Find a fence installation professional in Preston VIC

Front of the Garage is 5.5 meters and back side is 17 meters, so the total length is 22.5 meters.

I need a sleeper base board installed along side wood fence (approx 30m), a small retaining wall fixed / replaced and a section of garden edging installed including clean up and rubbish removed.

Remove and dispose of timber fence and replace with Colourbond fence. Approximately 31 metres long

Need bird netting to install in balcony, the one side size is 250 metre length and 185 m hight and other side 120 m length and 185 metre hight

You have to remove and dispose of the old fence and install a new one also arrange material by your self and apply for approval Material cypress (48.6m package) Post Rails Plinths Palings Any other if required

Please replace front side fence and remove and dispose old panels - approx 7m

There is a small fence between two units falling down, needs to be replaced with either timber or colorbond, all rubbish must be removed.

I need a temporary prop installed on the front of this garage in Preston . See diagram below. After completion, it will need to be signed of by an engineer. Need to be qualified and have insurance.

I require existing timber paling fence to be removed (and disposed) and new equivalent fence to be supplied and installed. Also, require fence to be painted on both sides. Total length approx. 32m

Hello (ignore $5 price) I am looking for someone to come and give me a quote for building a fence and sliding car gate between my property and a common driveway. Total total length is approx 7 meters including the gate. The fence/gate would ideally be approx 1.6 meters high. There is a small garden bed in the way that will need some concreting over for the posts.

Have swing gates need them joined and turned into automatic rolling gate

Replace existing fence Between two existing properties Obviously, the price will be split between the two property owners So will be looking around the $2000 mark to be split

Supply & install hinged pedestrian side gate. Can be timber or colorbond. Padbolt and cutout required. Interested bidders must do prior site inspection.

Hi, Need someone to repair or potentially replace damaged frame for exterior driveway gate. Existing damaged frame can possibly be bent back into shape and fixed to concrete using bolts. If this is possible. If this is not possible then replacement frame to be built using galvanised steel posts or similar for existing gates. 2x Gates to be re-hung after this is completed. Gates are quite heavy and tall, 1.8m and I am happy to assist in moving them before the other work takes place.

Require colour bond fence to be installed and remove old fence 2m high with sleepers base and steel post between, 41 meters in length

We have 14 metres of fence that is falling down, held up by ivy and spider webs. It's a diy job by the previous owner and needs replacing, probably with treated pine as the most affordable option.

Install gate lock into existing timber gate

Please quote for supply and install of 1950 mm high timber paling fence, Total 15.5 metres in length. Existing fence will be removed.

Hi I am looking to replace the two fences down the front side of my property. I want to extend the height to provide more privacy from the neighbours. Would like the fence to taper down and become shorter closer to the street line, they are 7 and 8 m long

We’d love someone to source recycled materials and build a fence for our front yard. The fence and gate is about 15m long. We would need someone to come out to consult with us then research recycled material and then build the fence and gate - Due date: Flexible