Find a reliable appliance technician in Annandale NSW

Our washing machine is not draining properly. At the end of a cycle, water remains in the machine. If we open/remove the drain filter at the bottom of the machine, the water drains out manually, and there doesn’t appear to be any obvious blockage in the filter. Looking for someone experienced with washing machine repairs to check: the drain pump / internal drainage whether there is a blockage we can’t see whether the rear drain hose has been installed correctly or is contributing to the issue Please let me know your experience with washing machine repairs

We’re happy to pay more for the actual parts. We have a WVE6525 Westinghouse oven. The door hinges of the lower oven need repair - plastic cover that goes over spring has been broken both sides. We don’t need a whole replacement of the hinges just the plastic on top of the spring. And the hinges on the top oven needs loosening. We also need the oven to be cleaned if possible.

We have a dishwasher and a clothes dryer that both need fixing. The dishwasher is Fisher & Paykel. F30 is the error code. F30 means flooding or leaking. I have cleared the filter and i can't identify a problem. The dryer is Bosch: Serie 4. The noise sounds like an issue with the belt. Google tells me: It might be worn drive belt / a failing tensioner / idler pulley / or a clogged blower wheel. I suspect the belt but that's just a guess. Do you have experience with both brands? We'd love to have both appliances up and running asap. Thanks

I’ve got the two washing machine taps, you will need to supply the rest. I want to place a washing machine next to the bench left hand side. Need plumbing for water and drainage.

Need a licensed electrician to install new induction cooktop and dispose of old one. We also have other work with some light installation we can discuss once it is complete

Unsure of what is wrong with my washing machine. It stops every 10 mins during a cycle with an error code. Hoping for it to be fixed.

I need Voxtorp cabinet door to be attached to an Ikea dishwasher, for the dishwasher to be screwed into the bench, and for the dishwasher to be leveled.

Not exactly sure, just water coming out instead of coffee

Dryer isn’t working (Simpson 5.5kg). It powers on and sounds like it’s running, but the drum isn’t turning or rumbling inside. Seems likely that the drive belt may have snapped, as the motor appears to be operating but the drum isn’t moving.

Install the cover door on an ikea dishwasher, get it level so the door lines up with the doors on the other cabinetry, screw it to the kitchen bench. Note: dishwasher is already plumbed in.

We think the belt in our tumble dryer is broken. We need someone to assess the issue and replace the belt if needed.

SAMSUNG Model WA85N6750BV8.5kg Top Load Washer The washing machine won’t drain. I’ve tried the filter and hose but it won’t drain. I

the job is to remove the old counter top stove and inbuilt oven (all electric) and rangehood, and replace with a new standalone gas/electric cooker and rangehood. There will be some minor carpentry involved I think. gas line needs to be brought in from the outside gas water to the kitchen - approx 10m of copper I would imagine. I would love your quote on the job,

Need someone to fix / repair ON / OFF button on BT brick saw. Saw is and was working but button needs fixing. Saw is on site at annandale and needs to be fixed asap. thanks

Fisher and Paykel small dishwasher throwing error A6 and fails after a couple minutes

Hi there, we have an old New World Rangette which is in excellent condition however the gas oven is not climbing above 160 degrees even when the dial on the over is turned up to high. Unsure what is wrong. Perhaps needs a retrofitted thermostat?

Recent power outage showed not all house circuits draw from my Battery. And a few circuits seem to be on Controlled load meter, would like all to draw from battery & general Use metering.

Description: Hi, I need help replacing the halogen light bulb in my AEG DL8560-M extractor fan. It uses a G4 12V halogen bulb. The filter is easy to remove — the main part is safely pulling out the old bulb without damaging the socket. Please bring a small flat screwdriver or any basic tool you prefer. Quick and straightforward job. Location: Annandale Flexible with timing.

Electrician to check smoke alarms are in good working order - change battery if required - supply paper work that say they have been tested and all good - they have all been newly installed - two homes require this area 2038 and 2008

Check smoke alarm and all is working in residential home - battery replaced if required paper work stating all is ok