Find an experienced fence painter in WA

Require someone to spray paint fence a monument colour to align with the Colorbond colour. Roughly 10metres long

Oil both sides of a Jarrah timber fence. I’d like some advice on best type of oil to use to protect and enhance the look. The fence is 12.5m long. There is a section of hedge which will make about half of one side a little tricky to access.. but it’ll be fine.

Wanting to get my fence panels painted not the metal frames. May need a light sand and two coats of paint. I have already purchased the paint.

Hi, I need 2 X colour bond fences either painted or sprayed in monument. 26.4m - left boundary 14.08m - back boundary Thanks

Needing a handyman to complete these task. This is all for a 4x2 home located in Ellenbrook. 1. Touch up patching and painting to scuffs on walls throughout. Including some door frames. 2. Pressure cleaning to paving and front driveway. 3. Re-paint of eaves. 4. Re-secure wooden panels to fencing.

Approx 10m fence badly in need of sanding back and resealing

Repaint existing fibre cement fence. Dulux Paint supplied. Will also need to patch and sand a couple of hairline cracks. Bottom missing panels will be getting replaced before painting Need doing by asap before pool gets filled with water next week so easier to access.

Fence for a new property , block size 15mts x 30 mts

Brand new Light colored colourbond fence need painting to dark ‘Monument’ colour. Minimum two coats. Will also require primer first coat as it’s a brand new fence. Preference is for a high pressure wash and light sanding to be undertaken prior to primer applied New Fence will be 2m high and approx 20m long. Photos below are of current old fence. High grass and trampoline will be removed for new fence install and for painting.

I would like a white painted, wooden picket fence built around my front yard with a hinge door leading to the front door. Measurements will be provided on request and quote :)

Two fibre fences need to be spray painted monument black (or close as possible to colour)

Painting a colour bond fence charcoal grey

Painter and/or handyman to spray paint metal fence: 1. Remove panels and gate 2. Simple wash and dry (no primer needed) 3. Spray paint both sides using Dulux metal shield (paint and work area provided). Two coats required. 4. Reinstall panels and gate Details: 6 x 2.5m panels 1 x 1.1m panel 1 x gate as shown

I have a small courtyard fence out the back that needs asbestos primer and sealant coats on it and looking for a painter to be able to do so Note: The water is just from just washing my bricks

50m2 carport ceiling and eaves plus 16m of fence (5 mx 1.2 high and 11mx1. 8m high) at the front boundary. To be removed in the next couple of weeks

Paint colour bond fence using a supplied surf mist. High pressure clean fence. 1x coat of primer (supplied) 2x coats of surf mist matt (supplied) Total length 27m

Sand, clean prep timber features( Wooden fences, panels and bench, door) and apply two coats of long lasting protector oil

End of lease requirement - need the colour bond fences and garage roller door to be pressure hose washed “I just wanted to remind you that is a condition of your lease agreement that the exterior/fence of the property is to be water pressure cleaned at the end of the tenancy.”

I'm looking for quotes for painting a 21-metre COLORBOND fence the monument colour. I'll clean and prep before you start. Need to match new fence colour seen in the photo. Double coat require.