Find a professional tiler in East Melbourne

Entry way from garage and shed to be tiled. Roughly 6.5m x 2 m has a stairway, several doors, a trough and a water tank. Does not need to be perfect, the spaces are awkward. We have tiles. Room will be cleared of course. Let me know what seems like a reasonable fee.

Approx 8m squared of tiling/grout for a bathroom floor. We have tiles already. Current shower screen will be removed and shower drop will need to be levelled as putting a bath in existing shower position. Old tiles will be removed to the cement sheeting.

Bathroom wall and floor tiling. See photos.

I am looking to replace the decking in our alfresco area with timber-look tiles. The area is approximately 13 square meters, and I need the work to be completed as soon as possible. If you specialize in tiling and have availability, please get in touch at your earliest convenience. Thank you!

I need floor tiling around 60sq m - Due date: Flexible

Hello! We have 27qm of kitchen and living room floor needing to be tiled in our apartment Reno in box hill, concrete slab and using 60 x 30 rectified porcelain terrazzo tiles. We need the job done on 3rd/4th Sept. - Due date: Needs to be done on Saturday, 3 September 2022

Vanity (1800x600) and shower has to be tiled

Hello I urgently need a small chip repaired in a porcelain benchtop Have entered 100 but can discuss once you have seen it.

Cut 60mm whole in porcelain stone slab

My stone splashback got burnt. I need someone to sand and polish or any suitable solution.

Laying of porcelain tiles under stairway and along laundry wall-floor to ceiling. Approx 8m2 total

Outdoor landing 3m x 1m plus riser

I need assistance with repairing a minor crack in my bathroom sink. Since I have to return the apartment to the agent, I would like the fix to be unnoticeable. - Due date: Before Wednesday, 20 Dec 2024

I recently bought a new table. However the gap between porcelain table top and base is not sealed properly and is showing a black edge. I need someone with experience fixing up furniture to touch it up and seal the gap properly for me. Price is negotiable.

Need to do porcelain tile flooring for a residential house wig large floor areas. Old floor boards need to be removed. If interested, please text me. - Due date: Flexible

I need around 40 porcelain tiles (20mm thick), cut. I am laying them but am wanting to have them cut. They are being laid on pod pavers from National Tiles - Due date: Flexible

Looking for an experienced porcelain installer to install two projects: - kitchen benches - island benches - splashback All cut outs are done prior, no cut out is required. All pieces are fabricated already, ready for installation

re-grout shower area and bathroom - Due date: Flexible

I have a small L-shaped kitchen and would like to install a new acrylic splashback over the existing one, without removing it. Small L-shaped kitchen Existing splashback is orange-toned acrylic I do NOT want the existing acrylic removed, as I want to avoid any potential wall damage Looking to install a new acrylic splashback over the existing acrylic Happy for the installer to: - supply the acrylic material, or - install using acrylic panels that I purchase myself

Laundry Splashback Tiling Looking for an experienced tiler to complete a small laundry splashback. Workspace: - Tile one wall: 190cm (W) x 70cm (H) - Tile one side panel: 60cm (W) x 16cm (H) - Cut neatly around 1 x power point - Tiles supplied (long rectangular subway-style tiles) Layout: - Preference for a clean, straight layout (vertical stack or neat subway pattern) - Looking for good alignment and consistent spacing, especially given tile style What’s required: - Supply of adhesive, grout, spacers, etc. - All tools - Clean finish and tidy edges Site condition: - Existing wall has been patched/painted — may require minor prep before tiling - Easy access, laundry benchtop already installed Timing: - Flexible, but ideally completed soon Please include: - Confirmation of materials you’ll supply Looking for someone reliable who takes pride in a neat, professional finish.

I’m looking for calacutta gold overlay/resurfacing to go on top of existing stone for a 2500mm x 750mm bench (existing black stone) and continue to cover existing subway tile Splashback . 40mm down turn on bench

I have demolished existing bathroom and want to renovate them. I will require Tiling for : 2 bathrooms, walls and floor (half a wall for each of the bathrooms will be kitkat tiles) 1 PDR room, wall tiles only halfway Laundry, only for 3 walls and half way Kitchen splash-back Total Tile area floor + walls is about 55-60sqm Tiles to be used are 600x600, same tiles for wall and floors, except the 2 half wall kitkat tile features There will be: 2 niches 1 in each shower 3 windows to be tiled. 2 Door jamb tiled Showers to be screeded and channel drain Please provide waterproofing as a separate quote

We have a small kitchen splashback we needed tiled. We have white subway tiles, no grout. There are two power points on the wall to cut the tiles around. Photos attached! We would love someone asap!

