Find a local console repairer in NSW

Paint props as pictured to a very fine finish with fine roller or spray. Up to the painter which method used. Any marks left by a roller after the paint has dried will have to be corrected by the painter at no further cost to me. VERY important - Paint needs to be laid off to perfect finish. No stroke marks at all. I will provide aqua enamel semi gloss. Need job done in one day inside my home with other furniture around. The props have one coat of zinsser and will need to be lightly sanded first.

Bolt the kerb ramp into the concrete. I have the bolts. I need it done asap please

Replace medium glass pane on2nd story, needs ladder AND repair some brick steps by recementing a few bricks

I have a couple of roof tiles that need replacing, there is a small gap that needs to be sealed from the outside elements and I need the top of the pillars re housed please. Also removal of a birds nest in this gap

Kmart atlas draws, I missed a few screws, the draws are closing and collapsing or falling together. They are also a bit uneven

Need a handrail installed for front porch steps. There are 4 steps. One side is reasonable but would be good if both sides of the steps can be done. Railings will be self purchased closer to the agreed date.

Hello, I need 2 men to open a wooden box, take the marble coffee table that is 90cm dynameter upstairs into my room. Downstairs bathroom needs a small mirror hanged up must make sure drill into wood not hollow wall. Would love it done asap. Will take 20 mins MAX!

Need someone to install taps - three (3) pairs of handles in the same bathroom) and one new (1) faucet in the sink only.

Installation of heat lamps. This is for just one.

I bought new Modella Wall Top taps and would like to get them installed in my shower.

Check all leaking taps and fix them (at the moment there 3 taps (hot + cold)

Newly installed carpet was not cut for the wardrobe door track. Now it’s cut, tack strips need installing to keep the carpet stretched. The strips are for concrete floors which I have. The wardrobe doors and tracks will be removed prior to your arrival so you just need to secure the tack strips to the concrete and pull the carpet onto them. Need someone with carpet installation experience who knows what they’re doing. Cheers!

Installation of Philips water filter to replace existing filter. Must be certified plumber and know how to install properly to avoid warranty issues.

Our garage lighting is staying on and not turning off. We have a Clipsal 2-wire motion sensor installed, which I believe has failed. Looking for someone with electrical experience to diagnose the problem and replace the motion sensor if required (I can supply a new one or you can supply). Details: Task: Troubleshoot & repair garage lighting Existing setup: Clipsal 2-wire motion sensor Location: Artaron Date: Flexible, but sooner the better Must be a licensed electrician

Replace laundry taps. We have a leak. We have already purchased the replacements.

hey closed off previous posting but could use a helper if available tomorrow morning around 9-11ish at bellevue hill. probably half a day and we can work out a rate if you want to stay around with other things if needed. pretty much I need someone who has painting experience to help with a master bedroom ceiling in dulux ceiling white, ideally if you can cut in tidily it would be great as ceiling doesnt have cornices so its not the easiest.

Apply silicone/sealant to my kitchen counter tops, the old one has worn out. I don’t know the exact length but I included a measurement of the entire kitchen to give idea. Please ensure that offers made are inclusive of airtakser fees, materials, and travel.

We are looking for someone with specific skills. We have an Epson Surecolor P5360 Colour Printer. We also have some digital files that we need borderless printing Our goal by the end of the job is to have a template set up in Photoshop in the following size formats 1. A5 print on roll paper (multiple prints) 2. A4 print on A4 paper (borderless) 3. A3 Print on A3 paper (borderless) 4. A2 print on roll paper Right now we do not have the skills to be able to get the borderless printing complete. Your assistance is to come to our office, set the templates up, ensure the printer is printing borderless so we can frame the work. You are working with images that are created in 2:3 format so there needs to be some cutting off the images in the Photoshop template. Once complete the goal is we will have a working template in Photoshop and printer settings ready to Drag and drop images into.

Need roughly 7 tree stumps cut to ground level.

Fixing Shower taps leaks & replacing bath tub spout with diverter and shower kit