Hire a trusted appliance repair service in North West Perth

I have a Baumatic GEH6018 slideout rangehood in my kitchen. The white front fascia panel drops down and won’t stay up. Both mounting points look corroded and damaged. One side appears to be missing parts entirely – possibly a plastic cap, grommet or screw. I’ve taken plenty of photos and can share them. I just need someone who knows what they’re looking at to identify exactly what’s missing, source the part if needed, and fix it. Property is selling on 9 June so needs to be done before then. Located in Innaloo.

One of the hot plate of my electric stove top isn’t working

I'm not sure what the issue is but everytime I use the oven, smokes comes out of it

Treadmill stops after 10-20 mins of use comes up with e3 error code its a orbit starstrider treadmill i have looked at the speed sensor and that didnt seem to be the issue so im unsure what it could be

I feel like the pump has gone, sounds like water is trying to get into the machine but nothing happens

The transformer may need changing for the halogen bulb.

We have an overhead extractor fan above the hob in our rental and the buttons are stuck down we think with Greece so the lights work but we have no control over them and the fan works but we have no control over them because the buttons keep sticking down so we need somebody to come round and clean out the top where the Buttons are

Washing machine not draining

URGENT JOB - PERTH I need an experienced handyman, appliance repairer, or mechanically minded technician to troubleshoot and correctly repair a SNOO baby bassinet. The internal rubber O-rings have already been replaced, but the bassinet is still not rocking properly (limited range of motion / slipping / motor spinning but platform not moving). The task requires opening the unit back up and fixing one of the following highly likely mechanical culprits: 1. Re-centering and aligning the brown slider tracks/bearings to the top metal plates. 2. Checking if the platform screws or internal bolts were over-tightened (causing friction that stops the motor). 3. Ensuring the 3 small motor shaft O-rings are seating tightly and not slipping against the drive wheels. 4. Correctly reconnecting and cable-tying internal wiring harnesses if they are blocking physical motion. RESOURCES: - I have all the tools needed on-site (screwdrivers, pliers, zip ties). This should take less than 1 hour for someone handy who understands basic motor drives and alignment. Urgent turnaround needed as it is for a newborn.

Treadmill trips in 1 second when it is switched on

I'm after someone to help fix the belt on my treadmill. It just keeps moving to one side and getting stuck. Thanks

Broken connection piece. See photos

My dishwasher isn’t cleaning the dishes properly a piece has come off it that needs to be refitted.

W5965WPS WASHER Miele - Sn 117908867 - Drum/ BEARING noise and shock absobers worn need repaired and parts to be supplied. Second hand parts ok

My Westinghouse dishwasher has recently stopped working with an error code F1. I require someone to have a look and fix this issue please.

I need a pro. I think the drainage pipes have a clog might be a piece of plastic or cutlery cos none of usual tricks are working. Bosch basic dishwasher wont drain.

Is the second time now that we’ve experienced this error code and now the drawer doesn’t come out? I’ve had to switch the power off to it to stop the beeping. It was running all night constantly on that error code have tried to hold down the power button to reset it and read the manual to no avail.

Repair dishwasher with AE error code.

Repair PE error on top loader washing machine

LG Top Loader Washing Machine - WTG8521 Draining issue, cycle starts, drains most of the way then get a 03 error code.