Find and experienced emergency locksmith near you

Lock for automatic door has got the loosen key .

Need a locksmith or handy person to open a small outdoor metal shed after we lost the key. Located in Bonbeach (inside the caravan park). Easy access. Standard metal garden shed with simple handle lock (photos attached). Looking for someone who can: * Open the shed without damaging it if possible * Ideally help with replacement lock / new keys if needed Flexible on timing but would love it done ASAP. Please send through your quote and availability.

I tried to program a new gate fob and must've done something to the system. The other key fob can only open/close if you hold it. Needing it fixed along with a new fob added

I have a stick car key replacement which is currently uncoded as I had it taken from the ex and broken but still have the stick that turns the car on but doesn’t start the engine I move out on Monday and have to have the car gone

Need car key for 2014 Mitusubhise triton

I need to move my old car but I lost the key for it. 2014 i30 I just need a basic key to turn on and move parking. Because car is damaged so will likely dispose of soon. What is the cheapest price I can get this done please send offer.

2007 vze keys ive lost my keys

Audi Q3 - 2018 Key to ignition

Toyota corolla 2004 key replacement

Hi, I just bought a 2009 Holden Commodore Ute from auction and it came without a key. I need a quote for a new key, including cutting and programming. Please let me know the price and availability. Thanks

I need a replacement car key cut

Lost car keys need replacement Price negotiable

Locked my keys in my car, Hyundai accent 2000 manual key no central locking. Old fashioned. Need help asap

Car key cut hsv 08 programmed flip key Must supply

Like an idiot I locked my keys in an old Mazda truck. I recon a coat hanger should do it! Please help asap. Thanks I’m parked outside the Beresford on Bourke in case my battery dies…

The lock to the side compartment on my caravan isn’t working; I think it may need replacing as the key does not turn.

I’ve lost my keys and need a new one programming for a ford fiesta 2010.

Hi, I need the current passage knob sets replaced with entrance knob sets on 4 internal bedroom doors. Photos attached showing exactly what’s there now – (no major door prep expected, but please confirm from the pics). Key details: Two of the doors belong to the same bedroom → those two locks must be keyed alike (same key works both). The other two doors should have their own keys. Happy for you to supply Brava or Carbine entrance sets (or any good-quality equivalent) and include the parts in your quote – I’m open to whatever brand you recommend as long as it’s reliable and good value. Looking for the most cost-effective quote from someone who’s done this exact job many times. Please include a quick breakdown (labour + parts if you’re supplying) in your offer. Happy to be flexible on day/time. House is in North-East Werribee , easy street parking. Thanks – Happy to clarify any questions and looking forward to your offers!

Keys are locked inside Renault Scenic and do not have spare set.

Hi guys, I have a few doors that need new locks installed as they are getting flimsy. Please ask any questions

2x door locks come loose ( displaced)and garage door making beep sound

hi got this wonderful door and need someone to set up with internet as iam struggling to do so. can be done remotely if someone guides or can do in person in wendouree vic

Need to fix the lock as it is not locking properly

Refit loose Auslock sliding door handle onto aluminium sliding door. Lock is working fine but handle has come off and needs to be fitted back securely. Photos attached.

I need a handyman or locksmith to replace an existing lever handle and deadbolt on a timber entrance door with a new Smart Keypad Lock (hardware provided). Scope of work includes: Removal: Remove the existing silver lever handle and the deadbolt above it. Installation: Install the new Smart Lock system (vertical keypad style). Strike Plate Fix: The current door bolt/latch is a bit "light" and doesn't align perfectly. You will likely need to reposition or slightly mortise the strike plate on the door frame so the new lock engages securely and smoothly. Testing: Ensure the door locks and unlocks without needing to pull or push the door forcefully. Materials: I have the new Smart Lock set and the manual (as shown in photos). You will need: Your own tools (drill, bits, wood chisel, and potentially longer security screws for the strike plate). Photos attached: Current door hardware (Red door). Existing strike plate and frame. New hardware in box.

The deadlock mechanism isn’t working. The actual metal part that goes into the wall has gotten stuck inside and is not releasing.

Slide door needs fixing, it doesn't latch properly to the other door.

My rental has been broken in. Need door and locked fixed so it can be returned to the owner

Security door closer needs replacement, lock needs attention as it currently does not snib the lock.

There is a letter box which has a lock mechanism and it needs to be fixed. So lock works correctly.

Front door latch is very hard to open from inside. Seems to get stuck unless I manually press it in a bit with a screwdriver or my finger (if door is open). Fine to open from outside with key.

I’ve partially installed a Lockwood deadlock on my front door but need someone experienced with door locks/deadlatches to properly finish and align it. Current issue is the key will not release/remove properly once turned, which makes me think either: the tailpiece/cam alignment is slightly off, the lock body isn’t seated correctly, or the cylinder/turn assembly needs adjustment. Most of the install is already done. I just need someone who understands these locks to: inspect the fitment, align and adjust the mechanism, ensure smooth locking/unlocking, make sure the key removes correctly in locked/unlocked positions, and finish the install neatly. May require: minor adjustment/trimming, repositioning, checking preload/alignment on the cam assembly, and ensuring latch/deadbolt travel is smooth. Please only respond if you have experience fitting Lockwood/Whitco style deadlocks.

I would like someone to fix this one, so called locksmith and they ended up breaking the door now needing to install new one and fix this hole.

We have a troublesome door to an upstairs balcony that needs repair. The lock and now spindle are not turning at all. We tried removing the handle and still can’t turn the handle. Need a locksmith, carpenter or handyman to help me firstly open but ideally also diagnose and fix the door issues because this has happened a few times already before. See attached photos for the mechanism. to access the outside, if we can’t get the door open, you will need a ladder to get onto the balcony. It’s probably about 2.5 off the ground to the balcony, fairly straightforward to access with a ladder but we don’t have one here unfortunately. So please bring a ladder just in case. If it needs new hardware please let me know. I think it’s probably an alignment issue. We are selling the house, ideally today but any time before Wednesday is fine - Wednesday is the next inspection.

I have an internal door handle (privacy lever with push button) that isn’t working properly. Issue: The handle is slightly sagging downward (not sitting level) The push-button lock only works when the handle is perfectly aligned, otherwise it won’t engage Likely cause is loose internal screws or worn mechanism What needs to be done: Remove handle and cover plate (concealed fix lever set) Inspect and tighten internal mounting screws Realign handle so it sits level Ensure the spring return is working correctly Test and fix push-button lock so it engages properly when the door is closed If the mechanism is faulty, advise if replacement is needed (and ideally install if I approve) Tools required: Basic hand tools (Allen keys, screwdriver set, something to fit in the hole to open the casing with) Experience with door handles / lock mechanisms Location: Elizabeth bay Parking: onsite guest spaces in parking garage (for vehicles under 2 metres) Timing: later in May, likely May 20 or 21 Experience required: Must have experience installing or repairing door handles/locks Familiar with concealed-fix lever handles General handyman or locksmith experience preferred Notes: This is a standard internal door (not a front/security door) I have a replacement door handle if this one is beyond repair

Need my front screen door lock fixed. Can’t lock it now

A lock on a back French door is very difficult to turn and lock.

I need the lock for my back security door fixed. The bolt trigger isn’t retracting enough to signal release the bolt to slide in. I’d also like a sensor deadbolt/code security lock to replace the existing mechanism on my side gate. Just the ones you can buy from Bunnings. Price excludes materials.

Door lock missing. Old heritage house. Suggestions for a quick fix welcome. Already has lock up top

Front door Lock is loose & doesn’t deadlock with the key.