I need some tiling done for a bathroom splash back The space is 900mm x 490mm I have ceramic tiles that are 300 x 600 x 9mm

Remove existing red glass splashback with care and disposal. Joinery is remaining so need precision when cutting silicon from under overheads and bench top. Make good masonry wall behind. Prepare wall for tiling. Tiles to be provided and tiled to under cornice on window side. Height from benchtop to under cornice is 1520mm. Overall measurements of splashback is: 1. 840H x 780W 2. 645H x 2790W (with window cut out) 3. 645H x 2230W. See attached images. Thanks

My stone splashback got burnt. I need someone to sand and polish or any suitable solution.

I need a handyman or tiler experienced with silicone sealing to fix a gap between a new quartz benchtop and the mirror splashback. Gap details: • Length: 1.8 metres • Width: approx. 7–8 mm • Depth: approx. 20 mm • Bottom area is hollow (not supported) Task required: • Clean the area • Fill and seal the gap neatly (white finish preferred) • Leave a smooth, straight professional-looking line Possible method (for example only): • Using a backer rod to support the gap, then sealing with white neutral-cure silicone suitable for stone + mirror But I am open to any professional solution you recommend that achieves a clean and durable finish. Please include in your quote: • Labour + material

A total of 24.5 m² of tiling done 4.2 m² of kitchen splash back with white subway tiles 14.5 m² of bathroom wall tiles, all the same, including the shower behind the toilet and bath area and a small splash back above the basin. It is all being appropriately waterproofed 6 m² of bathroom floor, including one drain in the center of the floor and a tile over shower base There is an electric tile heating mat installed that will need to be tiled over. All the surfaces have been prepared with tile underlay, and waterproofing membrane where necessary All tiles will be supplied I would like all of the tile adhesive and grout to be supplied by you

Tiling kitchen splash back. Old tiles have been removed and what is required is to apply, tiles and grout. We have the tiles, grout and tile adhesive ready to go. One wall may require packing in a certain section. Sections are Approx Length 268cm x width 75cm wall 1 272cm x75cm wall 2 (H38cm under window for approx 194cm)

We just painted our flashback, need someone to take off existing silicone and re caulk. It’s a small surface area.

We’d like to replace our existing kitchen splashback (as pictured) with a new glass splashback. We’re interested in options for colours and finishes, ideally something modern and easy to clean. Scope of work: - Remove old splashback (can be disposed of onsite) - Install new glass splashback in the following areas: • Behind cooktop: 175cm x 70cm • Small side section: 25cm x 70cm • Behind sink (RH side): 140cm x 25cm (we’d like the height increased from current) • Under/behind range hood: approx. 20–30cm x 60cm - Replace 2 x powerpoints (current ones have faded from sunlight) Notes: - There are 2 existing powerpoints within the splashback area. - We’d like recommendations on glass colour/finish options. - Must be neat, durable and well-sealed. Please provide a quote including materials, labour, and an indication of turnaround time.

Hi, I am needing a kitchen splash back to be tiled, the area is just over 4 square metres, the square tiles are 118 x 118 and we are wanting a simple stack placement. We have the tiles ready to use, our benchtop will be installed this Friday 8/8 and I would like tiling to be done on Wednesday 1 August. Thanks Annette

Kitchen splashback tiling Old tiles already removed Approximately 4.3sq metres of 600 x 600 mm tiles Ideally done next Wed 18/6 Also will need grouting and silicone

We want to replace our kitchen benchtop; to do so we need the countertop and splashback removed. We have a L-shaped laminate countertop, with the sink and gas cooktop attached. The splashback is tiles cemented onto the wall. Rubbish don't need to be taken care of. Hiring experienced handymen only. Conditions are negotiable.

Tile Kitchen Splash back. Around window and 4 power points.

