Find a reliable appliance technician in Epping NSW

One of the knobs in the gas cooktop is not turning off and got free. Need to get the knob fixed.

Existing dishwasher pictures and measurement attached. Replacing current drawer type dishwasher (Width 895mm) with free-standing Miele dishwasher (Width 600mm). Model G7604 Built Under SC Front AutoDos. Pictures attached - both the unit name and installation dimensions requirement. 1. Take out the existing dishwasher. 2. Prep the area for ‘Built-under’ Dishwasher 600mm width - picture attached the new DW model, dimensions requirements. This requires building an internal wall/panel so the new DW can be bolted on. 3. Trim/Cut from existing dishwasher door panel to fill the gap from (existing dishwasher width is 895mm minus new one width 600mm = 295mm width trim) **No need to install the new DW** Just need to prep the area so it’s ready to install by Miele technician.

The fridge compressor sounds normal and the monitoring system is normal but at about 6pm Friday the warm fridge light came on. The fridge had just filled the ice maker. The Fridge is a GE that is over 30 years old. Its like the refrigerant system has developed a hole and leaked out

I need to change parts of my Miele oven including fan cover and heat parts

Fix beeping noise for fire alarm inside house. The red light flashing

I bought a new roof for my Z3 which unfortunately did not come with instructions. I’m looking to get someone to install it for me. This is the link to the roof I bought. https://www.ebay.com.au/signin/g/v%5E1.1%23i%5E1%23p%5E3%23r%5E1%23I%5E3%23f%5E0%23t%5EUl4xMF8xOjA2ODk0RTRCNUE4QzZDNkZGQTNBNDBGMDVEMjdEMkIzXzFfMSNFXjI2MA%3D%3D?mkevt=1&mkpid=0&emsid=e11400.m144671.l183838&mkcid=7&ch=osgood&euid=62dafeee219f400c94aef72a91db49f3&bu=45861391225&exe=0&ext=0&osub=-1%7E1&crd=20250517185824&segname=11400

Dishwasher is not working. Tried cleaning the fliter but it do not work. Stops after 5 mins after we switch on .

Install gas stove. May need to cut stone bench top as well

Shift dishwasher to new house remove cabinet there and fix dishwasher with plumbing and electric connection

The washing machine pipe needs to be installed, the connection is different to what I had in my previous apartment. It is just that the pipe needs to be attached to make the machine work.

Washing machine is a Bosch 6 is not draining properly and E-18 errors

Need repairs on Miele gas cooktop which doesn't ignite. Miele dishwasher works however makes strange noise. All 4 years

Fisher&Paykal 4kg dryer. Power comes on and buttons light up. When starting a dry cycle the drum doesn't spin and no air flow. Just a quiet hum. Price negotiable.

Washing machine installation - need to connect new washing machine in new apartment - should be quick and easy - you may need to provide a clamp

The pilot is’nt working on one of the stoves. The others are defective - sometimes gets sparks, constant clicking when turned on. The clicking continues after being turned off.

My washing machine Bosch series 6 WAT24261AU/04 is not spinning at high rpm. It does the washing cycle, but when it comes to spinning it starts slowly making a unusual noise as if bearing or belt is worn (have video but airtasker doesn’t allow to video) and then stops and then tries again and does the same thing till the end of cycle time leaving all the clothes wet. Drainage is working, but then again the sound is unusual. It has been sitting in storage for 2 years and then has been transported to a new place. Was working previously perfectly.

Current fully integrated dishwasher needs to be replaced with new. ( New machine spec attached) New Dishwasher will be installed by Miele Need work by carpenter or handyman 1. Take the front panel from existing machine and tailor/put onto the new. 2. This will leave 29.5cm gap (existing machine 895mm width vs new 600mm depth). Need to build new cabinet storage. Panel needs to match the existing. OR.. We could get built-in dishwasher 600mm (not integrated) and just build a cabinet

Deep clean washing machine service

Regas 2 frezzer draw units

I have purchased the clothes line cord and I have the instructions but I need a smart someone to take off the old cord which is broken and put up the new cord please.