Hire a trusted gas stove repair and installation service in Inner South West Sydney

Job: Gas cooktop burner repair – Belmore NSW Looking for an experienced licensed gasfitter to repair one burner on my gas cooktop. The problem: - The burner lights while I hold the knob down, but the flame goes out as soon as I let go. - The white ceramic igniter pin next to the burner looks worn/eroded. I think the thermocouple (flame failure device) and/or the igniter needs replacing, but happy for you to diagnose. Cooktop brand/model: Technika Thanks

## Licensed Gas Fitter Needed – Gas Cooktop Installation (Kogarah, NSW) I’m looking for a **licensed gas fitter with a valid NSW licence** to help install a new gas cooktop at my house in Kogarah. **Please do not apply if you do not hold the appropriate NSW gas-fitting licence.** **Preferred date:** Saturday, 17 October 2026, during the day after 12pm. **Parking:** Driveway parking available. ### Scope of Work 1. **Remove existing gas cooktop** – I can assist with removal and disposal. 2. **Install new gas cooktop** – Electrolux 60cm Natural Gas Ceramic Cooktop (Model: EHG635BE), already purchased. 3. **Enlarge existing benchtop cut-out** – The benchtop is laminate, and the existing cut-out needs to be enlarged slightly to accommodate the new cooktop. - New cut-out width: 560 mm - New cut-out depth: 490 mm I’m a qualified carpenter and can assist with the benchtop modification using a jigsaw and circular saw, if appropriate. 4. **Connect and safety-test the cooktop** – Complete the gas connection, installation and required safety testing. Existing gas and electrical outlets are available below the cooktop. ### About the Job I’m a qualified carpenter and happy to assist with suitable preparation and other tasks to help get the job done efficiently. **I don’t think the job will take too long**, especially as I can help with the removal and benchtop modification. All gas-fitting work must be completed by an appropriately licensed professional. Please get in touch if you hold the required NSW licence and are available on the preferred date. When responding, please confirm your licence, availability and quote for the job. Thank you!

New oven install, only the gas line needs to be plumbed everything will have been installed and put in place by the electrician.

Hi, I need help fixing one burner igniter on my Omega 4-burner gas cooktop. The Problem: We accidentally used charcoal on this burner, and now the igniter clicks normally when turned on, but the spark won't jump to light the gas. Current Status: Gas flows fine, and the burner lights immediately with an external lighter, so the gas line and ports are clear. The issue is strictly with the spark/igniter electrode (likely heat damage or carbon buildup from the charcoal). What's Needed: Someone to inspect the igniter and replace or fix the faulty electrode assembly. Please let me know your call-out fee and estimated price for the repair. Thanks!

Remove and replace kitchen gas stovetop

Removal and replace 60cm gas stovetop in house. Have bought replacement unit. Just needs install

Need to replace the existing gas cooktop and replace the existing sink. Gas cooktop’s top has already unscrewed only need to take unassemble base of the cooktop to take the cooktop portion out. With the sink, we need to unplug and take the whole sink out. The cutout need to be expanded by about 8 cm each side (shorter side only) Disposal not required as kerbside clean up in couple of weeks

Replace old 900 free standing gas stove and electric oven. The new connection needed to be done this afternoon or tomorrow

Replace and instal new gas cooktop range hood and electric oven. Require plumber and electrician

**Licensed Gas Fitter Needed – Replace 60cm Gas Cooktop * I'm looking for a **licensed gas fitter** to replace my gas cooktop **Job includes:** * Remove the existing gas cooktop. * Install and connect a new **Chef 60cm Gas Cooktop (Stainless Steel)**. * Test the appliance and ensure it is operating safely with no gas leaks. **Requirements:** * Must be a licensed gas fitter (or hold the appropriate licence to carry out gas work). * Please provide a competitive quote. * Invoice required upon completion. Please send through your availability, licence details, and quote. Thank you!

I'm looking for a licensed gas appliance technician/plumber (or suitably qualified appliance repair technician) to inspect and repair the kitchen appliances. Issues: Gas cooktop has 4 burners, but only 1 small burner is currently working. Oven has power but is not heating. Please bring the necessary tools and advise if any replacement parts are required before proceeding with repairs. Looking for someone experienced, reliable

I need to have the old gas cooktop replaced with a new one. I have already purchased the new one.

I'm looking for a licensed gas appliance technician/plumber (or suitably qualified appliance repair technician) to inspect and repair the kitchen appliances. Issues: Gas cooktop has 4 burners, but only 1 small burner is currently working. Oven has power but is not heating. Please bring the necessary tools and advise if any replacement parts are required before proceeding with repairs. Looking for someone experienced, reliable

Replace existing gas cooktop – Riverwood NSW Looking for a licensed gas fitter to replace my existing 60 cm gas cooktop with a new Electrolux EHG635BE. Job details: Location: Riverwood NSW Remove existing gas cooktop Install new Electrolux EHG635BE Existing gas connection and cut-out (replacement only) Natural gas No cabinet modifications required (assuming the existing cut-out is suitable) Please test for gas leaks and ensure everything is working correctly Please provide a Certificate of Compliance for the gas work Please quote your total price, including labour and any standard fittings if required.

Disconnection of 3 old appliances, and installation of new : built in electric oven, integrated Rangehood and gas cooktop Removal of old appliances can be made by the company which will deliver the new appliances - in which case the tradie that takes this job will need to come to site either twice (once to disconnect the old and then connect the new) or at the same time when the new appliances will arrive. Must be certified electrician and able to connect gas stovetop. The new integrated rangehood will require some of the lower internal shelving in the existing cabinet to be cut back, as the current unit is a slide-out model. It’s ideal for the tradie to be able to make this modification as part of the installation. We do not expect the shelving to remain functional after the alteration—only that the rangehood is fitted correctly. Please see the attached image for reference.

​Hi there, ​I am looking for an experienced appliance repair technician to fix a couple of issues with my 4-burner Fisher & Paykel stainless steel gas cooktop. ​What needs fixing: ​Stuck Gas Valve: One of the burner control knobs is completely stuck and will not turn on. ​Faulty Ignition: The burner lighter is no longer sparking. I suspect it needs a new fuse, igniter, or spark module. ​Appliance Details: ​Brand: Fisher & Paykel ​Type: 4-Burner Gas Cooktop ​I have attached photos of the cooktop, the valve stems, the igniter, and the brand plate for reference. ​If you have experience repairing gas cooktops and can source the necessary parts.

The Bosch dishwasher still not draining after I've cleaned the filter. The gas stove's largest hob only lights on one side. The Bosch dryer works, but there is a hose attachment for draining the water that I don't know how to connect.

Gas Cooktop Repair – Gas Valve Stuck Open One of the gas burner control valves on our cooktop has failed and is stuck in the open position. The affected burner is the top right burner. When the gas supply is turned on, gas flows continuously from this burner regardless of the knob position. For safety, the gas has been isolated at the mains. Looking for a licensed gas fitter/appliance repair technician to inspect and replace the faulty gas valve (or advise if another repair is required). Please provide a quote

Need to replace power socket of my gar stove.

Install gas cooktop + Certificate - i got cook top, 1200mm flexible gas pipe already