Find a reliable appliance technician in Brisbane Southside

ILVE Fridge Freezer Model ILREF256I/R2 Built In Fridge The only section cooling is the Vegetable tray. Turned Fridge off for 10 minutes and then turned back on. Re-set all temperature settings to default settings. Only Vegetable draw is cool. Top 2 sections very warm. Freezer seems to be working fine - all foods still frozen.

New Freezer, needs swapping over, empty not used, so can move around. A quick job

The muncher is not working

Dishwasher is not draining properly and leaking out bottom kicker board.

I have a switch which controls my oven/cooker unit and it snapped half. Unsure of what it did originally i safely disconnected the broken switch snd wrapped each cable in electrical tape. Now that I realised Ive got not power to my cooker unit i need either the switch back or the 2 cables (both red) tied together to keep it on permanently

I’m looking for a licensed gas fitter to install a new gas bottle connection at the property. This is a new setup, so the job may include installing the required regulator, piping and connection point, connecting the gas bottle, testing for leaks, and ensuring the installation complies with relevant safety requirements. Please let me know your availability

I have a new oven that has been installed that needs a cut out in the cavity as it is pyrolytic for airflow.

Like for like gas cooktop installation. Stone benchtop, 60 cm gas cooktop.

Looking for a licensed plumber to safely isolate, disconnect, and permanently cap off the plumbing lines for a kitchen dishwasher cavity. Removal & Disposing of the dishwasher needed also. I will be converting the space into a permanent cupboard. The Appliance: It is a fully integrated Fisher & Paykel double DishDrawer, located directly underneath a wall oven. Location: Annerley, lift to second floor and inside parking in the complex. Timing: Flexible, but looking to book within the next few days. Tasks Required: Safely isolate and disconnect the dishwasher water supply, drainage hose, and electrical connection. Permanently cap off and seal the hot/cold water intake valves and the drain line connection (likely under the adjacent sink) so the cavity is completely safe, dry, and ready for a cabinet insert. Carefully slide the unit out of the cavity without scratching the kitchen floor tiles or damaging the surrounding cabinet/oven frame. Please remove and dispose of the dishwasher also.

Samsung WW85T504DAE washing machine shows “Check drainage / Clean drain filter” during a normal wash. I have cleaned the drain filter and checked the drain hose. Drain/Spin completes normally. Looking for someone to diagnose and repair the drainage issue. Please advise before replacing any parts.

We have an integrated dishwasher in an approximately 8-year-old apartment kitchen. The dishwasher recently developed a leak and we had a dishwasher repair technician attend and fix it. The leak is now resolved, but after the repair the dishwasher was not secured back into the cabinetry properly. The repair technician was not able to resolve this. The dishwasher can now move/wobble backwards and forwards within the cabinet cavity. Because it is moving, the top of the dishwasher falls slightly backwards into the cavity and the door cannot latch properly. At the moment we cannot reliably close or latch the dishwasher door at all. We are looking for someone to securely fix/mount it back to the surrounding cabinetry so it cannot move, supply/install any suitable brackets, screws or fixings if required, make sure the dishwasher door lines up and opens/closes/latches easily and reliably The dishwasher itself is working and the leak has already been repaired. No plumbing or electrical work should be required — this task is specifically about physically securing the dishwasher correctly in its cabinet space. Would love to have this completed ASAP.

My Samsung 8.5kg front-load washing machine is not draining. Model: Samsung WW85T504DAE/SA The machine shows “Check drainage / Clean drain filter.” I have already completed troubleshooting with Samsung Support: Drain filter has been removed and checked — it is completely clear. Pump impeller can rotate and does not appear to be stuck. External drain hose is not kinked. I disconnected the drain hose from the household drain and placed it directly into the laundry sink, then ran Drain & Spin. No water came out. A large amount of water remained inside the machine and had to be manually drained through the emergency drain hose. Samsung Support has advised that the washing machine now needs to be inspected by a repair technician. I am looking for someone experienced in washing machine/appliance repairs, preferably Samsung, to diagnose the problem and repair it if the cost is reasonable. Please let me know in your offer: Whether your offer includes diagnosis/call-out. Your labour cost. Approximate additional cost if the drain pump needs to be replaced. Whether you have experience repairing Samsung washing machines. Please do not replace any parts without confirming the total cost with me first. Location: Calamvale, QLD Flexible with time.

The hot water is not working to the kitchen tap. Alsothe gas stove top is not getting any gas to it. Hoping to get fixed this weekend if possible other wise next weekend at the latest

My front load washing machine is leaking,It might be because of the seal has been damaged Model and the damaged seal can be seen on the photos provided. Provide your route with and without the part. The Washing machine brand is Haier. Thanks.

To fit new cook top above oven.

Looking for a qualified electrician/appliance installer to disconnect and remove an old cooktop, then install a new Devanti 60cm Electric Ceramic Cooktop with Touch Control. Scope of work: Disconnect and remove the existing cooktop from the benchtop cutout Leave the removed unit on-site, I will dispose of it myself Install the new Devanti 60cm Electric Ceramic Cooktop (Touch Control model) Connect to existing electrical wiring/circuit Fit into existing benchtop cutout Test all touch controls and heating zones for correct operation Ensure unit is secure, sealed, and level

connect a wire and install an oven

I’m looking for a handyman or appliance installer to replace an existing freestanding dishwasher at my home. * Remove old dishwasher * Install and connect new LG dishwasher * Ensure proper plumbing and electrical connection • Disposal of old dishwasher (optional) The current space fits a standard freestanding dishwasher. Easy access available. Location: Calamvale, QLD 4116

Dishwasher not injecting water.

We have an Everdure 4-burner gas cooktop in our townhouse and the gas pressure/flame from the burners is currently very weak. The cooktop still lights and operates, but the flame output is much lower than it should be and cooking takes considerably longer. We own the townhouse and have access to the property's gas meter/regulator. Photos of the cooktop and gas meter are attached. Looking for a licensed gas fitter to: - Diagnose the cause of the low gas pressure/flame. - Check the gas pressure at the cooktop. - Check the cooktop/burners, jets and appliance regulator if applicable. - Check whether there is an issue with the gas supply, regulator or line feeding the cooktop. - Rectify the problem if it is a straightforward service/adjustment/repair. - Let us know if any additional parts or larger repairs are required before proceeding. Licensed Queensland gas fitters only please.