to lean. I need it replaced and the fence height reduced along the white lines as shown. - Due date: Flexible

Install wooden lattice to top of driveway gate for privacy

Install a lokklatch to an existing timber gate with metal frame