Find trusted local electricians in West Pennant Hills

Electrician: Change 9 power points / light switches to new ones (doing a house reno and want to remove old / yellow plastic). I have bought the new power points and switches (Clipsal and QCE). The specifics are, in various rooms around the house: - 3 power points - One quad gang light switch - Two triple gang light switches - Two double gang light switches - One single gang light switch

Two electrician tasks: 1. Install two points, at the location pictured and immediately behind it on the reverse side of the wall (bathroom). The wall is drywall on wooden studs. The space above is accessible roof cavity and there is a mains line running nearby to the wall above the install. I’ve got the power points themselves (Clipsal classic). 2. We have a fault in one protected lighting circuit, with the fuse box breaker flipping when a specific light switch is turned on. We’d like to find the exact source of the fault and what needs to be fixed to resolve it.

Fix ceiling light fixture. Plastic broke so light globe cannot attach

Fix cables / holders for two INGROUND UPLIGHTER

1) Source & install imbedded brick lights 2) Install Safety switches to switchboard

Looking for an electrician to reconnect an existing solar string to an older 3kW single-phase inverter. My AI assistant (Gemini) noted that this is a simple plug-and-play task I could technically do myself, but I prefer to have an electrician handle it to ensure everything is done safely and tested properly. Scope of Work: Plug the existing, disconnected DC solar string cables (MC4 connectors) back into the bottom of the mounted 3kW inverter. Turn on the corresponding PV Array DC Isolator switch. Turn on the Solar Main Switch / AC isolator at the switchboard. Stay for 2–3 minutes to ensure the inverter passes its internal safety countdown, syncs with the grid, and wakes up successfully. Verify via a quick visual check that the unit is actively generating power. The panels are already securely on the roof, and all cabling is already run right to the unit. This is purely a localised reconnection and startup verification job. Located in West Pennant Hills.

Licensed electrician required for multiple maintenance items: • Replace 2 ceiling fan speed controllers (controllers have collapsed into wall plate) • Diagnose and repair 1 Mercator ceiling fan remote control issue • Replace 2 power points • Replace 1 ceiling light fitting (like-for-like) • Diagnose outdoor fountain not operating. No sound from pump when switched on.

Rewire my HWS electrical supply from Off Peak power fuse switch to General Usage fuse box in my mains switch box for both my house and my neighbour's house (2 houses next to ech other)

Rewire my HWS electrical supply from Control Load fuse switch to General Usage fuse box in my mains switch box

Electrician needed to replace one LED batten ARLEC 40w light on the ceiling at West Pennant Hills

The garage has easily accessible manhole and the down lights are with plugs and will be replace with similar ones which I will provide.

Aircon unit outside making a banging noise when turned on

I need to replace 20 down lights, install 2 new down lights, replace 5 bedroom lights and 4 wall lights. Please give me an offer and the date you can do this job? Thank you!

There are three dc isolator switches for our 10.52 kW solar panels, that feed to the invertor. The switches have got burnt and need replacement. The job will include removing the existing burnt isolator switches, supply and install new ones, check the cables, check the switches mounted on the roof, check the panels, connect the switches to the invertor, check the connection to the grid and confirm that all operations are working properly. The photo of the dc isolator is also attached. There are three of these, all to be replaced. Two of the isolators are burnt.

electrician required to troubleshoot a faulty circuit at home. The circuit is 1 of 2 light circuits that feed lights to 1st floor. The circuit never tripped and still has a small current, possible loose negative connection. There has been no recent changes to the electrical wiring at home, the circuit stopped working out of no where. All the other circuits are still working fine, and the 2 light circuits have been wired to my solar circuit to run on battery backup in case if grid failure.

Hi,
I’m looking for a licensed NSW electrician to rewire my existing electric hot water system. Job details * Residential property with 3-phase power * Electric storage hot water system currently connected to Controlled Load 2 (CL2) * Disconnect from CL2 and reconnect to the main household meter / general supply * Install a dedicated hard-wired timer so the hot water system only heats between 12:00pm – 2:00pm daily * Hot water unit is a standard electric storage system (~3.6kW) Technical notes * Where possible, please allocate the hot water system to a separate or light-load phase to maintain good phase balance (EV charging, air-conditioning and kitchen loads are used during the day). Requirements * Correct circuit protection (MCB / RCD as required) * Proper switchboard labelling * Full system testing after installation * Compliance with AS/NZS 3000 (Wiring Rules) * Certificate of Compliance for Electrical Work (CCEW) must be provided upon completion, as required under NSW regulations Notes * Rewire + timer only (no new hot water system installation) * No solar PV * Easy access to both switchboard and hot water unit * Please advise if any electricity retailer or distributor notification is required after CL2 removal Please include in your offer * Confirmation you are a licensed NSW electrician * Estimated labour time * Whether the timer is included or supplied by me * Any additional parts or compliance considerations you foresee Thanks!

accidentally drilled a screw into a power cable inside a stud wall, which initially caused the circuit to trip. I have already cut open the drywall to locate the issue, so the damaged wire is fully exposed and ready for fix (see photos). power is currently back on after removing the screw, but we switched off now to fix the wire insulation. We need electrician to repair the damaged section (likely with a junction box ) and safety test the circuit. Thanks

3 old outdoor lights to be replaced with new ones bought from Bunnings.

Repair RC fan in bedroom and change light in upstairs bathroom, Install Exhaust Fan+Heat+Light in another upstairs bathroom

Need to install 3x small split system AC to a single storey weatherboard house. Need to run a separate electrical wiring to the meter box but if you can't do it, I can organise an electrician for that. Installation only, I will supply the 3x brand new in-box split systems. (Or please let me know your price for supplying 3x units.) Job is expected in December. Please indicate price with inclusions, thank you!