20 Sign hanging experts in Melbourne

We need to remove the previous signboard and install our signboard on the outside of the building(roughly 2.5m high) 30cm x 30cm for new sign

Hi guys I need to install a sign (dibond poster 3mm, 550x 750mm) to outdoor wall Thanks

Hang signage to front and side of our building via ladder, scissor lift. Liquid glue, bolts, nails... 2-man job. This Sunday in Abbotsford. Signs are about 3m wide, 1.5m tall. About 3-4 meters of the ground. All necessary tools will be provided. Just labour charge. Must have relevant skills for this task. Should take 1 hour max.

We need a few odd jobs done around our business studio - Screw 6 x door locks onto sliding doors. Simple latch hooks - Fix the front door from swinging in wind - Drill small round sign into wall above a door - Hang 1 x fire extinguisher onto wall Might take around 1/2 hours max

I need a large sign mounted to a 4.5m high brick wall. The sign is in 2 pieces, each approximately 1.2 x 2.0m on lightweight aluminium foamcore panels. Will need to be bolted, the paint is peeling off so it can't be glued. Can supply anchor bolts & SDS drill. You will need tall ladders!

We have recently purchased 3 small wooden laser cut signs which need to be installed. Alls signs are made from 12mm thick plywood with a 5mm black acrylic backing. The smaller signs are 305mmx305mm. The larger sign is 400mmx400mm The two sings by the door can be glued on with a strong silicone/liquid nails. thye are to be installed over two existing aluminium signs of the same dimension. Small holes can be made in the back acrylic to give the silicone something to grip to. The larger sign which goes outside will need screw holes drilled and counter sunk. the existing sign which is the same size is a about 5mm thick aluminium and is held on with 4 nuts. I am hoping to use the same nuts to fix this new sign. The only issue is that the existing thread which is fixed to the brick wall will not be long enough. This is where countersinking the nut may help reach the thread, if not a longer threat will need to be installed.

I'm looking for a handyman to help with a task - hang a signage on a wall (see pics). We need it at height where it can't be reached on foot. You need to bring your own ladder and GOLD dyna bolts. Please see attached image of signage and where we need it installed.

Remove current signage and mount new Individual letters with foam backing on wall

Need sign installed. Have the sign printed on outdoor sticker. Need piece of wood or Perspex cut to size and fixed In position as shown on picture.

We need a handyman / Carpenter to erect a structure on the front of our building and then fasten wooden beams to it to give a artistic look. We can direct on site for accurate finish.