Find trusted local electricians in Rouse Hill

I need a licensed electrician asap to fix a switch/wiring as well as a couple small jobs. 1. One switch point in the 2nd bedroom has some issues. Everytime something is plugged into it, it fuses after some time and the mcb goes down. This needs to be checked immediately and fixed asap. 2. There is a switch in the bathroom that has gone inside, this will need to be fixed/replaced. 3. The switch where the dishwasher connects is a bit loose so will be best if that can be fixed/replaced. Thanks

I need an electrician to install a new power point behind my couch so I can connect/power my couch There is an existing power point on the wall nearby, with a light switch above it. I would like the new power point installed behind the couch, using the existing electrical supply where appropriate. I already have the power point/outlet, but I’m missing the two small screws needed to secure it to the wall. Please provide a quote for the installation, including any required wiring, fittings and labour. Preferably today or tomorrow Monday

a) connect outdoor lights through to the point in garage or have a outdoir point. b) outdoor power point on the other side of the house.should not be long cable run as I have a point on the inside at the same spot. .based in Rouse hill.Let me know the price Vijay

Scope of Work: Wall Switches: Replace 8 existing standard wall light switches with user-supplied Aqara smart switches. Video Doorbell: Install and mount 1 smart doorbell. Requirements: Must be a Licensed Electrician registered in NSW to handle 240V wiring safely and legally.

Looking for a licensed electrician to install a pre-purchased single-phase 7kW dé EV Wallbox on my internal garage wall and to provide a CCEW. ​This is a direct back-to-back installation—the charger will be mounted on the internal brick garage wall directly behind the exterior main meter box. Because it is a short cable run (~1 hour job), my timing is completely flexible whenever you are working in the local area.

Need qualified electrician to install my BYD charger to my 3 phase system in the garage I have the product so just need the service The switchboard is located just the opposite side of the wall where the charger will go Located in rouse hill

I need a licensed electrician to install 1 x power point socket in this area. Please refer to photos.

I have three phase switchboard. Need to install tesla wall connector on same side of garage wall as switchboard. I would need 32/40a rcbo, isolator switch and installation. Thanks

Hi, I’m looking for a licensed electrician to complete the following work at my house: 1. Install two weatherproof outdoor power sockets (GPOs): * One at the front of the house * One at the back of the house 2. Repair or replace the existing outdoor light fitting/holder. * The current light holder appears to be damaged/loose (see attached photos). * If the existing fitting cannot be repaired, please let me know if it needs to be replaced. Please include in your offer: * Whether your quote includes labour only or labour + materials. * Whether you are a licensed electrician. * Your earliest availability. Note: picture added for existing outdoor light folder which needs to be replaced

Hi there, Looking for a fully licensed NSW electrician to install 3 matching pendant lights over our kitchen island. Work must be compliant and certified for our property sale. ✅ What we provide: • 3x Marcel 250mm Smoke Glass / Black Pendants (all fixtures, cords, bulbs supplied) • Power is already available at the ceiling above the island — no new wall/ceiling wiring runs needed, just connect and mount ✅ Work required: • Remove existing 3 temporary spotlights • Space and hang the 3 pendants evenly over the kitchen island • Connect safely to existing circuit, test all lights fully • Leave work neat, provide electrical safety compliance certificate for our records 📍 Location: Rouse Hill, NSW 2155 💰 Quote: Please provide total labour cost — no hidden fees. 📌 Must have: Current NSW Electrical Licence + public liability insurance — please show licence on arrival. Thank you! 😊

I'll be supplying the Tesla Wall Connector. Property Details: New house (built 2021) Single residential home Existing modern switchboard (no known issues) Switchboard and garage are on opposite sides of the house Cabling will need to run through/around the property — roof cavity or external conduit may be required Job Scope: Install Tesla Wall Connector (Gen 3) Mount charger on garage wall Run cabling from switchboard to garage (opposite sides of house) Confirm best cable route on site (roof cavity / external conduit / underground) Check load capacity (no major upgrades expected, but please confirm) Provide NSW Certificate of Compliance Requirements: NSW licensed electrician (mandatory) Experience with EV chargers / Tesla installations preferred Must comply with AS/NZS electrical standards Provide insurance details if requested Timing: Flexible, preferably within the next few days Please include in your quote: Licence number EV charger installation experience Proposed cable route Total fixed price (preferred) Availability

I have two tv’s (one 65” already mounted that will need to be moved / the other 85” with motion mount) that need to be mounted to the wall. One area an electrical outlet will need to be added / moved to allow power socket to tv. install Sanus enclosure to accommodate Foxtel iq and one connect box for 85” tv.

Looking for an Electrician to install a power PowerPoint behind tv and instal the tv brackets to the wall to hang tv up. Wall is Gyprock, tv is 85inch! Brackets hold 90inch max.

I have 2 working downlights I want replaced with 2 smart downlights which I have. Can be reached with short step ladder.

Replace lightbulbs in 10 down lights I don’t have the lightbulbs so can pay more to cover this cost

Wanting to get this pendant light changed into three down lights. I will be replacing with another pendant (screenshot pictured) that is adaptable to down light fitting.

Looking for free quotes for Installation of 2x camera Eufy flood light and camera 360. I have downlights on premise already installed require someone to install cameras. adjacent to it. Looking to also have an ethernet cable installed from the study to the internet telstra box, wiring already in place just need to piggyback off it.

Need an electrician to remove Tesla Gen 3 wall connector. Photo provided.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Rouse Hill Town Centre, to replace five faulty track light fittings. The Issue: Five of our ceiling-mounted track spotlights have stopped working, which is affecting the lighting on our sales floor. As these are integrated LED units, the entire fitting needs to be replaced. The Job: The task is to supply and install new, like-for-like replacements for the five faulty lights. The scope of work includes: 1. Safely accessing the light fittings on the high ceiling track (a suitable ladder is required). 2. Removing the five faulty light fittings. 3. Supplying and installing five new, identical replacement track lights. 4. Testing the new lights to confirm they are fully operational. ** Light Specification (see attached photo) Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an A-frame ladder appropriate for a high commercial ceiling. - The contractor must be able to source and supply the five specific light fittings as per the code provided. Location & Timing: Location: Rouse Hill Town Centre, Cnr Windsor Road and White Hart Drive, ROUSE HILL NSW 2155. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer must include all labour costs AND the cost of supplying the five specified track light fittings. Thank you.

Need 6 power points 4 tv points and 3 ceiling fans