Hire a reliable rangehood repair service in East Melbourne

fix rangehood duct retape it around - Due date: Before Saturday, 2 December 2023

Hello! My tenants have reported the following issues that need repair. I will also need a tax invoice to be supplied. Thanks! 1. The rangehood is not turning on at all. Note, this is the most important repair in the list. 2. Bathroom door frame needs to be affixed (needs glue/nails) 3. Repair leak in the bathroom shower (likely needs caulking) 4. Door lock needs to be repaired/replaced. Please refer to photos attached. - Due date: Flexible - Due date: Needs to be done on Monday, 9 October 2023

Range Hood Exhaust fan does not seem working - Due date: Flexible

Fan is not working and need to repair. Thanks - Due date: Before Wednesday, 23 November 2022

Need Smeg range hood repaired. The fan of all levels does not work. We are in Balwyn North. - Due date: Flexible

Hi, looking to have someone help out with range hood repairs. Main issue is that the fan doesn’t spin (just a low motor hum). We’ve tried spraying some contact cleaner in an attempt to fix it but to no avail. Brand: ILVE Model: Sienna X200

I have an ILVE H75 slide out rangehood. It is 600 mmm wide. The fan works on speed 1, but when you slide the switch to speeds 2 or 3, the fan cuts out completely. The lights were working fine until a few days ago, but now they are not working as well. I need someone who knows electrical stuff to repair it.

We are looking for someone to repair our rangehood as the lights & fan currently aren't working

I have a basic 60cm Blanco Rangehood, pull out recirculating model. It is approximately 20 years old. It has a square 2 fan black selector switch on the underside. Only the higher speed fan is working and the lower speed fan is not working. Also, one of the light globes has blown. I need someone with experience with repairing rangehoods to diagnose the problem and repair the fan speed switch or whatever is causing the lower speed to not work. I would assume the fan speed selector switch is faulty. I also need you to replace the blown light globe (it is a small screw type globe). Must be appropriately licensed and insured, and familiar with Blanco rangehoods.

Looking for someone can fix both the below two jobs in one go: 1. Replace door seals for the first door of the property 2. Fix the button panel for range hood. The problem with the range hood is that once you press a button, all of the buttons go inwards together.

My 2 years old rangehood needs to be repaired. The fan is moving slower, around half of the power. The model of the rangehood: https://www.chefappliances.com.au/rangehoods/canopy/cs602s/ Need to check the root cause and repair it.

Its a BRS60X of Blanco. The halogen lights are gone along with the lampshades. Some of the plastic components are burned and melted. but the exhaust function is still working.

Range hood fan is not working

The Rangehood doesn't work possibly may need to install new one

Smeg Omega K25 PU Rangehood. Extractor fan stopped working. Lights still ok. Slight burning smell when extractor fan switched on (but extractor not going). Thank you.

Delonghi GAMMA90GL Fan motor is not working

It's a Rangaire rangehood. The fan has stopped working.

My PHOENX rangehood fans are catching and I cant seem to align them. have the covers off and need a professional

Rangehood fan stopped working. Suspect it is to fo with circuit board

One of the globe / bulb socket of the Miele range hood is not working. Hence need the same repaired.