Hire a professional washing machine repair service in Parramatta

not sure what went wrong, it doesn't turn on and my clothes was in it during a wash and water was inside, not sure how else to describe it not familiar with the technicals of this WT-H7806 model

I have new big washing machine coming in 10 days and I want to install new tap outside for the new washing machine because is not fit inside were the washing machine space is

Samsung washing machine drum is not rotating. It happened due to the load.

Top door washing machine looks new and clean. After 10-15 mins wash, water is neatly drained out, but, during spin cycle, machine stops working. Need this fixed.

Front loader TCL WASHING MACHINE, shows timer but doesn’t show the lock sign and turn E3 after some time.

Samsung washing machine ( front loader) not draining properly .. keeps coming up with an error to check drain , however nothing visibly stuck in there.

Euromaide Front loader machine 10kg Showing error code E64 and then other time showing E50

My Samsung washing machine won’t finish the spin cycle. Keeps having error on the spin cycle.

LG top load washing machine showing error de not working

I need to connect my washing to this. Unfortunately i have a disability that i cant do this by myself. Photo attached

I'm looking for an experienced washing machine repair technician to inspect and repair my front-loader washing machine. Issues: - Loud rubbing/grinding noise during the wash cycle. - The drum feels loose and has noticeable movement. - After each wash, I'm finding tiny grey rubber particles on my clothes. I'm looking for someone who can diagnose the problem, advise what parts (if any) need replacing, and carry out the repair if possible.

Washing Machine is leaking under front door. We suspect the issue is related to the front load seal, which may need to be placed. There appears to be a cut in the seal and after a wash the seal becomes loose and creates tumbling noises and cause obvious leaks because the seal becomes loose during the tumble. Front load Washing machine is a Samsung Bubble wash 8.5kg WW85K54E0UW

My LG front-loading washing machine was reconnected by movers after moving house. When I turn the machine on, water leaks from the hose/connection at the back. I need someone experienced with washing-machine installation to: Identify exactly where the leak is coming from Check the inlet hose, rubber washers, threading and wall-tap connection Reconnect and tighten everything correctly Replace the washer or hose if required Check the drain-hose setup Run and test the machine to confirm there are no leaks Please bring basic replacement washers and, preferably, a compatible washing-machine inlet hose. I can reimburse the cost of any replacement parts if needed. The machine is already positioned beside the laundry sink, but it may need to be moved slightly to access the rear connections. Required: Experienced appliance installer, handyman experienced with washing machines, or licensed plumber. Must be available tomorrow.

Need a plumber to bring appropriate fittings to connect washing machine hot water, cold water and waste pipe. Photos of existing pipes/fittings attached.

My front-load LG washing machine has started leaking water. I believe the issue happened during moving, and I suspect the water inlet hose at the back has come loose. The washing machine is installed under a benchtop, so I can’t pull it out myself to access the back. I need someone to: * Pull the washing machine out safely. * Check and reconnect/tighten the water hose at the back. * Inspect for any other possible cause of the leak if the hose isn’t the issue. * Push the machine back into place after the repair. Please bring any basic plumbing tools that may be needed. Looking for someone with experience installing or repairing washing machines.

pedestal needs to be assembled and washing machine placed on it. Its a new westinghouse 8kg front loader

Washing machine has suddenly stopped working ! Need some one to attend it as soon as possible

Fix my Samsung washing machine. its showing a Flashing 4C error

When you open the lid there’s a leakage from the powder/liquid drawer