Find a professional built-in wardrobe contractor in West London

We have a built in wardrobe and dressing table that we need removed. The wall behind will then need repainting, and possibly the plaster being made good before that. The floor does not need treating, and the skirting board should still be intact.

I have a built-in wardrobe with mirrored sliding doors. The middle door got stuck on the right door because I accidentally slid the door while the drawer was open. Now, both doors are stuck together.

Need a built in wardrobe taken out and the light switch and wiring moved to another wall

Sliding doors for 2 bedrooms. Other room is smaller frame. Need 3 drawers made to fit inside the wardrobe as well. Will send dimensions once I get a quote. Please only reply if you can quote the job.

Just had a new built in wardrobe fitted. Need to have the carpet trimmed to fit around it.

Small alove in main hedroom just want a simple wardrobe with a few shelves built into it. Width 1.4m depth 0.3m height 2.4m

I need the built in wardrobes removed from the bedroom, the walls to be re-plastered following this removal and the entire room re-painted. I’d also require the carpet to be removed and a replacement to be put down/ potentially new floorboards fitted depending on what we decide closer to the time.

I want to create a built in wardrobe in my hallway with a set of doors . Shelving and hanging rail inside for items of clothing storage, shoes ..etc

I need someone to hang up 4 tall wardrobe doors to our built in wardrobe. And two smaller cabinet doors. There may be a small amount of sanding of door corners needed if any paintwork has been damaged. Also need the wardrobe/cabinet door knobs to be installed (holes already drilled)

Carpenter or skilled handyman required to help dismantle 2 x built in wardrobes and move a kitchen island. You will work alongside the main carpenter. £40 per hour and you will be required from 12pm til 5pm

I have some flat pack wardrobe that have no instructions! I do have 3D drawings and CAD drawings, please let me know if you can help, preferably within the next 2 weeks

Old built in wardrobe and dresser that need to be taken out

1) Dismantle for reuse the left hand built in wardrobe (1st photo) in order to install plasterboard behind 2) dismantle box  and redundant pipes inside on left hand side of this built in wardrobe (client can dispose of rubbish) 3) Install on dot and dab basis insulated plasterboard (client to supply) behind where left hand built in wardrobe(1st foto) and at the back of right hand cupboard(2nd foto - no dismantling required other than ubhooking and rehooking quick release doors ) were 4) Cut a piece of offcut insulated plasterboard and screw with offcut plywood client would provide to ceiling where the box was removed.   5) Reduce the size of 2 skiting boards so they do not get in the way when the left hand wardrobe is re-installed against the plasterboard   6) Apply lining paper (client to supply) to the insulated plasterboard   7) Re-install left hand built in wardrobe against the insulated plasterboard, client will supply cut plywood pieces for the left hand shelve, as the original shelves will not be deep enough once the box is removed.   Client will empty the wardrobe before work starts.  Parking is available on driveway. Worker to supply fixings/screws in case not reusable and tools/mixer for the job. client to supply insulated plasterboard, plasterboard adhesives, lining paper and adhesives

1) Dismantle these 2 built in wardrobe on left hand side(first photo) for re-use 2) Remove the box and redundant pipes inside the box on the left hand side behind shelves (old guttering from roof which had long been replaced by external gutters) 3) Install on Dab & Dot basis insulated plasterboard (client to supply both- workman to cut & size) 4) Cut a small piece of off cut insulated plasterboard on the ceiling where the box was. 5) Cut to size and install insulated plasterboard on right hand cupboard (2nd photo- no dismantling required other than unhooking and re-hooking the doors from quick release hinge) on dot & dab basis (client to supply) 6)Apply lining paper to insulated plasterboard 7) Reduce the length of the 2 skirting boards such that they do not get in the way of the wardrobe door once reinstalled 8) Reinstall the dismantled wardrobe . Workman to supply screws/fixings in case they cannot be used and use longer/suitable screw/wall plug for the now thicker plasterboard behind. For the shelves, client will supply plywood boards cut to size as the existing ones will not be deep enough once the box is removed. 9) Workman to come equip with the the necessary tools & equipment such as mixer for the plasterboard adhesives. Both the wardrobe & cupboard will be emptied before workman arrive

Need a handy man to help with building in built wardrobes for my new flat Also some other jobs can negotiate a price! - Due date: Flexible

Dismantle two wardrobes attached to walls, 180x200cm each. - Due date: Before Sunday, 6 November 2022

We removed a built in wardrobe. The place where it was built needs painting work matching other parts of the room. The woodstrip on ceiling to be removed and patched. Plastering. - Due date: Flexible

Sliding door has come off rails - think something broke & can no longer get it back on