Hire a trusted appliance repair service in Auburn South VIC

We have an 18 year old Miele W 502 washing machine. Washing machine cycle goes through the "Main wash" cycle but when it gets to the "Rinses" cycle, the "Check Inlet" warning starts flashing and the machine stops its wash cycle. My husband has already done the basic troubleshooting and disconnected the inlet hose from both ends (ie. from mains tap and from washing machine) to check for any blockages (and there were none). The filters and hose seals were then brushed and cleaned (they were already pretty clean), placed back into the Inlet hose and reconnected to mains tap and washing machine No issues with water pressure either from mains tap. Tested this by placing a measuring mug under the tap.

Dishwasher has issue. When starting cycle, after a few minutes it displays error E1 and stops. Sometimes when I turned the inlet tap off/on, it worked when reattempted. Brand is ILVE and I have pictures

Fisher and paykel fridge keeps beeping and light intermittently going off

My samsung front load washing is suddenly stop while rinse cycle is ongoing and its show "5c error". Maybe drainage problems.

Ideally id be looking for retired plumber or the like. The unit is a rinnai gas wall heater approx 30 years. It attempts to light fails and turns itself off.

Fisher and Paykel 6k saying lint blocked however has been cleared - think needs a service - today after 3.30pm if possible

Repair job on ceiling and cornice, install new range hood.

I have a washer dryer. It is not drying anymore. It is an Electrolux EWW12753

I have a Bosch series 8 washing machine (model WAW32640AU) Over the last 18 months it seems to be skipping spin cycle (especially when using cold water). At the end of the overall washing cycle the clothing is still soaking wet, however there is no water present in the machine. It seems to skip the spin cycle. I dont know whether this is water drainage problem or a spin cycle problem. I have opened the service flap in the bottom right corner of the machine and drained the water from the hose. The issue is still occurrng on average every second or third wash. I suspect the machine is blocked somewhere or needs some kind of clean out to fix the problem. Photos of the machine are attached. I am located in Hawthorn 3123.

Electrolux front loader. E20 error code. Have cleared out the filter. Now machine won’t empty.

Before 12:30pm. Dishwasher repair. Water is backed up at the base of the dishwasher and the filter is clear.

Having issues with my Fisher and Paykel Front Loader Machine is having issues draining, I think it may have to do with the angle of the drain hose or an issue like that. Potentially may be an issue with the drain hose itself or will need to cut a new hole using holesaw to fix angle. Please have tools incase this is necessary but really do think it's a simple fix given we have never had issues with this before. Drain pipe isn't broken because it still drains when angled down. Looking for someone to come and fix the issue whether it's a longer extension hose or a new hole. Thanks!

Fisher & Paykel WH7560J1 sometimes says Error 75 after wash and beeps until switched off. I believe this relates to water heating and may require a new element.

BLANCO BMS604 oven from 1999 is not quite getting up to heat, maxing out just below 200c. Although it is very old and dirty, it was fine until recently. As grill still works perhaps it is a hidden bottom element. Not sure what to quote. Feel free to suggest different quotes.

We have a WD870EJA Samsung washing machine showing an E3 error. Wondering if anyone will be able to come to have a look at it and fix it. We have checked for any blockages and saw a coin, however it has been removed and is still not working.

The fan on my fan force setting on my oven isn’t working. I would like the whole oven checked over and maintenanced.- brand is Platinum. Dishwasher needs maintenance. Doesn’t clean well except on heavy setting.- brand is Platinum

Suddenly, the blow fan does not work. (I can still hear the air-sucking noise from somewhere.) The heater is located in the ceiling. It may be 20 years old; I'm not sure of the manufacturer, but I can see the Honeywell thermo switch.

Oven won’t heat up- grill works, think heating element?

LG front loader WD1200d Washing machine spin cycle is not working properly. Makes a funny sound when spinning. It's either bearings or the belt. Rotor seems to be ok and has no wear and tear.

Washing machine rubber replacement