Find a reliable cooktop installation and repair service in West Melbourne

Cooktop ignition for all 4 burners needs replacement. Smeg 60cm Stainless Steel Gas Cooktop. Model: CIR60XS3

I would like to replace the old gas cook top with same model new cook top. Just the cooktop. Its easy only need to remove the top and install new one.

replace new gas cook top from Westing hose to bosh

Looking for a licensed gas fitter to replace an existing ILVE 90cm gas cooktop with a new Bosch 90cm gas cooktop in the same location. Must include: • Removal of old cooktop (Specify if included in quote) • Installation and gas connection of new cooktop • Testing for safe operation • MUST : Invoice and gas safety/compliance certificate required Please provide your full quote, availability, and licence details.

I would like to replace my old gas cooking stove with induction (Beko 60cm Induction Upright Cooker, Anthracite). It may require a new circuit. I am adding pictures of switchboard. The location is about 5-6m from the switch board

900mm gas cooktop , middle burner not holding to fire during ignition and another burner ignition not working

Plumber to extend copper pipe and connect cooktop

Hi mate, I have new cooktop 60 cm which i needed installed in alfresco area. Just needed to glue down and connect to gas supply. What would be the charges?

I am changing my gas cooktop to electric but the current benchtop's cutout is small for the new cooktop. I need a qualified stonemason to enlarge the existing stone benchtop cutout to fit a new electric cooktop. Current cut out is approx 820 x 480 mm. I would like the cutout to be 880 x 490 mm. - Must have experience cutting installed stone benchtops - Must use proper dust control - Clean, chip-free finish required

Need to change gas cooktop (60cm)

Fitting new gas cooktop to replace old ine

Need to fit new 90 Cm gas cooktop in place of my existing one but the cut out width is different so need to cut the stone or the wood under . The images from the bottom are attached here with . The existing is 733mm and the new width is 860

I have replaced benchtop and needs installation of new cooktop, old one was already removed

I am installing 600mm electric upright cooker. Require a license electrician to install a new 32amp circuit and isolation switch for cooktop.

I’m looking for someone,need to replace the built-in oven with a new one, and we’re also planning to change the gas cooktop to an induction cooktop.The induction cooktop we’ve purchased may require some adjustment to the benchtop, as the existing cut-out in the benchtop will need to be enlarged to fit the induction cooktop we’ve purchased.also,2 electricity switches in rooms need to be changed.

Need to remove an existing 900mm free-standing cooktop and install a new 900mm freestanding cooktop.

Need a plumber to connect a new gas cooktop which needs to be safely connected to the gas port. I can provide the cooktop but need the plumber to provide the regulator and connect to the port. Need done before 10am Friday, either later this afternoon or tomorrow morning.

I have a second hand gas cooktop I want to replace Second hand cooktop in first pic Old cooktop in second pic Removal and installation required

Remove the existing gas cooktop, and install the new gas cooktop. The old cooktop needs to be taken by yourself for disposing it.

I need one thermocouple replaced in my SMEG cooktop. I have the replacement part with me. I want someone to install it.