Find a professional garage door installer in QLD

2.6x 1.9m steel /aluminium door - can be sold for scrap metal Keep the profits

need to replace the 2 cabals of the garage door and tension the spring

I'm looking for somebody to remove my existing living room sliding door, and tilt style garage doors and replace with Timber bifolds. I have sourced the bifolds, so looking at installation only. Must have experience with this type of project before please!

Garage door gets stuck at times when opening and closing When checked, was able to confirm its due to motor, which has to be replaced

The garage door need to fix is not working properly

Garage door is playing and need to service. Thanks

Garage door stopped working, the motor is receiving signal but not closing. Need help diagnosing issue and fixing it.

I’ve just reversed into my older style tilt garage door. The tin is really easy to work with.. It will need a new screw into the harder metal frame. I just need someone who might have an idea on repairing this dent and helping me make the garage door close again I can do the cosmetic stuff (repaint) thoughts!?

Installed a new garage/gate motor, but it appears the installation was not completed properly and the system is not operating correctly. Looking for an experienced professional who can inspect, troubleshoot, and properly install/setup the motor so everything works smoothly. This is for a full steel shed with a new steel gate/motor system. Height is approximately 4 metres, so experience working at height is required. Please only contact if you have experience with garage/gate motor installations and repairs.

The bottom edge/panel of the garage door has been pushed in and also dented. The motor/remote works fine. The door still opens and closes smoothly and it's a single garage door as in photo. It just need to get pushed out/bented back. Thank you

Just moved into a new house and one the garage door spring is broken. Looking for quotes to fix. (Supply and install) I’m happy to replace all 4 if they need doing, advise is greatly appreciated.

Hello, we've got our garage roller door making squikkky noise. We need someone to come out and service this please. I'm flexible with dates.

Need the roof of our single-story home painted as well as our double car garage. Also have some wooden paneling at the entry way of the home that I’d love sanded back and painting the same color as the roof and garage to match.

I need a padbolt installed on my garage door so it can be locked. Old garage as per photo. You will need to supply the padbolt. Doesn't need to be fancy.

My garage door doesn’t close and lock. Need someone who can fix it an change the lock.

Our rental property located at Lichfield St in Carina, QLD has a garage and its main door and frame are currently broken. We just need it properly secured to close the garage.

I need a painter. We have paint the primer today and have the protect on the wall. We need someone paint the Dulux monument color watersheild low shine paint. 2 small garage doors. Both Need to paint 2 time. I provide 4L paint. No variation on the site. May need a little bit sand paper to polish. We have the paint and sand paper. You need your brush

Urgently needing help to install a garage door motor today whilst awaiting police assistance to keep my children safe. Happy to pay whatever is needed for someone who can come asap and is experienced in these sort of jobs to ensure it is properly done and garage is inaccessible while police slowly take their time to assist. Garage door motor purchased already. It’s a Chamberlain SectionalLift Plus Sectional Garage Door Opener from Bunnings for a double door. There is an existing old motor which I think I can remove myself if easier for someone to come in and install new one quickly.

Pain the garage door. Notes: 1) Color: Colorbond Surfmist, exterior semi-gloss. The paint could be either Dulux Weathershield tinted to Colorbond Surfmist 2) I already have a 1L Zinsser Bulls Eye 123 Primer) When providing a quote, please share details on the below questions: 1. Preparation: Looking at the scuff marks on the top panels, what is your process for cleaning and sanding the surface before the first coat? 2. Product: What specific brand and product line of primer and topcoat do you intend to use? (e.g., Dulux, Wattyl, etc.) 3. Application: Do you plan to apply the paint via airless spray, or by brush and roller? 4. Coats: How many coats of primer and how many coats of the finish color are included in the price? 5. Logistics: How long will the door need to remain open to ensure the panels don't stick together (blocking) once the job is finished? 6. Protection: Will you be masking off the rubber weather seals and the side tracks, or do you remove them?

I’m seeking repairs on an old garage door. The door currently does not lock. There are two options - install an electric door opener (I have the machine and parts available minute) or raise the door by 5-10cm and fix the wire and “click-lock”. These parts I do not have. Seeking advice and a quote. Ask any questions and will do my best to answer.