Cooktop Installation & Repair Jobs in London

Browse through over 500 Cooktop Installation & Repair Jobs.

See what you could earn

£0

per month

Based on average cooktop installation task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Cooktop Installation tasks in London

Check out what tasks people want done near you right now...

I have a wooden sideboard ( circa 1930's) that needs renovation. You will need to collect it before 16th Sep we can arrange delivery later (approx Size 120x93x45cm ) The door wood veneer is pealing off, the internal draws do not slide along their wooden runners and fall out. The top needs ring marks removing and the whole thing needs revarnishing.

Welwyn Garden City, Hertfordshire

Tue Sep 01 2026

about 8 hours ago

Open

We have a rectangular bin cupboard we would like covered to be more in-keeping with our pub. I have purchased rolls of a the correct coloured vinyl. We are looking for someone to apply the new darker coloured vinyl over the top of the current vinyl finish. The cabinet has a hole in the top so for the underneath edge we would like the vinyl sealed in. I would expect all sides, back, top and both inside and outside of the door to be covered. The pub opens at 11am, Midday on Sundays and we would prefer to have the job completed before we open. Access times vary throughout the week: 8am Mondays, 9am the majority of the rest of the week, 10am weekends.

Whitehall, Greater London

Tue Sep 01 2026

about 9 hours ago

Open

painter, or local woodworker. Build and paint a custom 70x70cm MDF tabletop with slightly rounded corners and a flawless high-gloss burgundy finish, then attach it to a pre-purchased metal base. Materials likely Needed: (materials not provided) 18mm or 25mm MDF board, cut to 70x70cm. Zinsser B-I-N shellac primer (spray or liquid). High-gloss burgundy enamel spray paint (2 cans). High-gloss clear polyurethane spray (water-based/non-yellowing, 2 cans). Wood filler or drywall joint compound (for sealing MDF edges). Sandpaper (120, 220, and 400-grit). Pan-head wood screws (sized appropriately so they do not puncture the top). Step-by-Step Instructions Shape and Seal: Cut the MDF to 70x70cm and round off the four corners slightly using a router or sander. Rub wood filler tightly into all the raw cut edges to seal the porous MDF. Clear Coat: Seal the color with 2 to 3 coats of the high-gloss clear polyurethane spray. This builds the durable, thick, glass-like dining surface. Current advice from carpenter - would need someone that has done things similar to this

Wandsworth, Greater London, SW18 4

Tue Sep 01 2026

about 14 hours ago

Open

Top half of fridge has stopped getting cold. Bottom half of fridge remains cold. I took off the panel and it looks like the photo, need it fixed,

Tulse Hill, Greater London

Mon Aug 31 2026

about 24 hours ago

Open

We have wooden kitchen worktops that have been treated and protected using Top Oil. They are in need of sanding down and resurfacing again especially around the sink area to restore them. Please propose appropriate surface treatment, time required and and budget.

Holland Park, Greater London

Mon Aug 31 2026

1 day ago

Open

Hello, I’m looking for someone to tile the path and garden to the front of my house. The pathway will be black and white checkerboard style. The garden (which is now soil) will be tiled in 600 x 900 x 20 mm grey outdoor tiles. I have purchased all tiles and grout and happy to purchase whatever else is needed. Likely sand and cement/ adhesive. Between the path and the garden is a boarder which we will retain although part of the boarder has slipped and needs adjusting. Around the plants in the front garden we will also like to have a boarder separating these plants and the larger outdoor tiles. I need to purchase these boarders. Below these plants some old boarders still exist and need digging out. On the path I envisage the new tiles to go on top of the old tiles rather than smashing the old tiles off. I believe that is possible to do with the correct adhesive. No desperate rush for the work to be done as soon as possible would be good. Parking will be covered in street. Many thanks. Tom

