Book a trusted oven repair and installation expert in East Melbourne

fix oven ignition button or knob?

I would like to have the new oven installed. It is hard-wired. Please see the attached pictures.

when i light my gas oven the flame comes up when i push the ignition button and when i turn the knob i have to push it in really hard or otherwise the flame will go out. i think it is the button

Hi, looking for an electrician to replace Oven. Old one is Miele 60cm, new one is Bosch 60cm HBA572EB3A. Oven is Hardwired. Though both the models (old and new) are 60cm, I am not sure if any cabinet trimming or modification might be required, please factor that in too. Would require Certificate of Compliance. Location is Doncaster East.

Smeg oven Replaced both elements and thermostat. Oven turns on but no heating up

Smeg oven needs repairing. Not heating up so it could be the element.

Diagnose if this is the issue, and replace parts, or fix the oven as needed

I need to get a small cupboard built and a trim around the oven and entire area.

Electric oven does not heat up on any settings. Miele do not stock parts for this model as its too old & that is was most likely the heating element. Looking for someone experienced with Miele ovens that can diagnose issue & be willing to fit aftermarket or salvaged parts. We are looking to repair rather than replace.

Need an electrician to install Oven. I already have a new Oven, just need to take out old one and install new one. Old one is also working, so no new powerpoint would be required. Old oven can be left behind, I will discard myself

Need someone to fix a commercial gas oven in a restaurant kitchen. Oven not working properly – could be knob/control issue but not sure.

Fix my bosch oven which is slightly dislocated from its original place but perfectly working

My Miele 90cm oven has already had parts replaced, but it is still tripping the circuit breaker. * Please provide a fixed total price (including labour and any call-out fee) * Let me know if parts are included or extra * If unsure, provide a maximum estimated total cost before starting * No additional charges without my approval

Technika oven, heating element fault? Fan and light still working.

Remove oven replace wooden frame (wood veneer) and re-install oven. Currently there is a gap around the oven, specially at the top, as the new oven is smaller than the old. Please see pictures attached

We just moved into our house and have found the oven to make some strange noises. The fan-forced function in particular seems to have issues. So we would like to have the oven checked out for necessary service/repairs.

Looking for a licensed electrician to replace a built-in oven. Job details: • Remove existing Bosch Series 2 hard-wired oven • Install new Westinghouse WVE6314SD (60cm) • Same cabinet cavity – no cabinet modification required • New oven already onsite • Existing oven is hard-wired – happy for the new oven to be hard-wired as well if suitable • Old oven disposal not required Location: Doncaster Parking available. Flexible with timing this week and happy to work around your schedule if you are already in the area. Please confirm: • You are a licensed electrician in VIC • Your licence number • Your availability Estimated job time: 30–45 minutes.

Connect natural gas pizza oven to existing gas outlet And core drill 35mm hole into timber substrate

I am replacing an old built-in oven and need a licensed electrician to assist with electrical work. Tasks required: Disconnect the existing hard-wired oven connection inside the oven cabinet. Install a proper 15A oven power point inside the oven cabinet so the new oven can plug in. Check and replace one wall power socket (double power point) that makes a buzzing sound when a power board is plugged in. Details: • Existing oven: Electrolux 60cm built-in oven (approx 3.1kW).• Current oven connection is hard-wired with a taped connector behind the cabinet.• The new oven will require a 15A plug connection.• Oven cabinet depth is approx 560mm.• Please install the oven socket inside the cabinet (preferably rear corner) so the oven can slide in fully. Also one wall socket nearby produces a buzzing sound when a power board is plugged in. I would like it checked and replaced if necessary. Requirements: • Must be a licensed electrician• Please bring required parts (15A oven power point and standard double power point if replacement is required)

Tenanted property. Remove existing double oven and dispose of. Install supplied double oven.