Hire reputable rangehood installation and ducting services in Melbourne

Offer to Install a rangehood (need some advice of what type to buy). There is a vent on the other side of the yellow highlighted bit. Other spots may be tricky as there is timber behind them.

Remove existing rangehood and install new one. Might need modification for the cabinet

Looking for someone to find and install a replacement rangehood Previous one, no longer available. https://www.appliancesonline.com.au/product/blanco-under-cupboard-rangehood-bru5g

Hi everyone, I'm looking for someone to complete the following tasks. An electrician would be useful I think. 1. Install rangehood (no electrician required). There was an old rangehood that was removed, a new one needs to be installed in the same place. Install brackets, install new ceiling piping, and install rangehood. Electrical wiring all done. Just plug it in. See pics. 2. Install and connect oven to the same place as before. 3. Install subfloor. The subfloor is a single Scyon cement sheet that has already been sized up. It is there on site ready to go. The cement sheet just needs holes to be cut out of it so that the pipes can fit through. All this is to prep the floor for the tiler to come to do his part. I'm looking for someone who has experience in all three, Cheers. - Due date: Flexible

Remove and install rangehood. And gas cooktop (livenced plumber) - Due date: Before Wednesday, 31 January 2024

Replace old one(ducted) with new one (Bosch recirculating slideout 60cm model: DFS067A51A) Cabinet modification required to fit the new model. - Due date: Before Friday, 12 January 2024

Installation of 600mm extraction Rangehood, with ducting to external wall required - Due date: Before Friday, 15 December 2023

I need someone to install a 60cm canopy rangehood in my kitchen. The exact model is Beko BRH60CX (https://www.beko.com/au-en/home-appliances/built-in-range-hood/hood-wall-mounted-60-cm-brh60cx), and I already have it, packed and waiting. The kitchen previously never had a rangehood, and just used a ceiling fan, similar to what you'd find in a bathroom. The hole where the fan is also does not align with the stovetop. I don't know whether you would have to do anything about that, or if it can be kept as is. I took some pictures of the duct behind the fan, and it looks like no ducting/roof work will be needed, but please let me know if it is needed. If the ceiling hole needs to be moved, or ducting work needs to be done I will pay extra. I work from home and am very flexible on the time and day it can be done. - Due date: Flexible

Hi There, I want to get my old slide-out rangehood (Whirlphood brand 60cm) removed as it stopped working. Install the new slide-out rangehood (Technika brand 60cm) and take away the old one. This might involve modification in the cabinet. Please provide me the quote. Regards, - Due date: Flexible

Rangehood replacement required in my Appartment. 60cm Stainless Steel Slideout Retractable Rangehood. - Due date: Flexible - Due date: Needs to be done on Thursday, 12 October 2023

Our rangehood fell over. I've bought a new one which I need installed. It has a glass splashback which might need removing and then re-attaching to ensure structural support timber for secure fixing. Please see pics. This is the new rangehood we bought https://www.thegoodguys.com.au/emilia-60cm-slim-line-canopy-rangehood-ck60scf?istCompanyId=3bea4a6c-bec2-47ac-ad52-cc426c68327c&istFeedId=e8d5c196-db26-43bb-982c-cfe72bb147d0&istItemId=irwppilll&istBid=t&cq_src=google_ads&cq_cmp=1766242040&cq_con=68074089519&cq_term=&cq_med=&cq_plac=&cq_net=u&cq_pos=&cq_plt=gp&cq_loci=&cq_locp=9071256&cq_mtype=&cq_dvic=m&cq_dvicm=&cq_trg=&cq_pdid=CK60SCF&gclid=Cj0KCQjw0vWnBhC6ARIsAJpJM6eXKCoTtKb7_XshupK59wgOs1KCKh2NcU3DkFL0M5anbXI9J2b5bq0aAhF3EALw_wcB&gclsrc=aw.ds - Due date: Flexible

Old rangehood replacement like for like. Purchased a new Westinghouse 60cm slideout rangehood. Double storey block of 6 units with tiles roof. as per image the concealed cabinet trunk or silver lining goes above the roof truss. - Due date: Flexible

Hi there, would like someone to help install a rangehood (for induction cooktop) in joinery as well as ducting (to be provided) to outside. We are using existing chimney so should be fairly straightforward. See pics for model. Electrical sorted - see pics for chimney shaft. - Due date: Needs to be done on Thursday, 14 September 2023

Rangehood replacement required in my Appartment. 60cm Stainless Steel Slideout Retractable Rangehood. - Due date: Flexible

Install Fisher and Paykal rangehood with external blower. Needs roof seal kit. - Due date: Needs to be done on Wednesday, August 9, 2023

Hi. Looking for someone to install this external ducting kit for a Sirus rangehood: https://siriusbrand.com/products/sirius-150mm-tiled-roof-ducting-kit-easyroof-150t - Currently ducted into roof space - Roof is on top of two story apartment (which is 6m high) - Tile roof - Ducting kit supplied - Gas cooktop - rangehood is 65cm above cooktop

I have some white overhead cupboards that need to be cut down in height to enable a new rangehood be installed - this needs to be modified to a compliant height about the cooktop below it. Currently the rangehood is sitting 585mm above the cooktop trivets and it needs to be a min. 650mm. To clarify the scope - I think it needs to include for the following: Visit the property in North Carlton - check measure. Remove the existing rangehood. Remove the existing cupboard doors, trim them down in height to suit, re-edge and finish the cupboard doors. Maybe needs an adjustment to the handle location - ready for re-fit. Buy the new rangehood (Westinghouse WRR604SB - RRP $249), install to the compliant height requirement of min. 650mm above the cook top trivets. Connect rangehood back into the existing duct. Fill and finish any new gaps or unsightly / raw edges between splashback, the side cabinets, and the new height of the rangehood with a neat painted / finished trims - so it all looks good and meant to be. Allow for any sundries such screws and caps. Test to be sure in working order. Discard old rangehood, remove all waste, and clean up. Provide copy of the receipt of purchase of the rangehood - just for warranty purposes.

Need a sparky to remove old rangehood and install new rangehood. - Due date: Before Sunday, 16 July 2023

Install undermount rangehood and install the external blower. Fisher and Paykal brand. Need roof trim kit also for aluminium roof - Due date: Needs to be done on Thursday, June 8, 2023

Looking for a rangehood guru to remove/disconnect rangehood motor fan from unit, clean with degreaser/appropriate cleaning solution, clean internals of rangehood, and reinstall/reconnect rangehood motor fan. Pics attached. Thanks! - Due date: Flexible