Find skilled builders in Melbourne

I’m flexible with the date. Remove the shed Remove the rear fence and gate, however keep aside the metal sheeting as it will be reused Remove the pavers Remove the bricks, however need to keep enough aside to cover for 14m2 Remove the small tree on right in photo, the other tree already gone. Include tipping in the estimate.

Demolish two interior brick walls approximately 2.7 in height and 1.5m in width (two walls in photo) Job is in first floor Laneway access at rear of building and large stairwell access Removal debris from site

Hi James I am looking to purchase a Stratco HH3 shed (3.25m x 3.40m). I am looking for a quote to have it installed. The site is on a bit of a slope so not sure if earthworks are required. I will also need a slab installed (slab will be bigger than shed for surrounds). Are you able to recommend any tradies for slab and earthworks if required? Proposed shed site photo attached. I am not sure of cost so have put in $1000 but happy for you to quote as required. No rush but have not yet ordered shed yet. Happy to discuss and would welcome any advice/suggestions. Thanks Michael Answerth

i'll need to send you the pdf drawings for you to suss out. basically it's a steel frame with alucobond cladding and a big roller door. probably a two man job but if you know what you're doing it should be fine. I have the full install manuals etc. laneway access on a corner lot. Im happy to pay for the quote

We are removing small dead trees, timber edging and gardens and a sign and fence at a school in preparation of new work. Need an extra pair of hands for the day.

Demolition required for a renovation job (1 bed 1 bath apartment, level 1): 1. Bathroom demo - toilet, bathtub, shower screens, vanity, laundry trough, and (partial) tiles 2. Kitchen demo (complete) 3. Carpet removal (complete - throughout) 4. Gas heater removal including tiles underneath Note: Stairs are involved as apartment is on level 1 Bin will be provided on site, but not immediately at the stairwell entrance

I would like these cabinets and tiles removed taking care not to damage the walls behind and the flooring.

I need brickwork removed and to create a doorway

Hi - need someone experienced to clean, lightly sand, stain and seal the following: A. Front porch deck (approx 7m sq). B. Outdoor pergola. C. Small outdoor barrel sauna. I can provide 6 litres of decking oil (natural)but need you to bring all tools and rest of supplies needed. Thanks

I’m looking for someone to assemble and install an Easyshed with gable roof - dimensions are 3m x 2.25m x 2.35m(h) (SKU: EG-D3023) The shed is due for delivery Friday 19th March. Preference would be to assemble on Saturday 20th if possible but would be willing to wait for right tasker. The shed is to be fixed to a concrete base (I have ordered Easyshed concrete fixings to be used). The shed is to be centred on the 3.1 x 2.35 base. Photo of base/location provided for reference.

Install an Aluminum Louvered Pergola. Size 4 meters wide x 5 meters deep x 2.6 meters high. It is to installed on a 5x5 meter timber deck. The pergola has 4 large posts that need anchored to the timber deck with bugle screws. This is an Outmus Pergola. Please refer the YouTube video about install instructions. This usually takes one day for 2 people. https://youtu.be/tMc1lQE4BtQ?si=m_a9c7PhSA4hcKD9

I need to demolish a timber shed The shed is empty 4.5x3.5m Rubbish removal of the shed as well

Hello, looking for someone to build a small VIC Ash pergola and deck (in the exact style in the picture), with 3-5 steps. Size is 4.3m x 2.3m and approx 3m tall. Many thanks

I just bought an easy shed and need help installing it :) I have a timber base already built. See photo.

Tasker will be removing the concrete surrounding the steel column x 9 columns for an area of 1m below the top of the column so the steel column is cleanly exposed. The Tasker will need to use a light/medium size hand jack hammer and angle grinder to first cut a grid of cuts so concrete pieces will pop off easier once touched with the jack hammer. Some of the columns (as pictured will need the use of a scissor lift, which I will provide along with training on how to use safely for the Tasker. If the Tasker has a ‘yellow card’ (EWPA) that will be looked upon favourably. If the Tasker has their own tools, that will be looked upon favourably. Safety clothing, ear/eye/foot protection is a must. Refer pictures for more details. Open to any questions. Work time is flexible and can be undertaken over a number of agreed days but the right tasker is probably capable of finishing the same day. Car parking access is easy where Tasker’s vehicle will be within meters of where Tasker will be working. Work cannot occur before 7am or after 6pm. If on a Saturday not before 9am or after 3pm. Refer to pictures for more info or message. With thanks.

Hi there, I need to get a redundant piece of concrete driveway removed from my backyard ideally this week. Please include to cut, remove and dispose of the concrete including cutting and removing the small corner near the entrance to the garage. Sizes are on the photos and it is the red hatched area that needs cutting and removing I need to get this work completed this week, please only price If you can complete this week by Sunday Easy access to rear gate to almost drive up to Thanks

I have a faulty motorised gate to the driveway that needs to be replaced. The doors are misaligned and we want to change it to a sliding gate door and make the gate opening wider. And also we have a garage roller door that doesn’t open properly this needs fixing. Quote please.

# Fix Driveway Bollard Lights ## Job Description Need a licensed electrician to fix two bollard lights along my driveway: 1. **Repair one light** - not working (needs diagnosis and repair) 2. **Replace one light** - knocked down and removed, needs new matching bollard sourced and installed See photos for reference of existing lights and locations. ## Requirements - Licensed electrician - Experience with outdoor lighting - Please quote parts separately from labour ## What to Include in Quote - Labour costs - Estimated cost of replacement bollard - Any other parts needed Happy to discuss before accepting. Thanks!

We need a shed and the concrete slab it is sitting on to be demolished and the debris removed. The shed / slab measures approx 2.5m x 4m. It is in the back corner of our property and the only access is via the front gate - approx 35m distance. The shed itself is in good condition and could be re-used potentially, although the internal uprights are cemented in.

Remove and Replace Laserlite Clear 2000 to small rear pergola.We shall supply Laser light,Screws and Noise stop tape. Use the existing polycarbonate as template. You will need appropriate ladders etc.