Find a professional downpipe contractor in North West Melbourne

I need to have the gutter and downpipe of my house replaced. Looking for a reliable and experienced tradesperson to visit the property, assess the work needed, and provide a quote. The quote should include both materials and labour A site visit is preferred to get an accurate understanding of the scope Flexible with timing for inspection and job scheduling Please reach out if you're interested or need further details. Happy to discuss availability for the site visit.

Looking for a roof plumber to install flashings, side cappings, guttering, and a small downpipe on our newly built verandah. The frame and Laserlite roof are already completed — this task is for finishing off the roofing edges and water management. ⸻ Details: • Verandah size: 4.5m wide x 2.5m deep • Roofing: Laserlite sheets already installed Materials supplied by us: • Rear flashings to seal Laserlite roof to house fascia (there are 3 seperate flashings due to a small section of verandah roof running past the eave - see photo) all cut to size and rough length • Capping for exposed side edge (cut to size) • Gutter for front edge and brackets (cut to size) • Pop fitting You’ll need to supply: • Short section of 90mm downpipe (approx. 1–1.2m) to connect gutter to nearby water tank • Fixings, sealant, and tools Scope of work: • Install rear flashings between verandah and house fascia • Fit side capping neatly along exposed edge of roof • Install front gutter with pop hole (next to tank side) • Fit short downpipe section into water tank inlet ⸻ Timing: ASAP ⸻ Please only apply if you have experience with roofing/flashings/guttering. Photos of similar work appreciated. Let me know if you have any questions or need to inspect first.

I want to connect downpipes from a pergola into the existing downpipes from the house. The outlet from the pergola is round. The existing downpipes on the house are square. Looking for a neat solution, either round to square then into existing downpipes. Or round to round (and replacing the existing square downpipe). Photo is the existing pipe which I would like to connect into (or replace)

We need to reposition the downpipe to allow for the installation of a window roller shutter. Please see the attached photos for reference. Only the downpipe circled in red needs to be moved. It can be detached from the straight pipeline (in blue) currently connected to the drain. The replacement downpipe must be Colorbond in the color Monument.

Looking for a licensed plumber to inspect and clear a blocked downpipe connected to rainwater storage tanks. The downpipes appear to be clogged and require vacuuming or flushing to remove debris/material causing the blockage. Details: • Property has multiple downpipes linked to rainwater tanks. • Suspected blockage needs professional equipment to vacuum out the materials. • Visual inspection and confirmation of blockage is part of the job. • Access is clear and photos are attached for reference. • Need someone with the right tools and experience in handling downpipe blockages.

Hi , I need a rusted section of guttering replaced. I also have a downpipe in the middle of a window due to renovations. I need to either move the downpipe a meter left or right of where it is, or find an alternative downpipe solution. Open to suggestions to solve the downpipe problem. See pic below. Blue = rusted, needs replacing Yellow = moving all the downpipe a meter to the left Red = Moving downpipe but keeping bottom bit where it is (not sure if possible) Thanks, happy to supply any more information if required. Cheers James

Need to reconnect a rectangular downpipe that has separated from the drain fitting over time.

I would like someone to install a few modifications to my car including: 1) aluminium charge pipe 2) high-flow catted downpipe I have already purchased these parts. I'm happy to drop it off at a place nearby. Thank you

Old downpipe has rusted through at bend and does not appear to be connected to stormwater. Looking to sell house so just want to make functional.

Install downpipe gutter and connect to ground drainage Must match other downpipes colour

one cracked down pipe at the bottom & another downpipe broken at bottom a lot more at bottom with hole. may also need to unblock a few downpipes also -

down pipe replacement. not sure if its just the elbow that needs replacing or the entire down pipe offsets, so will need expert advice. Post your quote.

Gutter leading into water tanks seem blocked causing overflowing water in heavy rain

There leaking in Some down pipes and need to be fixed as u can seen in the pics

General carpentry, plumbing and hand work.

I have two gutter down pipes that go straight to the ground that I need connected to the stormwater.

Kids have put some rocks down the pipe I took as much as I could reach but want to ensure no more is down there Doesn’t seem blocked anymore but want to be sure

Need a skilled tradesperson to replace a damaged 100x50mm rectangular downpipe at my property in Oak Park. Job involves removing the old pipe, installing a new one, and ensuring watertight and secure connections. Color match preferred. Please bring your own tools and let me know if you can supply materials. **Location:** Oak Park **Budget:** [200]

See photo Need this downpipe replaced with a larger one to handle more rainfall Plz quote

See photo Overflowing and into pergola entertaining area I think I'd need downpipe replaced with a bigger one Two gutter sections One approx 6m The other approx 2.7m Plz estimate