Find an experienced local architect in VIC

I am looking for an experienced draftsperson or building designer to help prepare floor plans to build a Granny flat in the backyard of the existing property + home extension of existing property, potentially convert an existing house into a dual occupancy with extension. Property located at Whittlesea Council, VIC - Australia. What we need • Practical floor plan options for dual occupancy Advice on the best layout for: • Internal separation / common wall options (For Extension) • Keeping structural changes simple and cost effective We want a solution with: • Low structural changes • Low disruption • Cost conscious design

I need a floor plan drawn up for a mechanical workshop in Brunswick

In warehouse in Deer Park Vic 3023

Need some renovations - remove couple of walls and open up the living area, add another wall and turning pergola area in ti kitchen, close the garage door with wall

I need a qualified draftsperson / architect to revise and upgrade my existing commercial layout drawings for a café/restaurant project. I already have full plans (layout, plumbing, electrical), but they are not clear and not ready for construction or council approval. Scope of work: • Update existing layout with design changes (e.g. toilet relocation) • Produce clean architectural floor plan (builder-ready) • Coordinate with existing services (plumbing, drainage, etc.) • Ensure compliance with Australian standards + NCC • Prepare drawings suitable for: • Building permit • Council submission • Builder pricing (Builder Saviour) Deliverables: • DWG (AutoCAD) files • High-quality PDF set • Properly labelled, dimensioned plans • Clear legend + annotations Key requirement: This is NOT a basic redraw — I need professional documentation acceptable by council and builder Files provided: • Existing layout + services drawings

Hi, I’m looking to restump my house and was wondering if you’d be able to come over and have a look tomorrow. The property is located in Jeparit, VIC 3423.

Will require someone to come in person to measure and then draw up architectural plans for renovation to existing alfresco, kitchen, laundry and bathroom in sliding changes to walls and doorways. Drawings must be completed to a level suited for council permits with proper CAD software.

Garage 5.3m x 3.6m made of single brick with some double brick pillars requires an inner wall of wood frame and plasterboard. Also a ceiling is required, including new battens to be attached to beams (beams are spaced 0.8 m apart so too far apart for plaster to be attached without battens) Garage door to be replaced with a sliding door (I purchase this). Any gaps around this filled with wood or wall. Also needed is a 2.3 section of internal single-sided plaster wall separating garage from the adjacent shed/studio. Photos have wood airing against walls and boxes - these will be moved by me asap.

Registered Architecturak Drafting services, Building drawings. Documentation for permit approvals. Call us on how we can assist.

Half of Garage Conversion to 1-Bedroom Unit – Labour + Materials (~$45k Target) Looking for an experienced builder/team to convert an existing garage (~7.9m x 5.2m) into a self-contained 1-bedroom unit. Floor plan available. Scope of Works: Framing: Internal walls for bedroom (with robe), bathroom, European laundry, and open-plan kitchen/living. Linings: Insulation + plasterboard (moisture board in wet areas), set and sand ready for paint. Flooring: Hybrid flooring to living/bedroom, tiles to bathroom/laundry, skirting installed. Waterproofing & Tiling: Waterproof bathroom/laundry. Tile bathroom (floor + shower), laundry floor, kitchen splashback. Kitchen: Supply & install basic cabinetry, laminate benchtop, sink, oven, electric cooktop, rangehood. Bathroom: Supply & install shower (900x900), vanity, toilet, tapware, accessories. Laundry: Cabinet/storage, washing machine connections, tiled floor. Electrical: Lights, power points, exhaust fan, smoke alarm. Plumbing: Full rough-in and fit-off (kitchen, bathroom, laundry). Split System: Supply & install AC to living area. Painting: All internal walls, ceilings, trims, doors. Finishing: Site clean and rubbish removal. Notes: Existing structure only (no major structural changes) Budget/rental-grade finishes (not high-end) Builder to supply labour + standard materials Open to cost-saving/value-engineering suggestions Permits handled separately if required Budget Target: ~$45,000 total (labour + materials) Please include: Full quote breakdown Timeline Inclusions/exclusions Examples of similar work

