Find a professional gate installation in Sydney Northern Beaches

Small, low timber gate needs 2 new hinges.

The top hinge of our timber gate has pulled away from a brick wall. The brick is crumbling around the anchor points and screws are no longer holding. The gate is sagging and not closing properly. Needs proper fixing and secure reattachment. What’s required: - Assess damage to brick and hinge mount - Refill or redrill holes (or offset slightly if needed) - Install appropriate masonry anchors or Dynabolts - Reattach hinge and ensure gate is level and swings smoothly Photos attached for reference. You’ll need to bring: Tools (masonry drill, screws/anchors, filler/epoxy if needed)

Task Title: Repair damaged stone pillar/base near garage (cracks + missing piece, color match) Description: I need a skilled handyman or mason to repair a damaged stone pillar (likely sandstone or similar) at the corner of my front fence. One section/piece of stone is completely missing at the bottom corner (creating a gap). Work required: - Clean out loose debris, old mortar, and unstable sections. - Repoint/re-mortar all cracked joints for stability. - Replace the missing stone piece using a matching color and texture stone or a suitable repair mortar/product that blends seamlessly with the existing tan/brownish stone. - Ensure the repair is weather-resistant and looks natural. Please bring appropriate tools/materials (e.g., color-matched mortar, stone if needed, pointing tools). Photos are attached for reference — it's an outdoor job, easy access. Location: Budget: depending on quotes Availability: Flexible, preferably within the next week or two. Happy to answer questions — looking for someone experienced with stone/masonry repairs. Thanks!

We have two magnetic gates who need repair, one gate is not closing anymore and the other one is getting stuck when people try to open it. We also have some cots that safety pin needs to be repaired

We require a professional concreter to replace a failed section of a communal shared driveway in Bilgola Plateau. This is a full-depth replacement, not a patch job. Project Specifications: * Dimensions: Approximately 2.1m x 4.0m (total area 8.4{m}^2). * Depth: 80mm. * Finish: Exposed Aggregate (gravel finish) to match the existing driveway as closely as possible. * Location: The slab is positioned at the crest of a hill, transitioning from a flat surface to a decline in the drive. Scope of Work: * Demolition: Break up and remove the existing cracked concrete slab (approx. 0.7\m^3). * Prep: Excavate organic material, supply and compact road base to ensure a solid subgrade. * Reinforcement: Supply and install SL82 steel mesh on chairs. * Structural Integrity: Drill and install steel dowels into the adjacent existing concrete slabs to prevent future sinking/movement. * Pour & Finish: Supply and pour concrete (approx. 0.7\m^3). Finish with an exposed aggregate wash to match the surrounding road. Site Access: * The driveway is a single-lane private road. * A large truck can fit down the lane, but a small/medium truck or a line pump may be more suitable. Requirements: * Must have previous experience with exposed aggregate finishes. * Must provide your own tools (concrete saw, jackhammer, etc.). * Please include photos of previous aggregate/driveway work in your offer.

New gate installed, old gate repaired, inside sliding door runner repaired, outside shed door repaired, latches installed outside bbq doors, letterbox installed in same position as old one, dog door installed

Wanting someone to install an electric gate. Can be swing for ease so no need for concrete slab for slide style. I have the manual gate up the top which could be utilized which you can see on the image. Refer to image. Full width is 4.67m. Pole to other side is 4.50m

Aluminium shed door has come off its hinge and needs refitting.side gate won’t close

We need our rotted front gate post replaced with a solid, long‑lasting new one and have the gate working smoothly again. Looking for someone who knows their way around timber posts, concrete footings and gate alignment. About the job The existing timber post on a residential front gate has rotted at the base and needs to be completely replaced. The goal is for the new post to look neat, feel solid and allow the gate to open and close cleanly on the existing hardware. You’ll supply a new treated timber gate post of similar size (4"x6" x approx 2.4m) and appearance to the existing one, suitable for being set in concrete and exposed to the weather. You’ll remove the old post and concrete footing, install a new footing and set the new post plumb and in line with the gate and latch. The existing hinges, fence connection, sensor and cabling will be moved across to the new post and reinstalled so everything works as before. The new post should be painted to match the gate as closely as reasonable, using exterior-grade products you supply. Site and support Easy access at a suburban front gate. Water and power are available on site. You’ll bring your own tools, equipment and materials and leave the area tidy, taking away the old post and any waste. If you have experience with fencing or gate repairs and take pride in a neat finish, please get in touch. Happy to share photos and extra measurements to help you.

Gate has blown off due to heavy winds. Needs to be reconnected on both side sides please refer pictures. Price negotiable - welcome to view to quote

Both side gates need repairing. Wood panels need replacing and requires a new latch

The gate itself has come off its hinges and needs to be reattached. The hardware is all there but we may need some new longer screws. This could mean some fiddling so the hinge screws have fresh timber to be set into but shouldn’t be too challenging for someone who knows what they are doing

Need 13.1 long 1.8m high colorbond with a small gate. Supply and Install(off white colour)

Glasspool gate not locking automatically

W'e're looking for an experienced handyman/carpenter to relocate a garden gate. * Remove existing gate and fence section from current position (photo) * Re-install the same gate a short distance away (see photo of plan) * Re-hang and level the gate so it swings and latches properly * Re-install or adjust hinges/latch as needed * If required: install new fence section and/or set posts in new position (happy to cover cost of concrete and materials)

The bottom tension-loaded hinge on my front gate had pulled away from the hollow metal post. I've tried a few different screws but none have held

Supply and install. 3.5 metres wide. Two swinging gates. 900 swinging person gate. Black steel. Plus automation. Electricity is in place.

We need a handyman or carpenter to reattach the timber gate to our fence.

Repair gate latch on outdoor gate

We need our pool gate hinge and lock fixed or replaced. The pin has come out of the hinge so it doesn’t automatically close. The lock needs a new screw