Find trusted local electricians in Campbelltown NSW

I have a Westinghouse electric freestanding cooker with four burners. Two burners gradually developed a fault where they heat up to maximum temperature regardless of the heat setting. The same issue has now started occurring with the grill below, where the heating element reaches maximum heat as soon as it is switched on. I’m looking for a qualified electrician to inspect the cooker, diagnose the cause and advise on the most cost-effective solution. I would like quotes for two options: Option 1 – Inspection and Repair - Diagnose and repair the faulty burners and grill. - Check the remaining burners and the overall electrical operation of the cooker. - Ensure the underlying issue is properly resolved to minimise the risk of the same problem recurring. Option 2 – Cooker Replacement - Provide a quote for installing a similar replacement electric freestanding cooker. (Excluding oven price) - Include disconnection and removal of the existing cooker, installation of the new unit, and disposal of the old appliance. - Advise whether replacing the entire cooker would be more economical than repairing it. Please provide separate estimates for both options, including labour and any applicable additional costs. Happy to consider your professional recommendation on which option would be more cost-effective. Thank you!

Licensed Electrician Needed for Downlight Installation Throughout House Budget: Approx. $60 per downlight supplied and installed. Final total depending on number required and site inspection. Hi, I’m looking for a licensed electrician to install LED downlights throughout my house in Campbelltown NSW. The house includes bedrooms, living areas, dining room, kitchen, hallways, laundry and bathrooms. I’m looking to have approximately 35–40 downlights installed, but I’m happy for the electrician to recommend the appropriate number and spacing after inspecting the property. I’m aiming for around $60 per downlight supplied and installed, preferably including: * Supply of good-quality LED downlights * Installation and wiring * Cutting ceiling holes * Removal of existing hanging light fittings where required * Removal of some existing ceiling fans where required * Installation of downlights in bathrooms and laundry using suitable fittings * Testing of all electrical work * NSW electrical compliance certificate I want a clean, modern finish with evenly spaced downlights throughout the house. Please provide your price per downlight and advise whether that includes both the light fitting and installation. Must be a licensed and insured electrician. Will pay CASH! Location: Campbelltown NSW.

I am looking for roofer for solar panel installation

Hi I have a fox EV charger Need to install closer to meter box 3 phase connection Area Campbelltown Thanks

Light box required to be installed on existing shopfront signage.

Electrician needed to replace 5x ceiling lights and replace with LED lights. current lights are circle oyster light which needs to be replaced with LED oyster style 30 and 40cm lights. New lights fitting will be provided. Property is currently empty. Electrician must have own ladder and tools. Also, vaccume the carpet (if needed) and dispose old fittings after work.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Macarthur Square, to replace three faulty ceiling downlights. The Issue: Three of the recessed LED downlights on our main sales floor have gone out, creating dark spots in the store and affecting the overall presentation. As these are integrated LED units, the entire fitting needs to be replaced. The Job: The task is to supply and install new replacements for all three faulty lights. The scope of work includes: 1. Safely accessing the light fittings in the high ceiling (approx. 3.5 meters). 2. Removing the three old downlight fittings. 3. Supplying and installing three new, suitable replacement LED downlights and/or drivers. 4. Ensuring the new lights' colour temperature and brightness match the other existing lights. 5. Testing the new lights to confirm they are fully operational. Light Specification (for sourcing a match): See attached spec sheet. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an A-frame ladder or platform appropriate for a 3.5-meter ceiling height. - Experience with commercial lighting, particularly recessed LEDs, is essential. - The contractor must be able to supply the three replacement downlight fittings. Location & Timing: Location: Macarthur Square, 200 Gilchrist Dr, Campbelltown NSW 2560 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying three new LED downlight fittings. Thank you.

Need split system aircon installation as soon as possible - ideally on Saturday. Westinghouse 2.7kw.

Hi mate, require new wire installation for wall heated towel rack & two wire for two lead mirror. See bathroom images.

Downlights installation. 10 down lights (I already have the lights) Groundfloor unit. Will need wiring and drilling holes for 5 lights.Total of 10 to be installed.

I need 10 power point covers replaced I will provide the covers all I need is to quote for labour

Need to setup NBN connection port to a Granny flat Main house has an NBN box Need to make the physical connection to granny flat, make to socket in the wall

We need a licensed electrician to attend ASAP to inspect and fix an electrical issue. Three breakers have tripped (workshop lights, toilet, and office area), and the lights in those sections are out. The switchboard is clearly labelled, and we have photos of the affected section available. Availability: Ideally today. Thanks – looking forward to your response

1. Supply and install 2 Quad power points, replacing 2 existing double power points. 2. Please use Hpm or Clipsal brands.

Pendant light and strip lights installation in a new house. We bought all the lights.

Generator was working now it's not. Doesn't start with key

Fix interior lights outside. Remove old and add new

Hi Fellow Taskers I'm looking for a qualified/licensed electrician to complete some small electrical works. The following jobs have also got photos attached. Supply and install 2x new power point in laundry area (likely) via conduit running on exterior. Find multiple photos interior and exterior for reference. Install/replace exisiting power point with customer provided board. Replace/repair existing point in wall. This power point is not sitting on a support. Please send offers acknowledging the works as provided in above scope.

I need two completely nee power points placed in my laundry a 2 power points replaced in the kitchen.

Change the battery in a smoke alarm