A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in Gold Coast

Fill in a short form and get free quotes for local hot water system contractors in Gold Coast

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Gold Coast

Thanks to Jesse for his good service

Replace 80 L hot water tank in a garage

$1,200

Amazing work by Matt who has been working all afternoon replacing my hot water system! He was very polite and replied to my messages straight away and even did the job on the same day! Thanks so much for your hard work.

Install new 50l hot water tank

$1,400

Great service!!!

Not hot water in showers

$200

Neat plumbing job 💯

Plumber to hook up hot water system

$100

Fair price, friendly, reliable

Remove a solar hot water tank from the roof

$80

AMAZING service! 10/10 Definitely use again

Plumber for a little leak in copper pipe hot water system

$100

What's the average cost of a hot water system installer in Gold Coast

$120 - $330

low

$120

median

$180

high

$330

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Gold Coast

based on 56 reviews

4.91

54
0
1
1
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

60+

Tasks successfully completed

2

Average amount of offers per task

19

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Gold Coast

Need a plumber to inspect my new hot water tank

$100

Southport QLD, Australia

11th Jul 2025

I have installed a new hot water tank but not getting the same intensity and force if hot water need a plumber to come and inspect this today

Excellent t service

Install Gas Hot Water System on 2024 Hardkorr Xplorer Camper Trailer

$1,000

Pimpama QLD, Australia

11th Jul 2025

💧 Install Gas Hot Water System on 2024 Hardkorr Xplorer Camper Trailer Description: Looking for a licensed gas fitter or qualified tradesperson to install a gas hot water system on my 2024 Hardkorr Xplorer 2.2 camper trailer, currently housed in Pimpama (Gold Coast). I can transport the trailer locally if required. I'm considering installing a gas-only hot water system (e.g. Truma UltraRapid), but I haven’t purchased the unit yet. Open to recommendations on the most practical and compliant solution for this style of camper setup. Scope of Work Includes: Installation of a gas-only hot water system (unit not yet purchased – advice welcome) Connection to the kitchen sink and/or external shower outlet Gas connection (using existing bayonet or installing new, depending on your recommendation) Secure mounting of unit (preferred location: driver’s side near the kitchen setup – see photo) All work must comply with QLD gas and plumbing safety regulations System testing and brief walk-through on operation upon completion Photo Provided: The attached image shows the driver’s side storage and kitchen area, where I’m hoping to have the system mounted. Open to your advice on the best location for both function and compliance. Requirements: Must be a licensed gas fitter (required for compliance and certification) Experience with camper trailer or caravan installs preferred Must provide tax invoice and Gas System Compliance Certificate Own tools and equipment Flexible with timing – ideally completed in the next 2–3 weeks Budget: Open to fair and reasonable offers – please include all labour, materials (if supplying), travel, and compliance in your quote. Happy to supply more photos or answer any questions. Thanks!

Check my hot water system - there is barely any coming out

$100

Tugun QLD 4224, Australia

4th Jul 2025

Our hot water system seems to not be working at all and barely any hot water is coming out

I can’t thank Angie’s partner enough for the incredible job done on our hot water system. What started as a simple check-up turned into a full replacement — all on a Friday evening! It was a big job, but it was handled with absolute professionalism and care. Everything was executed perfectly, and the quality of work was outstanding. So grateful for the quick response and top-notch service. Highly recommend!

Fix leak from hot water tank; check taps needing new washers

$100

Australia Fair, QLD

30th Jun 2025

Hot water tank leaking Check taps

Remove temperature regulator from hot water cylinder

$200

Tugun QLD, Australia

25th Jun 2025

Had a new hot water cylinder installed last week, replacing an old one which didn't have the regulator. We have a very old house with very tiny pipes which means absolutely no water pressure for showers and it's a disaster. Need the regulator removed so its just cold water in and hot (75 degrees) water out to the house. Need complete asap.

Great guy, fast, prompt and complete professionally.

Need to move a hot water taken from inside a apartment to out side

$350

Surfers Paradise QLD, Australia

14th Jun 2025

I need to get a hot water tank moved on this bottom level apartment from inside the bathroom and we need to reposition it on the opposite side of the wall so we can have a full vanity where the hot water tank used to be in this ground level apartment

Hot Water System electrical problem

$500

Coombabah QLD, Australia

12th Jun 2025

No hot water since Monday night. Switch in Mains Box on, but has tripped a couple of times. Hot Water System not leaking so a plumber has decided it must be electrical. Faulty heating element?Thermostat? Faulty main box switch? No idea just need a quote to give me a rough idea. Pensioner discount if available please!

No hot water. Bryce was great, through his investigation he discovered that the HWS was fine and that the problem was a faulty meter box. He was friendly, professional and courteous. I wouldn't hesitate to call on him for all future electrical work. I would recommend him to anyone needing a good electrician. Thanks Bryce!

