Find experienced local carpenters in Rowville

Need to reduce the overhead cabinet size above fridge space to accommodate bigger fridge. Once resized, overhead shelf door is no longer necessary.

Job Overview Total Area: ~32 sqm Height: ~5.2m (High access/ladder work required) Materials: All Cutek stripping, cleaning, and staining products will be supplied and paid for separately. Contractor Requirement: Must supply and use a decent, high-powered pressure washer, ladder, brushes, rollers etc Scope of Work Strip Old Coating (Cutek Stripper) Apply Cutek stripping product to remove the remaining stubborn areas of the old film-forming coating. The timber is mostly sanded, but all leftover old coating must come off completely so the new oil can properly penetrate the timber. Restore & Clean (Cutek Cleaner) Apply Cutek cleaning/restoring product to deep-clean the wood grain and prepare the surface. Thorough pressure washing is required during this step. Stain & Seal (Cutek Wood Oil) Apply the Cutek oil/stain product evenly across the entire 32 sqm area, including the upper sections up to 5.2m high

Squeaking noise upstairs

I have a Walkin robe and cupboards but need some one to measure and install wooden boards for shelves

Hi Guys, we're looking for a full time all-rounder tradie to add to our team Immediately! We run a property services business doing a mixture of small residential renos, maintenance and commercial repairs. Looking for someone full time, Various tasks we get often: -renovations -doors and handles -patch and paint -simple carpentry -reactive callouts -commercial property repairs

Looking for a carpenter to help shorten some kitchen cabinet doors. The cabinet has already been shortened, but we don't know how to do the doors.

Looking for a skilled cabinet maker, carpenter, or handyman to build and install a custom floor-to-ceiling storage cabinet/pantry in my apartment, based on the attached sketch. The cabinet will be positioned around an existing structural column/wall and should maximise storage while maintaining a clean, modern look. Please provide your offer.

Can someone make a glass display cabinet with 2 selves in recess Recess is 1610mm

Need to have this timber removed today, it’s old sleepers and off cuts from new pergola

I need 2 niches in a bathroom framed Quick job Roughly 600 x 300

Stain our deck in the backyard and enterance

Laser cut wood veneer + laser etch labels into same panel for DC switch panel approx 230x400mm

Repair a leak coming through a timber windows frame and repair some other timber window frames.

Door frame is moving out due building fault.

Installation of a 30kg IKEA cabinet above head height, unsure if where I'd like to to be is where the stud is, so you'll be required to provide both regular screws or expandable screws incase. Bracket is provided although it'll need to be cut to size please.

Looking for a carpenter to do some framing work with internal framing timbers for a fire place insert (half wall). 90mm timber already at site. Estimating around 2-3 hours of work. Paying $50/ hour , minimum 4 hours paid. Rough sketch attached but not the exact dimensions, which will be provided. Happy to give a hand for anything you need.

I have a built in wardrobe with sliding door and it has a few shelves on the left hand side and hanging space for the rest. I want to add additional shelves and maybe draws to optimise space and I do not need hanging space. the dimensions are as follows : depth available : 40cm width: 170 cm height : 160cm The existing shelves on the left are 35cm wide and 160 cm high and it has adjustable 5 shelves with pinholes. The top of the entire wardrobe length has a 160x40 board I want to add 2 additional columns of storage. one needs to be 60cm wide so a unit like this can be put in : https://www.bunnings.com.au/lugna-white-4-drawer-2-shelf-insert-kit-to-suit-600-x-380mm-cabinet-shell_p0666975 Supplies you need 160x40cm melamine boards - 3 or 4 ~70x40 cm melamine boards - 5 if you can work out putting in draws for cheaper than the unit feel free to quote. The price I am putting includes the following : 160x40cm melamine boards - 3 or 4 ~70x40 cm melamine boards - 5 any other additional screws, wall mounts, pins,glue etc for putting it all together and finishing it. Labour

Build drawers and cabinets for a walk-in robe. I have tried to draw a quick sketch to illustrate. Was hoping to have some cabinet doors to cover the clothes hanging section and the shelf at the top. The drawing illustrates the design on the right as you enter the robe and replicated as a single 3 drawer, hanging rod and shelf against the wall where it is currently all shelving. Photo of existing space provided. If the blanked off section on the back right is a void, I would consider knocking that out to create more space.

Cabinet above fridge needs to be raised about 10mm. Looks like it can be down quiet easily.

I am looking for a cabinet maker/joiner to design and build a storage and utility setup for my car wash premises. Currently, I have chemical containers, a washing machine, and other equipment that need to be properly organised. I’d like a professional, secure, and space-efficient solution.