Find a professional built-in wardrobe contractor in Inner South Melbourne

Remove wardrobe and dispose of materials. - Due date: Flexible

Paint 2 x built in wardrobes and interior of wardrobes. Min 3 coats of paint. Paint provided - Due date: Before Wednesday, 14 June 2023

Need built in wardrobe removed from the wall and disposed of. Dimensions: 60x180x245cm There’s a light switch and a ventilation system panel on the side of the wardrobe which will need to be relocated, or disconnected for the time being. I plan to install an IKEA wardrobe after. Located in a 1st floor flat of a walk up complex. Works to be completed on or after 17th April.

I am looking to get this existing built-in wardrobe removed, so that I can install a new BIR in its place. This job would entail: – removing existing BIR (2580x3345mm) – dispose of exisiting BIR A new wardrobe will be installed in its place by someone else. *This task is for the removal and disposal of existing built-in wardrobe. *Please see images of the existing cupboard which will need to be removed. *Please advise of time frame for job completion start - finish Due date: Flexible Please let me know if you require further information. Thank you. - Due date: Flexible ideally before Sunday, 2 April 2023

One long shelf built at he top of the wardrobe with double hanging rail and one single hanging rail. - Due date: 24th March

We need help removing an existing old built in wardrobe from the wall. We have a skip ask no need to physically remove from property. Just move with us to front lawn and dissemble a little so it fits in the skip. Required today if possible as new wardrobe being assembled tomorrow Glen iris near tooronga road. 2.8m x 2.4m x 0.7m wide. Built into the wall. Must take care when removing - Due date: Needs to be done on Sunday, 8 January 2023

i need the removal of two built in wardrobes, and disposal, both 260cm H ( ceiling height) x 175 W and then 56cm D. also need to make good the ceilings - Due date: Before Saturday, 15 October 2022

My daughter’s wardrobe draws and shelf have fallen off the rails. It looks like the supporting frame panels have moved apart and are wider now than the width of the draws themselves.

Need some help removing built in wardrobe so we can sand and polish timber floors below. Will need you to take the scrap timber to the tip for disposal too please. Wardrobe measures approx. 1.5 m wide by 1.2 m deep by 2.1 m tall (guessing) and has some shelves. I believe this wardrobe is original, from the 1940s. Will need to make sure we don't damage the plaster/floors as much as possible.

We have just had new carpet laid in the 2 upstairs bedrooms. They took the doors off for this and now I need them put back up. There are 2 bedroom standard doors and 8 small built In wardrobe doors. I am not sure but they made need a few mm shaved off them for the height of new carpet. - Due date: Flexible

Draws built inside a built-in wardrobe (already have the wardrobe). Prefably 6 draws on each side. Same measurements each side. Flexible on dates.

We have removed some of a fitted wardrobe but need the rest taking out and the plaster work on the ceiling and walls plus the cornicing & picture rail 'made good'. Assume materials cost is additional and budget I have put in is for 1 day labour? (estimate). Please give us a guide on cost for the labour plus materials. - Due date: Flexible

- Demo existing BIRs (pictured) and removal of rubbish - Install new BIRs (with sliding mirror doors) *please note the ceiling cornice around existing robes, possible plaster work to make new BIRs look finished *budget includes removal of existing BIR rubbish and supply of new BIR materials

Built in wardrobe needs repairing, drawers and shelf pieces are fine just the rails for the drawers and cabinet for shelving needs to be repaired and re-attached to unit. Have pictures - Due date: Flexible

I need a builder to install an IKEA Pax Wardrobe. The wardrobe is 2m wide. Dimensions are in the pictures. My Pax wardrobe is custom so the inside is different to the pictures. Updated pictures coming soon. I need someone able to build it and fix it to the wall. Thank you! I appreciate all of your offers!

Width 1450, height 2030. Existing built in 2 door wardrobe (see photo) to be converted into open shelving. Adding 2 additional shelves, removing doors, and an internal board separating wardrobe on left hand side. Each shelf edge to be finished with timber facade. Materials not provided.

Painting the sides of the mirrors of all the wardrobes including the tracks. We have primer and spray paint already.

Fix sagging shelving unit (3.2m long) Install built in 5 shelf unit Install built in 4 drawer 3 shelf unit Will need to cut/modify hanging rail to fit within new shelving units Shelving units purchased. Just need to supply some fitting materials and tools to do the job.

I need a wardrobe fabricated and installed in an existing cavity.

I need a neat, quick working cabinet maker or knowledgeable handy man to reassemble a built in wardrobe we took out of our old house to replace into a new house. It’s a large wardrobe consisting of 6 doors. It was custom made from flexi robes. Possibly the matching desk and shelves to ceiling too. Preferably 2 people to speed up the reassemble. Professionals in the know. Would like job done this week. 3.3m in length 2.8 metres I’m height. Not Bunnings wardrobes- as mentioned, custom Built from Flexi robes. Person may need helper for lift pieces and just he’ll finish job quicker