Help with Electric Instant Hot Water Unit

$80

Coolangatta QLD, Australia

10th Jun 2025

We have a Stiebel Eltron Electronic comfort hot water service. It can take up to five minutes to get hot, then if you turn it off, it immediately goes cold again and can take the same amount of time to heat up. Not sure if we need a plumber or an electrician to diagnose and fix the issue.

Plumber, move the hot water system

$300

Surfers Paradise QLD 4217, Australia

31st May 2025

Looking for a plumber or experienced handyman who can disconnect/remove a hot water system, adjust pipework, and install a bathroom vanity (already purchased). Open to quotes – budget is flexible depending on experience

Hot Water System

$100

Tamborine QLD, Australia

20th May 2025

Looking for supply and install of a hot water system in Tamborine (not Tamborine mountain) Would like the size to be suitable for a family of 6. Single story home Currently using a solar hot water system but have had problems due to its age so looking to revert to an electric hot water system. Prior to the solar hot water being installed, electric hot water used so a concrete pad is available for the new electric hot water system. Some piping from the previous set up can also be seen. Please provide quote and when you are available, would prefer asap but not urgent. Thanks

Free hot water tank for parts or scrap

$5

Robina QLD 4226, Australia

20th May 2025

Free, parts or scrap. Take away.

Job done really well

Hot water system

$5

Gold Coast QLD 4223, Australia

17th May 2025

Hot water system Washing machine fitted Outdoor hot water

Install hot water system

$400

Mermaid Beach, Queensland

16th May 2025

I have a 50L hot water system in ground level unit that needs replacing due to leak. Will supply hot water system.

Plumber to move a hot water pipe

$200

Hope Island QLD, Australia

4th May 2025

Need to reroute a hot water pipe in garage. Will to add some length in doing so

2 x Showers (increase water pressure, adjust hot water temperature)

$150

Coomera QLD, Australia

27th Apr 2025

Water pressure on both my showers are low. Also the hot water change is too extreme, it goes from cold to extremely hot (nothing in between).

Chad got the job done with no fuss, and talked me through step by step what wasn't working and why as he fixed.

A plumber supply and fit new hot water system

$1,500

Broadbeach Waters QLD 4218, Australia

19th Apr 2025

remove the old and fit a new hotwater solar / electricity system (plumber to supply the new hotwater system 300 liter + )

Looking for a plumber or handyman to fix a leaking hot water tap.

$150

Surfers Paradise QLD, Australia

12th Apr 2025

The laundry tap setup. The hot water tap (on the right in the photo) is leaking from around the base of its handle/screw cap. Even when turned off tightly, a slow drip of water continues to come out. This suggests the internal washer or valve isn’t sealing completely. Additionally, water is seeping from the screw cap area, indicating that part of the tap assembly may need new sealing or tightening. Hot water tap handle area (needs replacement). The handle of the hot water tap is in poor condition (loose or broken), which is why it needs replacing. A new handle matching standard laundry taps should be supplied and fitted. Replacing the handle will ensure the tap can be turned on/off if needed in the future and will provide a better seal when turned off. A proper handle will also make it easier to operate the tap and ensure a tight shutoff once the internal issue is fixed. Task Requirements • Fix the Leak: Repair the tap assembly so that no water leaks out. This may involve replacing the internal washer/O-ring or fully capping the line to stop water flow. • New Tap Handle: Supply and install a new hot water tap handle (standard size) to replace the old one. The handle should fit the existing tap valve and allow the tap to be turned completely off. Additional Information • Location: Surfers Paradise, QLD. Please only offer if you can travel to this area. • Scheduling: must be done on the afternoon of Sunday 13 April. • Preparation: Please bring any necessary tools and parts (new tap handle, cap/stopper for the hot water line, washers, plumbing tape, etc.) to complete the job. • Experience: This is a straightforward fix for someone with plumbing experience.

Great experience—on time, friendly, and clearly knew what he was doing. Would happily recommend and use again.

Need to stop hot water coming into machine seal the hot water inlet

$100

Carrara QLD 4211, Australië

1st Apr 2025

Hit water inlet needs to be sealed

Fantastic job done ! Quick and proficient.. great communication and friendly approach defentialy recommend !

Install a hot water system

$1,100

Paradise Waters QLD 4217, Australia

25th Mar 2025

Need to replace 80L hot water system. Old system need to be disconnected and new system installed. Looking for Rheem, Dux or Vulcan hot water system. Please see attached photos

Hot water system

$100

Varsity Lakes QLD, Australia

10th Mar 2025

Hot water system has stopped heating . Looking for a Plummer with experience on hot water systems to check it out and provide a quote .