Find a professional gate installation in Canberra

Need bolts fixed they dont tighten and latch won't stay on

Half of timber side gate is detached from new colorbond fence. May need a new timber? pole to attach to

Double swing gate opener and electrical connection on 4m gate opening outwards

I need a quote to replace the timber gate with colorbond in the backyard. Width - 1645W Post 65x65mm

The steel post on my Colorbond side gate has sheared off at the top joint where it meets the gate frame. Rust has eaten through the steel there, and an old weld repair has also failed. The post is now separated from the frame and the gate can't be secured properly. Photos attached show the break and the corrosion around it. I'd prefer a no-weld fix. Ideally a galvanised L bracket or corner plate bolted or riveted across the joint to reattach the post to the frame. Any rusted sections should be cleaned back and treated, then touched up in a matching off-white/cream. If there isn't enough sound steel left for a bracket to hold, tell me and quote on what sort of repair would work in this situation. Please include in your quote: - How you'd attach it (bracket type, bolts or rivets) - materials are included - Rough time on site Location is Spence, ACT. Easy access via the side of the house. Flexible on timing.

Broken piece of wood off front gate

The gate to my chicken run keeps blowing open because the latch is dodgy. I'd like someone to either fix or replace it so the chooks are secure.

Retractable baby gate to be installed top of stairs. I've found studs on either end. Please bring wall plugs just in case. Model 3137 Perma Retractable Gate

Supply/build (?)/install horizontal slat timber garden gate and install smart lock. Photos of the existing gate and concept for new gate attached, based on: https://www.bunnings.com.au/specrite-1833-x-900mm-pre-oiled-merbau-horizontal-slat-gate_p8500232 - Gate has to be timber and painted to meet body corp rules. If possible, would be good to know how much extra it would cost for painting. Would also like the McGrath Ascot Smart Lock installed (which I can supply): https://www.mcgrathsmartlocks.com.au/product-page/ascot-smart-gate-lock Gate is primarily to keep the dog from getting out when there are e.g. deliveries, so needs to be quite close to the ground.

Have removed gate, need put back up. We have the hinges and screws. Would like asap so little dogs cant escape

I have a double gate. On one side the panel has detached from the frame, and the frame has also come apart at the top corner on the same side. I don't know what's involved in fixing so let me know if you can do it and give me your offer.

Colorbond side gate needs repair. 1.8m x 1.6m Is partly broken in the bottom corners and the gate warps when you try to open/close it.

Our current side gate which is fully installed needs to be reversed. The gate opens inwards to our block but we need to reverse it so it opens outwards instead.

Would like a front fence either aluminium or timber frame with slats, 5,150mm to fence Plus 1200mm path for gate Also, maybe some framing out the carport

I need a simple single swing gate (roughly 85 x 115cm) installed in the chain-link/wire fence in the garden that matches the existing fence style. This may include installing a new fence post as well. For the quote please include the costs for the fence post (if needed), the gate (basic galvanised gate, no automation or fancy ironwork) + labour. Thank you.

2 metre x 2.5 metre metal gate needs priming and painting

Gates on sites either hinge and screw or weld as long as working gates in the end. Flexible and easy access with electricity and water etc. Other work available.

Please advise on specific gate and associated hardware materials required, for me to purchase, and then install these for me. Gate width is approx 1.5m and want it to be approx 1m high