Find a professional built-in wardrobe contractor near you

Wooden partition inserted between two built in wardrobes, with a padlock put on one of the wardrobe's doors.i 158 cm from floor to shelf. 44cm wide from door frame to wall 97 cm shelf to ceiling Happy with White Square edge Melamine-faced chipboard (MFC) Furniture board as materials if agreed.

My old built in wardrobe has been dismantled and in the front garden of my lower ground flat. I would like it removed.

A custom built-in wardrobe and shelves for our awkward angled wall (8ft across in total but ~100cm along the wall angels inwards for the remaining length ~150cm). Happy to use Ikea units if that will help bring the costs down. The light switch will need moving slightly too.

Dismantle and fit built-in wardrobe

Cut and fit decor panels to wardrobes to make them look built in around either side and top. Materials for finish already purchased from ikea

Remove current built in wardrobes, make new ones and put new flooring in

Sliding doors are on the wrong rails, top rollers seem to be fixed in the rail and can't work out how to get them off one rail and onto the next.

Build the Ikea wardrobes

I have an old, heavy built in wardrobe door. I would like it replaced with 2 Louvre Doors

I have a built-in wardrobe with mirrored sliding doors. The middle door got stuck on the right door because I accidentally slid the door while the drawer was open. Now, both doors are stuck together.

Need someone to source material and build a bespoke built in wardrobe, I have the CAD drawings / design Need quotes for work and materials.

Install shelf and clothing rail

I have two large built in wardrobe units & a window seat that need painting. I will supply the top colour paint but you will need to supply all other materials.

Remove built in wardrobe and re-wire electrics to the wall where the wardrobe been moved from.

Built in wardrobe attached to plasterboard wall on the corner of the bedroom, that needs to be removed.

I have ordered a made-to-measure built-in wardrobe, that has already been constructed in the room it is to go in to (see Picture 4). I need an experienced carpenter / joiner to finish the job by doing the following: 1. Cut out the skirting boards behind the wardrobe, to get a tigher fit to the wall (leaving the skirting board underneath the desk) - Picture 1. 2. Cut out a hole in the back of the left-side unit, to provide access to the plug in the wall. 3. Fix the wardrobe units to the wall 4. Add fitting (provided - picture 3) around the edge of the wardrobe, for a clean, fitted finish. 5. Fit the bridging unit between the two wardrobe units at the top, fixing it to the wall and to the wardrobes - picture 1. Note: the bridging unit is heavy, so this is likely to be a two person job. I am happy to help with the lifting / holding. 6. Add the doors to the bridging unit. 7. Generally ensure a clean and tidy finish. Tools required: circular saw, sander Instructions are provided with the wardrobe, although were of limited use in building the wardrobe, so some improvisation may be needed.

Need a built in wardrobe taken out and the light switch and wiring moved to another wall

Remove built in wardrobe from bedroom

I need a big build in wardrobe demolished and removed. Wood is very good quality, happy for you to take the wood.

Dissamble built in wardrobe. The dimensions are: 257cm high, 120cm long