Find a professional gate installation in Bardon

Heavy wooden gate on steel frame to be rehung. Further hinges to be added to door frame. Hinges to be screwed and pop riveted into wood and steel. All hinges, screws, rivets provided. New chisels provided. Tradesman will require own rivet gun and electric drill and bits. Will need to drill out a couple of of broken rivets and redo. Drill bit for steel and wood required.

Our gate is wobbly and needs reinforcing - Due date: Flexible

3 x coats of paint on front wall, approx 300sqm in total for all coats (25 linear meters long). 3 x coats of paint on 1 x iron gate. I will provide paint, rollers, brushes, drop sheets. Walls and gate will be cleaned and prepped, just turn up and paint. - Due date: Needs to be done on Tuesday, 22 August 2023

We have the seats and the child safe gate closers will need current toilet seats removed and replaced and one pool gate closer removed and 2 replaced. - Due date: Flexible

Fence post is loose. It was pushed over in the flood. We don’t think it was dug deep enough when built, so may need a new post. The gate that is attached at the moment doesn’t shut properly, so that needs to be fixed at well - Due date: Flexible

I have a pair of gates that need to be finished. I have a small section of left overs. But need new pailings , they are 76 x19. Needs to be to owners specific requirements. Best option to supply your own extra pailings. Measurements of pailings 1300mm total needed 20 - Due date: Needs to be done on Monday, November 28, 2022

Looking for someone to build a wooden gate at the top of our external stairs. Needs to match existing balcony railing, and be baby proof with a quality lock/latch. - Due date: Flexible

Gate is leaning and therefor not closing correctly. Timber support behind side fencing is rotten and needs replacing. - Due date: Flexible

Timber gates, double leaf, total length 2.4m. Swings outwards. I want the motors installed inside the gate, not outside. The width of car space is quite narrow, so I'd prefer if you can find a way to mount the motor inside the pillars with extendable arms, so they don't take up car space. Or install motors in the car width but they must be narrow profile. One side of the gate is bricks, the other side has a steel post, see pics. There is power supply on a horizontal beam, about 3m away. I am considering buying the below model, but if you have your own preferred models or refurbished motors on hand, I am open to recommendations. http://www.samtgatemotors.com.au/products-page/swing-gate-motors/came-stylo-double-swing-gate-motor-kit/ - Due date: Flexible

Fix Front gate , Brace was originally installed wrong way around causing is to lean against the adjacent post . Also need Latch repaired. - Due date: Before Friday, 1 April 2022

I have a 1.8m timber gate with all the hardware ready to go into an existing 1.8m fence. The current fence would need to have a section taken out to make room and using one existing post there would need to be another post concreted in for the other side as well.

Old metal gate has been bent out of shape, trailer backed into it. - Due date: Flexible

We need our garage fence and gates (2) fixed which were damaged in a car accident. Structure is sound, wooden palings need replacing. Hinges have come off gates. Also need some steps replaced/repaired on external staircase. - Due date: Before Sunday, 30th Jan 2022

Gate hinge has broken and needs welding. No super rush to complete job

Hi, I have a glass pool gate/fence and the door is not closing automatically. It does swing but it looks like one of the hinges is no longer aligned so it catches on the post where the lock is. Thanks,

This gate hinge has snapped - it was only ever spot welded in one spot one each hinge. The top hinge is intact (photo attached). The bottom hinge has snapped. I would like the hinge to be welded back together. The gate is on the front driveway with easy vehicle access. Flexible with dates for completion. thanks

We need to puppy proof our driveway - approximately 6-8 meters of picket fence plus a gate. Love to have this done by the end of this week!

Need a qualified person to: 1. Dig out and remove a timber post and its concrete base; 2. Dig that hole further to 60cm and install a steel post with postcrete. 3. Dig second hole to 60cm depth and install a steel post with postcrete. We provide the two Steel posts - galvanised steel 75mm x 75mm 2.4 m long each. We have 4 x bags of quickset post mix cement. Please provide quote!

Iron gate fallen off hinges. Also needs realignment. And repair of closure plates. It was once automatic. Happy for manual locking lock.

Remove outdoor gate from it's hinges and install the hinges and lock on the other side of the fence. It was installed on a non supporting post and is pulling the fence down.. Pics attached. Date and time is flexible