Hire a professional vacuum cleaner repair service in NSW

Kindly look at the photo. The red and black wire got detached. Need to connect the wire.

I have a Pullman Advance Commander 900 and it’s not powering up (no power at all). I am needing to get it repaired.

I need our Dyson vacuum taken apart and cleaned throughly

We had a vacuum cleaner holder fitted to the wall, which has come off. Need to drill a new hole in the stud to fix the holder and also patch up the old holes on the wall.

Intermittently starts and stops with no suction

Dyson lightball brush head roller not working. Have followed online instructions to remove any blockages and all is clear. May be the switch not working as cannot activate it.

Assembling and installing stick vacuum cleaner

Hi, I am looking for a professional water tank cleaner to remove sediment and sludge from the bottom of my 3000L Kingspan water tank. The tank is only 1.5 years old, but the sediment is currently discolouring the toilet water. Tank Details: - Brand/Size: Kingspan 3000 Litre tank. - Access: Very easy access at the side of the house. Entry: The tank has two large access holes at both ends (see attached photos). Drainage: Stormwater drainage is accessible nearby for waste disposal. Requirements: Vacuum System: You must use a professional vacuum sludge removal system to suck the sediment from the floor of the tank. I want to ensure the sediment is removed without stirring it up into the rest of the water. Pump Care: Please check the pump inlet/filter to ensure no sludge is blocking it, as I want to reduce wear and tear on my pump. Water Handling: I am happy to have the tank drained before you arrive if preferred, OR I am open to a "minimal water loss" clean if your equipment supports it. Please specify your method in your offer. Goal: Remove the sludge layer effectively so I can have clean, clear toilet water again. Please confirm in your offer if you have experience with Kingspan type of tanks (liner/poly safe) and what equipment you will use.

Xiaomi Viomi S9 robot vacuum cleaner stopping with a message - main wheel stuck, tried calling but luck

On/off switch doesn’t work. Brand Electrolux z 5228 (quite old model)

The type of Dyson is a 'Light ball multi floor upright vacuum'. The rotation brush has stopped working and the inlet is hardly sucking (blockage in the ball section?) whilst the powerful motor is working as it should. Is it possible to have the machine back in its original working state (Rotation brush working on soft floor coverings carpets etc and powerful suction)

I need the plug on my vacuum cleaner repaired / replaced

Sauber Intelligence model SI - 200 has a broken side panel. The vacuum may need a general repair as it is 5-10 years old.

- power plug vacuum cleaner replace, one of the plug snapped

My vacuum cleaner, a cordless stick Akitas V8 doesn’t work anymore. I think it’s a battery issue. When charging, the 3 lights flash at the same time, which means there’s an issue. I’d like to know if someone could help repair/replace the battery

I need to replace the broken plug end of my vacuum cleaner. I live in Bondi but I can drop it off anywhere

A prong on the plug has snapped off. The plug needs replacing. The machine is a Hoover Allergy vacuum cleaner.

I have attached picture of what needs to be fixed in a freeze. I have also attached picture of robot vacuum cleaner. If you can only fix freeze, we will pay $80. If you can also fix robot vacuum cleaner, we will pay $200 in total.

Sparks coming from the motor of our Miele C3. Already pulled it apart. Just need someone to figure out what’s wrong with the motor and tell me if it needs a new one or if I can just replace parts.

Repair dead Debot D5 vacuum cleaner Have replaced battery