Find a cladding professional near you

Supply and install indoor cladding panel under kitchen benchtop. One side only. Approx measurement: 88cm height 150cm width

Looking for someone to do tv wall cladding and panels

Looking for someone who can install Wpc cladding panels on the outdoor walls ( frontage )

We need a piece of roof sheeting replaced that is being used as external cladding. The hole is currently being filled by a piece of weathered ply. The fix is 2.5 storys high so a substantial ladder would be needed. Roof sheeting and materials provided

Supply and Install Open to crazy stone, stone cladding, stacked stone, Wall Details: Length: 9.5m Height: 200mm to 600mm (average 400mm) Total area: approximately 3.9m² Existing wall consists of concrete sleepers with a 200mm grey block extension above Blockwork is fully secured with chemical anchors and core-filled with concrete Scope: Prepare wall surface as required Supply and install stone cladding/crazy stone finish,

Hi, I'd like to get WPC batten cladding installed on the front porch fascia. Could you please quote for supply and install, with material and labour shown separately? The $100 I mentioned was only meant as an initial deposit, not my budget, so please quote the actual full amount. Alternatively, I'm happy to buy the materials myself if you let me know the quantities needed. In that case, could you also quote for labour only? Thanks!

G'day! We're looking for an experienced, tidy professional handyman/carpenter to install internal cladding inside our trailer. (Labour only) the material will be purchased! ✅ Project Details: - Trailer size: 7.6m long × 2.5m high - Material: lightweight mini wave corrugated iron, the sheets of light iron is 650wide so each wall will need 12 sheets there is very little cutting out. - Work to be done: Internal cladding installation - Quality: Must be neat, tidy and professional workmanship If you're interested, please send through a message with your availability and a quote! 👇 This will take place in Carbrook  

Outside cladding on 2 walls

Areas of external cladding (blue board) needs to be removed for an engineer's inspection of the frames & footings. About 6 -8 inspection holes are required. The material does not need to be salvaged. Also a floor inspection hole needs to be opened - material does not need to be salvaged.

Recently moved in to new house and discovered that the reverse side of the rear wall has not been clad. The Hardieplank is on site, but will need to be installed, sealed and painted please.

Have 3x wood cladding sheets, that need to be cut to fit horizontally across a wall. One board needs to be cut into an arch shape. Have pictures to provide more of an idea Price negotiable

I have a long piece of light weight cladding that needs re installing The piece is long and an extra set of hands is needed No tools required You will be needed for 2-3 hours

Going provide cladding need it installed,

Strip timber sheet wall and ceiling cladding including skirting and architraves in the upstairs room approx 8.4 x4.8m room. Take debris downstairs and leave in pile to be disposed of. Additional labour work available at same property.

Looking for someone to help with caulking in a factory ,

External wall Eastern elevation cladding wall to be repainted 20m x 8m total area

Experinced carpenter for the supply and Installation of external timber cladding to the small wall areas as shown in photos. Works include site measure, preparation of existing surfaces, supply and installation of timber cladding,wall wrap and trims, sealing/weatherproofing of all joints and gaps, and finishing to match existing surrounds. Cladding material is circa 30 linear meter, example profile provided.

My husband is doing it himself so I'm trying to get extra hands to go faster. Putting cladding stones like photos on the outside wall.

Hey guys, looking for a solid chippy or experienced tradesperson to help me out with a new house extension. ​The timber frame is brand new and straight, and the sarking is already up. It's a straightforward site with easy, flat ground access all around. ​The Job: ​Install eaves around the perimeter. ​Install timber battens over the sarking, including fixing the cavity closures at the base of the wall. ​Install Weathertex Weathergroove cladding over the battens. This includes fitting the required Weathertex aluminium external/internal corners and off-stud vertical joiners. ​Measurements: Total cladding area is 42 square metres across 3 walls: ​Wall 1: 3m L x 3m H ​Wall 2: 3m L x 3m H ​Wall 3: 8m L x 3m H ​What's sorted: I am supplying all the materials (eave sheets, aluminium joiners, cavity closures, battens, cladding, and fixings) and they are sitting on site ready to go. When you put in a quote, just confirm you have worked with the Weathertex cavity system before and know how to handle their specific joining methods and clearances. Please provide a quote for the labor.

Needing exterior wall (area with timber studs) to be filled with insulation and then cladded over to keep the house protected from the elements. We will provide earthwool and foil insulation. Cladding will need to be purchased by tasker which we will reimbursed.