Cottenham Park, Greater London

Mon Aug 31 2026

1 day ago

Open

I need an experienced handyperson to carefully dismantle a built-in wardrobe and repair the plasterboard wall behind it so it is fully ready for painting. Dismantling should be done without damaging the mirrored doors, tracks, wooden frame, or internal shelving. All screws, brackets, and fittings must be saved. The wardrobe does not have a back panel; the frame is fixed directly into the plasterboard. Scope of Work: Dismantle sliding doors: Remove two heavy mirrored sliding doors and their top/bottom metal tracks carefully to avoid bending the tracks or chipping the mirrors. Remove internals: Unscrew and remove 1 full-width top shelf, 1 central vertical divider, and 2 hanging rails. Remove frame: Detach the outer white frame, including the left-side end panel and the top fascia board, minimizing damage to the wood. Hardware preservation: Collect all screws, track glides, and fittings in a bag so I can pass them on to the buyer. Stacking: Neatly stack all wardrobe components in the room. No waste disposal is required. Wall preparation: Patch, fill, and sand all screw holes, rawlplug holes, and any plasterboard damage caused by the removal. The wall must be left completely flush and ready for a fresh coat of paint. Important Details for the Tasker: Handling: The mirrored doors are heavy and fragile; please bring appropriate tools or ensure you can handle them safely. Cleanliness: The room is carpeted. You must bring dust sheets to protect the floor. Tools: You will need your own drills, screwdrivers, filler, spatulas, and sanding equipment.

Unity Place, Greater London

Mon Aug 31 2026

1 day ago

Open

Standard IKEA, ready to order. No customisation, cutting or painting: assemble and fix securely to the wall. The fixing matters most. MASTER BEDROOM: Move the existing chest of drawers to bedroom 2. In its place assemble LASTARE 33JHNZ3 (80cm 4-drawer chest, 80cm frame with doors above, 80cm height extension on top, approx 2360mm). Fix to wall. BEDROOM 3 Assemble and wall-fix LASTARE 33JJML5: three columns 60+60+40, each with a height extension, approx 2360mm. Plus two BILLY bookcases (80cm and 40cm), each with a height extension, on the return wall beside it. These must MATCH: both runs finish level and read as one built-in. The BILLY run continues past the internal corner so its end sits flush with the wardrobe's front face. LIVING ROOM Dismantle two pieces of furniture and a shelf and pack for resale: back the fittings out rather than levering, bag and label per item, wrap the panels. In their place assemble and install BESTA 33JPSZ7: 10 frames (incl. TV bench and a 192cm tall frame), 11 doors on soft-close hinges, 10 shelves, 9 suspension rails for the wall-hung sections. HALLWAY: Two BERGSHULT/GRANHULT wall shelves. About 30 min. WALLS AND FIXINGS - MOST IMPORTANT Plasterboard with metal studs behind. I already have: - Fischer DUOPOWER 6x30 with screws (50) - Fischer DUOPOWER 8x40 with screws (50) - GeeFix heavy-duty cavity fixings (20-25) Use these if suitable, but please tell me what you would add. I know ordinary plugs are not ideal in thin metal studs, so if you would rather bring self-drilling screws, or batten across several studs to hang the BESTA, please do and price it in. I have children aged 3 and 5 and a baby due in December. Every freestanding unit anchored, no exceptions. I would rather overengineer and do it once. POWER Socket already under the TV, extension leads ready. NO ELECTRICIAN NEEDED. CREW AND TIMING: I would rather have more people on site and finish in 2-3 days.

Unity Place, Greater London

Sun Aug 30 2026

1 day ago

Open

Build a bespoke bookshelf wall with tv unit. Wall is approx 7 meters wide. Bottom part needs to be cabinets, top to ceiling bookshelfs and 1 tv section for a wallmount tv. Behind the entire shelving unit needs to be soundproofing material.

Forest Gate, Greater London, E7 9

Sun Aug 30 2026

1 day ago

Open

Browse all tasks

Last updated on 1st Sep 2026

Unlock new income opportunities in London

Explore cooktop installation related jobs and discover your financial opportunities

Type of cooktop installation job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Appliances	£180	£450	£630
Washing Machine Repairs & Installation	£144	£360	£504
Appliance Repair	£200	£500	£700
Appliance Installation	£180	£450	£630
Dishwasher Repair	£190	£475	£665
Oven Repair	£190	£475	£665
Coffee Machine Repairs	£240	£600	£840
Hob Installation	£200	£500	£700
Gas Fitters	£240	£600	£840
Cooker Hood Installation & Repair	£240	£600	£840

*Based on average cooktop installation task prices in London. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

We've got you covered

Whether you’re a posting a task or completing a task, you can do both with the peace of mind that Airtasker is there to support.

Airtasker’s insurance cover