Find a fence installation professional in Windsor QLD

Looking for a handyman to install two gates all materials will be provided - both gates will need to be approximately 2m width *1.8m high. Some thing similar to attached but a little gate will be wider. I will also be able to assist.

Hello. We’d like to build a privacy screen across the pool filter as shown in photos. The screen will be made of treated pine (2.1m lengths) and to be at the same height as existing fence. Concreted posts in and palings on rails. Please include time and materials.

I'd like a gate built to connect to the opening of this gate.

Supply and install electric gate to match the fence. If there is enough room we would prefer a sliding gate, otherwise a swing gate.

Need supply install electric gate , fence and arbor

I would like to get my old fence removed, and replaced with an attractive high fence (1.8m) that provides reasonable sound reduction from the main road. Im interested in doing it in either block with expressed posts, hardwood sleepers, or a composite (eg modular wall). I have a ped gate, and need a swinging single driveway gate. The total span is 20m including say 3m for driveway gate and 1m for ped gate. There is an existing sturdy concrete wall that the fence can be mounted on, or mounted to the side of, where the pine fence is currently mounted.

I have 3 colonial wooden fence palings that need replacing on my front gate. I have the replacements but they will need to be shortened slightly so you will need to bring a saw and some galvanised nails. - Due date: Needs to be done on Saturday, 7 October 2023

Need a fence that is looking very old to be tidied up. I think the rails look okay. Fence needs a bit of straitening and all the pailings replaced. About 20m of fencing. - Due date: Before Friday, 15 July 2022

Supply and install timber side gates for house. Would like a lockable latches for both as well. Attached two photos referencing location for the gates. Ideally would be similar colour to the new fence seen in the photos. Flexible time frame

Hi there! Had to take down part of a fence to allow building trucks in the driveway. Now need it rebuilt. The photos show the original fence, and it’s current state - the metal and the wood is what needs replacing. Note one side still has the metal side piece installed that everything was screwed onto, the other side does not have this piece on there as it was rebuilt. The materials were all saved to be put back though except for new screws of course. Then one length of the wooden neighbour fence (can’t really see in photos but running down the driveway) also needs putting back, it’s in one piece so that should be easy.