Find a fence installation professional in Sorrento VIC

Erect 9m of brush fencing - prior fence is already removed. Also, an existing patch 4m of timber pailing fence requires fixing(reposting).

I have installed 6 rows of round treated pine posts for a small orchard. The rows are about 2 metres apart. Each row is about 12 metres long and has 2 end posts and a post in the middle. The posts rise about 1.8 metres above ground level. (The post were installed about 900mm below ground level and concreted.) The rows are on a small incline, with a rise of about 2 metres across the 12 metre length of the rows. I need to install wire along each row, to support fruit trees that will be espaliered along the wire. I want to have 3 lines of wire on each row, the first starting about 80 cm above ground level. I am looking for someone to install the wire. I can send images of the orchard / posts if need be.

I'll purchase the materials directly and the task is for the labour to plan the gate and materials, pickup the materials (I'll pay the supplier for them), build and install the gates. The gate gap is about 3.6m wide and the gate will be 1.2m high. There are existing square wooden posts on each end already which can be used. I require you to arrange the materials, however I'll pay for them directly from the supplier/s. I'd like a metal frame with wooden battens attached. The frame would be ideally black powder coated, otherwise stainless steel). I assume it needs three hortizonal tubing (top, middle, bottom) so the timber won’t twist. I think 3.6m is too long to hang a single gate, so most likely it will need to be two gates with a latch and drop rod. The battens should be Silvertop Ash or Spotted Gum battens reasonably close (e.g 32mm battens with 20mm gaps), running vertically. Please provide your airtasker quote for your labour, and what plan you have for the materials required (which I'll pay for - please tell me how much they will cost from your supplier/s) Thanks

70m in total, along two sides of property. I'd like it to be black pvc coated chainlink, with a mix of round treated pine posts at sensible intervals and black star pickets in-between. Three guide wires (no top of bottom rails). Access is mostly easy, however one 20m section is hindered a bit by trees (but can be worked around). No neighbour issues. Price should include materials and labour but please show the breakdown and what materials are proposed. Thanks.

The fence to be replaced is 1.9m treated pine and is 16.5m long

Side fence panel/panels falling down. Need to know if it can be fixed or needs replacing

Build fence to fill in 7m defect. Same style. No painting required - Due date: Needs to be done on Saturday, 9 September 2023

Old lattice fence removal to be replaced by 28 m fence. 40x40 mm steel posts at 1.2 m spacing, 90 mm wide merbau decking spaced 10 mm apart horizontally to a height of 1.8 m. To match an existing fence. - Due date: Flexible

15m rear paling fence needs replacing. Concrete posts are solid and prefer them to be reused. Would like 1.65m treated pine palings with plinth. - Due date: Flexible

replace old t/pine 18.5m x1.8h remove old fence clear run good access Hughes rd Sorrento - Due date: Flexible