Book a professional espresso machine repair service in Melbourne

Need someone to fix a coffee machine pressure, the coffee come out is watery and pressure not enough. One time fix task.

Service and clean Breville Barista Express. Machine is about 7 years old. Still works with no critical issue but isn't pulling espresso like it used to. Almost definitely needs shower head seal replaced - please bring a spare part and include in your quote.

My coffee machine keeps leaking water .

Clean and calibrate my coffee machine. I am struggling getting a good draw from the machine at the moment.

Delonghi la specialista espresso machine isn’t working properly. Amount of coffee grinding doesn’t appear normal, coffee isn’t pulling properly and coffee puck is very wet and soggy (this was never the case before). Unsure exactly what the issue is.

bambino plus (new 2021) powers on normally - 1-cup/2-cup/steam ights flash briefly, then both temperature bar lights begin to flash. The water tank is full and in place correctly and the water magnet works. the pump does not run at all and no water or steam comes out. I have tried power cycling and priming with no luck. The flashing buttons are non-responsive to being pressed and so cannot run descaling/ cleaning to see if that helps.

Lelit coffee machine is leaking around portafulter/group head.

My bean to cup SMEG coffee machine has the internal mechanism tilted forward. Need a mechanic (or someone who has encountered this before) to please come fix it!

Service and fine tune coffee machine

Breville Barista Pro. Currently stopping at 3 seconds everytime I try pull or even run water. Tried descale and cleaning but stops at 3 seconds as-well. I believe the hose is blocked with water but just don't have the tools at home to check myself.

I need someone with solid barista experience to come to my place and help me figure out proper extraction on my espresso machine. I’m struggling to get the grind size and shot timing right — either it’s too fast or too bitter. Looking for someone who can: • Assess my grinder and machine setup • Show me how to dial in grind size properly • Help me get consistent espresso shots • Explain what to look for in good extraction Should only take about 1–2 hours. I’ll provide all beans and equipment.

Hello, We have a Gaggia classic pro that requires a service, the machine is producing steam but no water is coming through the group head. It is approx 3 years old.

Urgent leak at brass T or PEX press connection. Pipe details 16mm, AS417:8, AS2537, adapter DN16 x 2.2 CL2/10bar. This is the first pipe from the Zip unit and supplies the whole shop. Photo and short video attached. Details Inspect and locate exact source of leak Repair or replace leaking fitting and any damaged PEX or adapter DN16 x 2.2 CL2/10bar Isolate and test supply then confirm no leaks and clean up water Provide written quote and warranty on work and parts Location City store

Our breville coffee machine is not working properly and when turned on water does not flow through the group head or steamer

I require my Lelit domestic coffee machine serviced. It is 6 months old and in need of a service due to the espresso brew starting to water down in one shot. I would also like to reset the dosage of the automatic weight grinder.

Safety switch keeps flicking off. Supplies dishwasher and coffee machine

I need a plumber to do two jobs. My tap (as shown in images) came out and needs to be put back in - unsure if I will need to completely replace the tap but hopefully you can judge from photos. I also have a plumbed in coffee machine that I need to remove too. Please message if you need extra details!

La Marzocco 2 group, Serie F870, Model 2AV Details from last service: Brew element has major scale breach, pump is seized, fan not running and solenoid exhaust manifold has some scale build up too. Did basic service while on site and replaced seals/shims/showers, replaced vacvalve o-ring, cleaned level probe, rebuilt RH steam tap, replaced filter, all other functions working otherwise. Checked/cleaned Robur, burrs starting to feel dull so may be worth replacing when go back to sort out other issues.

Rancilio semi professional machine located on counter top adjacent to sink. Need benchtop to be drilled to enable water and waste tubes to be fed through to water and waste supply. Needs pressure adapter fitted to water supply hose (supplied) and extension of existing waste hose (supplied). Should take about 1.5 hours max. Must have experience with plumbing

Our kitchen sink has started to smell. We’ve tried Draino but it hasn’t fixed the problem. There’s also an old water filter attached (might be part of the issue) and a coffee machine that needs to be disconnected from the water supply.