Find a reliable appliance technician in Riverstone

Need 2 electric recliners repaired as they no longer work

I need two hose reels fitted

I brought a brand new dishwasher and need the old one disconnected and new one installed

Oven is not working Igniter not working on gas cooktop Motion sensor need battery change( notsure)

Need to change haier front load washing machine gasket I can arrange seal from online shopping this is causing machine to leak from front

The washing machine drainage is stuck while it's still running with clothes inside. The filter on the front seems to be fine. The drainage pipe or any other filter needs to be cleaned

Find fault and repair broken smeg oven. The light works though

Need to inspect and fix the cooling issue. Brand: Beko * Model: GNE58820DX * Product Code: G84605NEL 2019 model. I have a Beko GNE58820DX. The compressor is cold and silent, the evaporator fan runs, and the fridge doesn’t cool. I don’t want parts replaced by guesswork. Can you diagnose whether the compressor control module, main board, or compressor is faulty before replacing anything?

My washing machine is not draining, and not spinning I don’t think.. after the washing machine finishes, the clothes are still wet and dirty. So I did drum wash, but not the water is not draining in the washing machine. The brand is Kogan.

I wanted to replace the power point switch. It has single slot and would like to replace it with twin power point switch. Tasker to provide the swich as well.

Electrolux Gas Cooktop burning with yellow flame - just one burner has this issue.

Washing machine comes up with FA and it’s locked cant figure out how to fix it The brand is HAIER

Bosch 4-burner gas cooktop with a faulty control knob/valve mechanism. One of the burner knobs has become stuck in the depressed position. The knob can still rotate and the burner can be turned on and off, however the push-to-ignite mechanism does not return to its normal position. Symptoms: Knob/spindle remains pushed down after being pressed. Continuous ignition clicking/sparking occurs because the ignition switch appears to remain activated. Burner operation otherwise appears normal. No noticeable gas smell. Issue appears to be related to the internal spring/return mechanism within the control assembly. Additional Information: I have removed the knob and confirmed the spindle does not spring back up as it should. I attempted to inspect the cooktop but some retaining screws appear seized/stripped due to age and heat exposure. Looking for diagnosis and repair of the control valve, spring mechanism, or ignition switch as required.

Kitchen gas top - cupboards to the left and right below have a minor smell of gas. Require a qualified gas qualified tradesman to: - check gas and appliances outlets, valve connections, and lines; - performs pressure and leg testing if required; - inspect connection and diagnose fault; - repair any leak or issue found.; - Provide a report and photos by Sunday.

To install new dishwasher

Since 2 days, my Dishwasher isn't working. Its throwing an F30 error. Its a fisher & paykal dishwasher which is around 5+ years old. Model #DW60FCIX1. I dont see any leakage outside or water clogged in the dishwasher based on the troubleshooting that I did my own. I tried turning off and on both the power and the water. still no luck, The error code doesn't go away.

Disconnect the old oven Bosch HSG656XB6A (no plug) and install the new Bosch HBF134EB1A (10A plug). I will keep the old oven.

Hi, I need a 7kg clothes dryer wall mounted in the laundry, above the washing machine. The dryer will need to be securely installed on the wall with the correct brackets/fixings. Please bring the required tools and confirm if you can supply suitable brackets, or let me know what I need to purchase beforehand. Looking for someone experienced with dryer wall mounting and able to ensure it is safely secured.

Artusi dishwasher is leaking from beneath. Model number is ADW5001X/ADW5001W

Installation of new dishwasher- all plumbing is there just needs connection