Find a professional balustrading contractor in South Brisbane

I need a qualified tradesperson to install stainless steel balustrade wiring to 3 sets of stairs, similar to the picture attached ( last picture). I need them on the 3 sets of charcoal stairs in picture. ( first 3 picture s) All material supplied. - Due date: Flexible

I need balustrade and timber threads painted in 3 separate stair cases. I will supply all paint, just need paint brush/ roller and a good work attitude. - Due date: Flexible

Replace/repair timber balustrade on balcony at my home. Timber is rotting away and needs to be fixed. I will supply all materials, just require a carpenter/chippy for Labour. Labour only - Due date: Before Monday, 10 April 2023

I need the new balustrade to be painted 2 coats. Paint will be provided - Due date: Before Friday, 31 March 2023

We are going to have the staircase and balustrade 2 coats of clear varnish including sanding in between - Due date: Flexible

Installation of pool glass balustrade. Approx 19m with two gates - Due date: Before Saturday, 25 February 2023

We are just after a quote if possible, to have our interior balustrade replaced within the next couple of month as we are currently renovating the property (located at Mt Gravatt East). We are not wanting to replace the stairs, just the balustrade/ railing. In terms of the new balustrade, we are looking at the following: - we wish to keep the main posts the same size/style - there is one at the bottom of the stairs (approx 8.7cm length), top of the stairs (approx 8.7cm length) & possibly one required against the wall (thinking half the thickness of the other posts at 4.3cm length). - flat style timber railing top & bottom (basically the same as the current ones that are slightly smaller in width than posts) - stainless steel wire horizontal runners in between posts - timber to be stained/painted white (potentially same as the wall colour which is Lexicon Half in a semi gloss) Rough measurements are just as follows: Post at bottom of stairs is 116cm high Post at top of stairs is 100cm high Distance between bottom post & top post (from outside edge of bottom post to outside edge of top post) is approx 74cm Distance between top wall to outside of top post is 183.50cm Please just let us know if you require any further info to be able to quote :-) - Due date: Flexible

Replace small amount of timber floor panels on deck and replace some timber balustrade on deck - Due date: Before Saturday, 24 December 2022

Approximately 6mts balustrade glass or wooden Supply and install - Due date: Flexible

2 stainless steel handrails need to be welded. 12 welds in total - Due date: Needs to be done on Friday, 23 September 2022

Sand and 2 coat white exterior paint of balustrade. There are approximately 14m of balustrade and a couple of posts per pictures. Can supply paint or if you want to supply that's OK. Please quote and indicate supply of paint or not accordingly. - Due date: Flexible - Due date: Before Friday, 30 September 2022

Internal stairs and balustrade sanded and painted - Due date: Before Saturday, 27 August 2022

Dog bite the bottom of railing needs repair - Due date: Before Tuesday, 26 July 2022

Install glass balustrades - around 6m on the upper balcony - Due date: Flexible

I have 3 tension wires on our deck balustrade that need refitting (pop rivets). Small job - Due date: Flexible

I would like my external metal balustrade repainted in white.

I am wanting a simple wooden gate made for our front patio area to keep the dogs in. Photos and rough plan attached. I’d just like the wooden gate to match the existing balustrade. Also, I’d like to fix up the quick fix job my hubby did by putting in a few posts to join two balustrade panels together - currently held together by electrical ties. Will need to buy a few timber 100 x 100 posts, plus connections. Happy to meet carpenter on-site to inspect the morning of and then go to Bunnings / Finlaysons to purchase panels / rails / posts/ connectors etc.

Have removed Gyprock wall (1meter high wall) from top of stairwell void, and replacing with glass balustrade of similar dimensions. Have glass installation organised, yet need base prepared for installation. needs some of the remaining steel frame removed, and a timber base secured to the floor to attach spigots for glass too. Timber needs to be at least 50mm in height, and 100 mm width. The length of the timber will be 3300mm alongside the stairs and 1000mm at the end of the stairs. I will purchse timber and any hardware required to affix it. Essentially this is a frame for the glass balustrade to be attached to via spigots. - Due date: Flexible

Removing lead paint from external steel balustrade. Balustrade is rusted.

Need to freshen up our deck with a new timber balustrade. And removal of existing iron one. It's about 2.5m x 6.6m.