Book a professional tv mounting service in Plumpton VIC

I have a new flat TV mount bracket set. There are existing holes on the lounge wall but this bracket doesnt fit the hole. I Need someone to drill new holes and assist in mounting the TV.

Need assistance mounting 2x TVs on the wall. House located in Deanside Brackets will need to be provided

Licensed electrician required to remove a wall-mounted TV from a bedroom and reinstall it in the living room on a different wall. A new power point and a free-to-air TV antenna point are to be installed behind the TV, with all cabling concealed so no wiring is visible. The house is a 2019 build with standard plasterboard walls on studs. Up to four additional general power points are required at low wall height, including two in the kitchen and two in the main living area (away from the TV). Wall patching is to be included where required. All installations to be tested on completion. All work must comply with Australian Standards, with a Certificate of Electrical Safety provided if required. *Please note, Job not required until March . Please quote and confirm availability for this month.

Mount tv on wall all brackets provided and a light feature to be hung but I have no tools. Jbox in ceiling

Hi, I need someone to supply a wall mount for my 55 inch and install it

Tv wall mount Have a mounting available

Task Summary: Custom TV Feature Wall & Framing ​Dimensions: 399cm (W) x 189cm (H) x 35cm (D). ​The Task: Build a 3D timber stud frame within the TV cavity and clad it with slatted acoustic panels. The frame must be built to a specific depth so that the finished panels sit perfectly flush with the existing 35cm deep shelving. ​Key Requirements: ​Framing: Construct a structural timber frame (bump-out) to bridge the depth gap. ​Cladding: Install slatted acoustic panels edge-to-edge across the 4m width. ​Mounting: Securely mount a TV and Sonos Beam Gen 2 through the panels into the frame. ​Cabling: Conceal all power and HDMI cables within the new wall cavity. ​Materials: I have all materials already on-site (Timber, SpecRite Slatted Panels, adhesive, and fixings). ​Tools: Please bring your own tools (saw, drill, level, and stud finder).

1. Need to mount a 86" in living room- must bring your bracket that is appropriate to carry at least 100inch for future 2. In the place where you mount 86" already had a 52 inch that i have already unplugged, to make it easier for you. 3. The 52 inch then needs to be mounted at bedroom , dont need bracket for it

Tv cables to run through wall and to mount tv bracket and tv - 65inch tv

Mount TV and hide wire behind the wall

Needing TV taken off wall as we’re moving thanks

Install brackets and mount TV

Need help wall mounting a 75 inch TV. -I don’t have the mount, could buy one -would be great if we could hide the cables into wall but depending on price -defo need the find wall studs and be centred

We would like someone to come out to mount our tv in the living room Please purchase bracket for mounting and we will compensate. Needs to hide all wire etc

Want to get my TCL P7K QLED 2025 wall mount

Wall mount 85’ tv. Cable inside the wall.

Need 85 inch tv wall mounted

I need two TVs mounted on the wall. • One TV is 85 inches. • One TV is 55 inches.

Wall mount required for 70" TV. Model LS70UHDNF23. VESA Wall mount size: 400 x 200mm I will supply the TV bracket from Bunnings. You will have to bring your own tools. I can assist you in lifting the TV during install.

Need to mount tv, already got brackets