Find a professional gate installation in Canberra

Need to install a retractable baby safety door in the stair safely without any damage. Task is essentially making some drills (8 points), locating stud rightly. Product are something like this: (https://www.bunnings.com.au/perma-child-safety-1-4m-white-wide-retractable-gate-white_p0466947?store=7373&gclsrc=aw.ds&gad_source=1&gad_campaignid=21122993677&gbraid=0AAAAADtbEB8-5AjO42uA_Np5f8uadIX64&gclid=Cj0KCQiA0KrJBhCOARIsAGIy9wAKVUyuQNF7j6glS-bJLxUO_YYO4hwMGP7Q4SUoOxaAmQt9MAIBxEQaAkZEEALw_wcB)

Need to have someone help with assembling a baby gate and installing and drilling to wall to mount it.

I have double colourbond fence that I want double gate opener installed. You supply parts and fit. Does anyone do this as a job don’t want someone who thinks they can do it. Thank you

NB: location is NOT Fadden as listed. Location is Kambah 2902. In need of gate installation on an external deck to block off stairway. Approximate measurements in photos.

Need to replace colourbond fence + hinges etc. don’t have material.

Install two swing gates (custom welded steel framed slat panels about 1800H x 1350W each ), 2 x 100mm steel posts that will need to cut to size and a small 350mm slat panel against a side wall. All the material is here.

The latch on my gate isn’t latching. Was ok until recently. I expect the wind has caused the issue, perhaps bending the hinges.

Remove this steel stump, either by grinding or digging. Take gate away and the 1.5 meters of wooden fencing, dispose of all.

Paint 3.25m wood pailing fence/gate 1.8m high fence both sides Next to house and plants so need to not paint those by accident Want it done in the next week

Dyno bolt has pulled out of brick wall. Brick will need to be patched so a new dyno bolt can be put back in to hold gate up.

I need the child safety gate to be installed at the top of the stairs urgently! The safety gate has already been bought,however there are challenges with installation due to the soft wall.

Replace broken timber garden gate with an aluminium gate (I will supply a kit from https://supergates.com.au/product/fenstar-pedestrian-gate-kit-horizontal-nightsky/ or similar). New gate posts will need to be installed but the original ones can remain as they support dog fencing inside the hedge.

We have to side timber gates that we’d like two new latches that can lock and a timber stain applied to freshen them up. I’d like references.

Our side gate is sagging and needs to be fixed.

Our side gate to the garden has seen better days. The wooden post attached to the brickwork has started to rot, and the gate itself is starting to pull out from it. Post is about 100mm x 75 mm x 1.6m that has a thinner piece of wood attached, that the gates screwed through to the sleeper. Post looks to be secured to the brickwork by 2 long bolts at the top, unsure how secured at the bottom. Hoping to replace the sleeper with some H4 treated pine + the thin bit to keep the gate width and keep the same gate fixtures.

I need 5 curtain cord clasps drilled into a plaster wall at one property then one block away I need one screw drilled into a metal gate to hold a gate latch (old screw snapped off). At same second property I would also like a metal cuff cut off a plastic tube.

I have a new gate that needs to be installed and secured

A metal framed timber clad driveway gate is sagging and the 2 hinges are in need of replacement

My second hand lounge doesn't fit through my front door, so I need assistance lifting it over our side brick wall/gate so I can move it in to the house through the glass door. No cash offers! Payment is strictly through airtasker!

Gate lock installation- already brought the lock - see photos for details