Find an experienced fence painter in WA

2 coats required, one side of fence only. Some plants to work around – not many Paint will be supplied You will need to provide any other equipment (paint sprayer)

2 metal side gates painted

Painting colorbond fence with bore water stain.

I need one panel and retaining plinth, as well as some retaining plinth on another panel painted Monument. Would need Tasker to supply the paint and any other materials and ensure all prep work is done. Ideally need this completed on a Monday.

Paint concrete floor of verandah (600 x 200) and bathroom 340 x 260. Paint colour bond fence (8 panels, each 240)

- Supply and install verandah fence on far end only between wall on left hand side and post on right hand side. - Does not need painting but in state/prepped for painting in future. Note: external wall on left hand side is asbestos, floor is concrete. Need to discuss best way to fix/attach fence. To be similar to those pictured. Location: Palmyra, Perth 6157

Paint this fence. An undercoat has been applied but needs to be finished with 2 coats of cream. I have a patch in photo of the colour it will be. Paint will be provided but not paint brushes etc

Painting of horse post and rail fences with sump oil. All equipment provided. Gardening also once this is completed. Min 6 hours. Could be done as a couple/pair... 400m of fence Start time 9am

Requesting spray paint of my residential fence line. Looking for a monument gray. It's super6 or Hardie, about 100m linear meters of fence line, 6ft tall, mainly unobstructed. 2 coats, I can supply paint. Will require you to have suitable sprayer & equipment.

12m length standard 1.8H Hardifence respray needed Small quick spray job NightSky colour

Prepare and paint balcony frame and rails plus 2 small gates

To lightly sand and repaint front wood fence inside and out - paint ,sand paper and tape provided

Require someone to spray paint fence a monument colour to align with the Colorbond colour. Roughly 10metres long

Oil both sides of a Jarrah timber fence. I’d like some advice on best type of oil to use to protect and enhance the look. The fence is 12.5m long. There is a section of hedge which will make about half of one side a little tricky to access.. but it’ll be fine.

Wanting to get my fence panels painted not the metal frames. May need a light sand and two coats of paint. I have already purchased the paint.

Hi, I need 2 X colour bond fences either painted or sprayed in monument. 26.4m - left boundary 14.08m - back boundary Thanks

Approx 10m fence badly in need of sanding back and resealing

Repaint existing fibre cement fence. Dulux Paint supplied. Will also need to patch and sand a couple of hairline cracks. Bottom missing panels will be getting replaced before painting Need doing by asap before pool gets filled with water next week so easier to access.

Fence for a new property , block size 15mts x 30 mts

Sand, clean prep timber features( Wooden fences, panels and bench, door) and apply two coats of long lasting protector oil