Handmade looking gloss tiles for a .65 x 2.9 m splashback - need an experienced and dedicated to detail tiler. I have the tiles and the grout. There is also a repair to the bathroom --the tile drain insert has come away and needs fixing back in

Job 1: 1. remove the current glass splashback (green area in the kitchen) 2. install new tiles (900x300) - about 15-18 pieces Job 2: 1. remove two~three cracked tiles in bathroom 2. tiling the supplied new one for the cracked one Expectation: 1. Tiling all the above with quality including surface preparation, grouting and all material (only tiles are provided) 2. Keep working area as clean as possible 3. Must to have years of tiling experience with good review

Need tile my laundry splashback. Only tiles will be supplied. Remaining material needs to provided by Airtasker to complete the job. Height is around 580mm and length are 580mm, 1200mm, 1500mm and 520mm

Main Bathroom: Remove old shower floor grout Remove old grout/silicone wall-floor joints Clean and dry joints Regrout shower floor with polymer fortified mould resistant flexgrout Install new silicone wall-floor joints Apply penetrating sealer to grout in Main-Bathroom shower Remove old silicone from inside frameless/semi frameless shower screen Clean and dry under frame/glass Check over shower screen frame for holes/gaps and apply silicone Install new silicone to inside of shower screen Add Ardex Grout Booster to mix, a synthetic polymer grout additive specially formulated to improve adhesion strength, flexibility and abrasion resistance.

Need the tiles replaced along the bathtub lining, only need a few of them replaced, then grout and seal

Replace 1 x bathroom tile. Have a new tile. Clean base so level, glue and grout.

Bathroom Shower Wall Panel Install Looking for someone to install a waterproof shower wall panel over the existing tiles around my bath/shower. Tiles are worn and cracked but I don’t want them removed. I’m happy to supply the wall panel sheets myself. Job will mainly be prep, install panels over tiles, and seal properly around taps, bath edge and corners so it’s fully watertight. Just want it neat, tidy and to stop further water issues.

Bathroom walls have been freshly plastered and I need a tiler to come tile the bathroom walls and flooring, including waterproofing.

Need bathroom tiles regrout and waterproof sealant removed and re sealed

Fix 6x pencil edge mirrors to bathroom tiles. Required both silicone/glue and double sided tape as per instructions provided with mirrors.

Need a reliable, punctual all-round handyman who can come and finish off a small job. Tiles are down (3sqm), but they need grouting. Toilet to be reinstalled and skirtings reattached. Job's been dragging on and we just need it finished. Photo attached.

Kitchen and shower re-caulking plus some tile repair in shower.

lay tiles with the same color grout as the existing one. The tiles supplied.

Re-grout walk-in shower bathroom tiles. Last regrouted in April 2024. Airtasker to remove current grout and provide all materials needed. Size is approx 1.75M X 1M.

Looking for someone experienced to remove and replace the mouldy grout between shower box panels, bathroom wall and floor tiles. It’s a single shower box. Please bring your own tools and materials. Need mould resistant grout. Must leave the area clean and tidy after the job.

Task involves: - Removing a cracked tile in the bathroom without damaging adjacent tiles, walls and door frames; - Removing an unbroken tile from the fridge area without damaging the tile itself, adjacent tiles and walls; - Using the unbroken tile taken from the fridge area to replace the cracked tile in the bathroom, including all necessary grouting; and - Installing a new tile, which will be provided, to replace the one taken from the fridge area, including all necessary grouting. In summary, since I could not get a new tile that matches the cracked tile in the bathroom, I would like to use one from the fridge area for the repair. The one taken from the fridge area will be replaced with a new tile of slightly different colour, but this is okay since it will be hidden underneath the fridge. Tiles are 400mm x 400mm. The cracked tile is up against a wall and is 400mm x 300mm. Please refer to photos of the cracked tile.

Single large bathroom tile to be laid over an electrical heating element after an electrical repair. Old tile removed, new tile already purchased, no cutting required. Grout and adhesive must be suitable for heated floor and match other grout. Area clean up and debris removal required after job completion (shouldn’t be much as old tile material removed). Easy access to bathroom. Must be careful not to harm the heating element.

Tile has lifted from the shower base, will need to carefully remove the tile, repair the waterproof below, re-glue, re-grout and silicone around the base of the shower. Shower is tiled floor to wall.

bathroom door can't close properly.,and grouting

Replace the sealing on the bathroom tiles

I need someone to help me finding a good solution to fix the broken tile and floor board. I’ve got spare tiles and floor boards if needed. I’m not sure what happens to them but the floor boards look like water damage and the tile also show slightly higher moisture level than other tiles. So I think there were some water in there previously. Also, between the transition strip and the door frame, there is a gap, I want to get this filled as well so water doesn’t accidentally go in. I think the transition strip may also need to be replaced as part of it. I’m happy to hear all proposals

I would like to replace the wall tiles in existing bathroom.

Waterproofing really, can start work anytime from today. 600x300mm, Floor & wall tiling,Tile to the ceiling 2.4m, one niche.