Find experienced local fencing contractors in Helensvale

We need to extend our existing fence for more privacy. I'm not sure how long the fence is, but roughly would be 15 metres. I need someone to use treated pine, provide all tools and weather proof screws, etc. Helensvale location.

Supply and install 1.2m high aluminium pool-style fencing along both sides of the waterfront walkway, as marked in red in the photos. The old fence in the photo has been removed. Each side is approximately 2 metres long — around 4 metres total. Fence should be securely fixed to the existing timber deck The first section is 78cm, then change direction, 2m in total on one side, then another 2m on the other side.

Rectify issues identified in pool safety inspection and install a new metal pool fence of approximately 5m (please see attached photos). Not sure of cost and so tentatively set a budget of $1000.

Replace approximately 20m of timber fencing with Colourbond

Replace old timber side fence with Colourbond preferred.

Dismantling and removal of disintegrating brick fence. Replaced with Colorbond fencing - 4000mm.

Remove and replace pool latch at Helensvale

I reinstalled a colour bond gate for a client after pouring their driveway. It needs to be pulled down and reinstalled more level for the gate to lock but been too busy to go back.

Glass panel is misaligned / out of position, need adjustment

Looking for someone to put up a colour bond fence 25 mtrs all materials supplied

We have had a new side fence done but they did not complete and I need the return done from fence line to side of house

Fence needs to be fixed. No replacement as much as possible.

My fence lock has broken off it needs to be fixed

Install 2 side gates on a residential property, 5-7 metres . Materials provided

payment of 55 dollars hourly Paid in c💸sh Job: Help Set Fence Posts for PVC Gate & Timber Fencing – Helensvale* Hi, I need assistance setting: - 2 posts for a PVC swing gate panel steel post with PVC goes into concrete - 9 additional posts - Plus placing a few steel spigots to bolt timber posts for fencing. I’ll be working alongside you. I have a battery-powered post hole digger, but if you have a manual one, that will help as well. I’ve also got a concrete mixing drill bit – we’ll mix in buckets and pour using a wheelbarrow. Post holes are 600mm deep. I only have a 600mm level, so if you have a 1m level, even better. All materials are on-site.

The installation of my fence gate is ready. Next Wednesday, I'll lay the concrete path, so I hope the gate can be installed in coordination with it. Since the gate is made of solid aluminum alloy and extremely heavy, it requires concrete foundation support. The exact installation schedule isn't finalized yet – I'll confirm the timing one night before next week.

Need to have current colourbond driveway gates moved from current location back about 10 metres

Put up a timber fence that matches the existing style. Approximately 35 metres and I have around 160 palings to be used. All other materials will need to be supplied and included. Parts of the old fence will need removing.

Replace the existing timber gate, which is in very bad condition, with a new Colorbond gate. Location: Backyard in Helensvale. Urgency: Next few days.

Glass fencing needing installed around pool