Find an experienced driveway repair contractor near you

Install a new gate on the driveway and remove the existing gate piece and discard it. The gate measurement would be 3.8 meters width.

Need to move a 2x2m water feature about 35m from driveway to backyard. The water feature is heavy and will need 2+ people to move. Will be easier if you have a dolly with large wheels to get it across the first 15m which is loose dirt. The back half of the distance is paved/decked area so much easier to use a dolly.

I'm looking for an experienced handyman or concreter to repair and reinstate a small section of a concrete driveway at a townhouse complex in Box Hill North VIC 3129. Background: We have arranged for a licensed plumber to repair an underground water pipe leak on Friday, 23 October 2026. The plumber will cut and remove the existing concrete to access and repair the pipe. Once the plumbing work is completed, we need someone to reinstate the affected section of the driveway. Job details: 1.Location: Box Hill North VIC 3129 2.Approximate repair area: 1m × 1.m (1.0m²) 3. Existing surface: Concrete shared driveway 4. Required work: Reinstate the excavated section with suitable concrete, including any necessary ground preparation, compaction and finishing. 5. Ensure the repaired section matches the existing driveway's level, slope and finish as closely as possible 6. The repaired surface must be suitable for normal vehicle traffic Timing: The plumbing repair is scheduled for Friday, 23 October. Concrete reinstatement can take place once the plumbing work is completed and the area is ready. Please include in your quote: 1. Labour and all required concrete materials 2. Ground preparation, backfilling/compaction and reinforcement if required 3. Concrete pouring and surface finishing 4. Site clean-up and any waste disposal

Approx 90m2 to do Pressure wash and clean driveway And colour seal after

Hi, We need the following trees pruned in the drive way 4 x Olive trees 1 x Orange 1 x medium sized hedge 1 x cherry blossom 1 x Bougainvillea

Description: I need an experienced handyman, metal fabricator, or drainage specialist to inspect and repair the metal drainage grate installed across my driveway. The grate appears to be bent and uneven in some sections, and I would like it inspected to ensure it is properly secured, level, and safe for vehicles and pedestrians.

The driveway painting has faded and needs to be refreshed.

Drive way and house entry clean and paint.

We have a double car gate which sits on an aluminium runner the wheel is scrapping and needs replacing gate is sticking

Need help to move 1.5 tons of pebbles from driveway to backyard using wheelbarrow and buckets (provided). Pebbles need to be loaded to buckets, and buckets can be put in wheelbarrow Travel path: 25 m by wheelbarrow , then 20 m by buckets (including 5 steps down)

We’ve got electric swinging driveway gates (Centsys brand). They’ve stopped working. Had a sparky out and he said it’s likely the gate motor as there’s no issues with power to it. Happy to fix or replace and not fussed on branding, as long as it works.

Remove cracked driveway slab and replace with rebar and fresh concrete

Approx 3.5m high Will need a plasterers lift of some sort. Cut to size and ready to go. Please quote.

Hi, I need to fix my driveway gate and if possible repaint as well. It has wooden bars but screwed to metal horizontal bars. Few of the bars are broken Attached the picture.

Approx 5 tiles in driveway need to be regrouted. Letterbox some bricks falling away need to be recemented and letterbox slot needs to be replaced. I also need a canvas painting hung. Its not very heavy approx 48 x 140cm.

I want to install these solar powered cats eyes. One went in easy (new cement) I tried to install it into the more established cement driveway and I only get like 20mm down before it just stops. I need better equipment. Can someone help me out?

Repair two broken slate tiles on a short driveway and match existing finish

I need to re tile some terracotta tiles in my drive way. It’s just a patch right now

We need a small reinforced concrete slab constructed beside our driveway, against the house/boundary fence. The finished slab needs to be approximately 1100mm × 450mm × 100mm thick and completely level/flat, as it will be used as a base for gas bottles. Work required: * Saw-cut and remove a small section of the existing concrete driveway to create sufficient space for the slab. * Existing driveway is approximately 100mm thick. * Approximate saw cuts required: * 1100mm long * 120mm long * Remove and dispose of all cut concrete/rubble. * Excavate/prepare the area as required and provide a suitable compacted base. * Form up the slab. The house/boundary side can form two edges of the area, with formwork required to the remaining exposed edges as appropriate. * Install steel mesh reinforcement, adequately supported within the slab. * Pour a 1100mm × 450mm × 100mm reinforced concrete slab. * Slab must be perfectly level, despite the adjoining driveway being on a fairly steep gradient. * The new slab must not follow the slope of the driveway or simply be poured onto/joined to the sloping driveway. * Neat finished edges and surface. * Remove all waste and leave the area tidy. Access is straightforward from the driveway. I’ve attached photos showing the location and the section of driveway that needs to be cut. Please quote including labour, concrete, reinforcing mesh, formwork/base materials, concrete saw cutting and removal/disposal of the old concrete. Please also let me know if you have experience with small reinforced concrete slabs and whether you have your own concrete saw/equipment.