Hi, I’m looking for an experienced draftsperson/building designer to make minor revisions to existing architectural drawings for a dual occupancy project located at: 📍 69 & 71 Jesson Crescent, Dandenong VIC 3175 📐 Project Status Subdivision complete (separate titles) Architectural drawings completed (DWG + PDF available) Structural engineering completed NatHERS + Whole-of-Home energy reports completed 👉 Project is ready for building permit stage 🔧 Scope of Work (MINOR UPDATES ONLY) Add energy compliance notes to plans: Induction cooktop Electric oven Reverse cycle split system heating/cooling Heat pump hot water system (min. 17 STCs – Zone 4) Solar PV system (~2.5kW, west facing, 22.5° roof pitch) Window update (ventilation compliance): Bedrooms (Bed 1 & Bed 2) windows currently fixed Change to awning/openable section Apply consistently to both ground and first floor Minor drafting adjustments: Maintain consistent window heights: ~40cm from ceiling ~35cm from floor Add small highlight window to external doors (for natural light) General review: Confirm boundary alignment between both dwellings Ensure drawings are suitable for building permit submission + energy endorsement 📦 Deliverables Required Updated DWG files Updated PDF drawing set (permit-ready) ⏱️ Timeline Looking for fast turnaround (2–5 days preferred) 💰 Budget This is a minor update job only Please quote accordingly (not a full redraw) 📎 Files Available Full DWG architectural set Engineering drawings Energy report 👉 Everything ready — just needs updates ⚠️ IMPORTANT Must have experience with Victorian building permits / NCC compliance Please confirm you can work with existing DWG (no redraw)

10 years off experience Work with honesty

House extension adding bathroom and one room

Please confirm you have experience with Monash council submissions in Victoria (Report & Consent or building permit drawings). I need an experienced draftsperson / architect to prepare drawings for a front fence and gate for a Report and Consent application to Monash Council (Victoria). Scope of work: - Prepare a Site Plan (1:100) showing: • Property boundaries • Existing dwelling • Proposed front fence and sliding gate • Driveway location • Basic neighbouring building context • North point - Prepare Fence Elevation drawing (1:100): • 1.5m high aluminium blade fence (horizontal slats, semi-transparent) • Sliding electronic gate (same design) • Clearly labelled dimensions and materials - Include key notes required by council: • Fence height (1.5m) • Material: aluminium blade (semi-transparent) • Gate type: sliding • Indicate that sightlines at driveway are maintained Purpose: These drawings will be submitted for a Report and Consent application (Regulation 89 – front fence height variation). What I will provide: - Property address - Photos of front yard and driveway - Approx dimensions / sketch if needed Deliverables: - PDF drawings (ready for council submission) - Scaled (1:100) and clearly annotated Experience required: - Experience with council drawings / building permit / Report & Consent in Victoria preferred Timeline: ASAP (within a few days preferred) Please include examples of similar work if available.

Plumbing, flooring, plaster, carpentry, electrical

Have a small bedroom wanting to build a small bathroom with shower vanity and toilet need a drawing of some ideas

Hi, I’ve recently purchased a property in Heathmont and am looking for experienced tradespeople or a small team to handle a series of renovations and repairs. Scope of work includes: Structural: Floor joist repairs (subfloor) to address bounce or unevenness. Leak Repair: Identifying and fixing existing leaks (likely bathroom-related). Kitchen & Bathroom: Complete remodel/renovation of both areas. Flooring: Replacing/installing new flooring throughout the house. Requirements: Must have previous experience with structural repairs and wet area renovations. Licensed plumbers and carpenters preferred. Please provide photos of previous work or a link to your portfolio. Site inspection is required for an accurate quote.

Take my attached garage that’s already converted to the next level. I want to use half of it as a home office and the other half I want to open up to create a relaxing space for outdoor dining and bbq

Copy over an existing pdf and continue the drawing to add building surveyor requirement to obtain building permit

Floorplan for a home on land with 14 frontage