Find a professional gate installation in VIC

1. Install external isolation switch (no external power, need to break out from internal GPO) - yet to buy materials as I wasn't sure if required 2. Install external GPO on fence post - have hardware 3. Replace 3x external lights to down lights with plug base outlet - have hardware 4. Replace sensor light and convert plug base outlet - have hardware

The double swing gate with Aleko opener • One leaf is noticeably faster than the other • The closing part is not done properly and completely closed Unsure if the problem is aging motor, hinges, uneven ground or whatever issues, wanna it be fixed and open & close properly

One side of front gate not returning to closed position. Motor is working but something must be wrong or disconnected with the return mechanism. I have had to disengage the lock/unlock grey lever to open and close that side of the gate.

Front sliding gate currently has an old remote opener that runs extremely slow and often gets stuck. Looking to replace this with a new opener that can handle the double length gate. Installation may require preparation of ground/gate/tracks to ensure it runs smoothly and will last.

Install electric gate to rear of corner block Wooden gates already there

Looking for someone to remove the old automatic gate system and install a new one. Gate controls need full replacement. Please quote for labour and parts. Location: Airport West, VIC 3042. Experienced gate technician required.

There is an issue with the automatic gate which i’m not sure what the cause is. We need someone to fix the gate and make it functional

The automatic gate motor is not working, the wheels came off.

I need a new front fence with sliding automatic gate, and a new back fence with a pedestrian gate. The old fence will need to be removed

2 swing gates, need automatic opening. *Power available *Need over concrete cover * can provide system * or you can provide system product. City of Knox Do not quote if you exceed $350 (unless you are providing the system) PS: I have researched prices (Kenner and such) , do not high ball .. Thanks

Automatic gate has stopped working. Checked the remotes and all ok. Looking for someone to have a look at it today

The automatic gate has the unit there but the wires have all been cut. There is also no remote or key with the system

power tech pl500 stop working

Install an automatic gate in a 4.4m wide space. The gate needs to open outwards with a remote controller. The gate could be a single swing gate or 2 swing gates for better strength

I need to get a metal fence automatic in front of my house. The size of the fence is 12.7m long, i already got a quote of $5,400 please do bid correctly.

The screws on one of the automatic gates have loosen

Looking to have an automatic gate hinge welded. Automatic gate arm has snapped from itself Previously was welded once before in a spot where the arm had snapped---has done so again due to a car wheel hitting it. Basic straight and short weld but I do not have means to do so.

Today’s wind has broken it off at the bottom hinge and it’s barely hanging off at the hinges. Will need to be welded, new hinges and reinforced by the looks. - Due date: Flexible

Install automatic gate in the driveway

Someone to supply and program 3 remotes (2 functions on gate) fixed code gate 433.92. Can supply images and models

Looking for a carpenter/handyman to supply materials and complete a gate job at my property in Malvern. Scope of work: 1. New Gate (Main Job) * Cut opening in existing timber paling fence * Supply and install 2 new posts * Build and install timber gate * Include all hinges, latch and drop bolt * Match existing fence as best as practical * Doesn’t need to be high-end — just solid and functional 2. Fix Existing Side Gate Side gate currently not closing properly Needs adjustment Requirements: All materials supplied by you Must be sturdy and built to last Previous experience with similar work

Front timber gate has had movement and drags on concrete pathway Needs to be removed and adjusted

See pictures attached for your reference one side gate has fallen. Need timber post and bolting the door to timber post I believe

Looking for a handyman to tidy up a timber gate post that was poorly built. It’s structurally fine but the outer boards are uneven and patched. Job would involve: Removing some outer boards Re-cladding with straight timber Squaring up edges Filling/sanding joins Prepping ready for paint (or painting if possible) I have timber offcuts available that can be used. Located in Brunswick East. Flexible with timing but hoping to get it done soon as the house is being prepared for sale.

Fence Timber Gate has come off, need help to put same gate back.

Timber side gate to be replaced. New one to be purchased from bunnings. Product image of the one to be replaced. May need side post replacement

Raise timber gate by 10cm. Add a 10cm high block of wood underneath the raised gate so minimal gap to ground. No painting required

Timber frame of outdoor gate has split and the fence has come off from the frame completely so needs a new frame and gate to be re attached

1 gate to replace existing, 1 gate to enclose underhouse space, are required. Pererred material is timber.

Repair timber driveway gate

need to install 2 x Timber gates exactly the same dimensions to side of property/ also happy for Colourbond gate as option

Side timber gate has shifted or expanded. Last paling needs planing or sanding. Require someone with right equipment to fix. Perhaps the gate has shifted but hinges look ok.

Backyard gate replacement needed as old gate has worn down. Timber preferred over Colourbond. 2.3m width X 2m height. Seeking quotes to compare.

We need this timber gate hung (it is currently just resting in place). The post isn’t as tall as the gate so it may need some different hinges. You will need to supply whatever hinges you think would work best or if you can use the existing hinge and move it down that would be fine.

Fix timber gate Repair or replace broken gate/door hinge

To fix a timber gate to my house backyard. The available space is 1800 mm. It can be done by 2x900 ready made timber gates from Bunnings

Need a 1200 swing out gate installed with a door handle. Swing out. Need posts aswell.

I have a timber fence with gate at the side of my home that has a post that has twisted and needs to be rebuilt ( or post trimmed ) to enable the gate to close

Need a timber gate done here. Between two garages. So Treated pine bolted to both sides and timber paling. 1.8-2.1 high, to be confirmed

Gate fell off. Need to fix it on the wall. I think need special screw to tight on the brick wall